FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Wind Pressure acting on Upper Part of Vessel Formula

Fx Copy

LaTeX Copy

Wind Pressure acting on Upper Part of Vessel is known as wind load based on the size, shape and location of the structure, as well as the wind velocity and direction. Check FAQs

p 2 = \frac{P uw}{k 1 \cdot k coefficient \cdot h 2 \cdot D o}

p₂ - Wind Pressure acting on Upper Part of Vessel?P_uw - Wind Load acting on Upper Part of Vessel?k₁ - Coefficient depending on Shape Factor?k_coefficient - Coefficient Period of One Cycle of Vibration?h₂ - Height of Upper Part of Vessel?D_o - Outside Diameter of Vessel?

Wind Pressure acting on Upper Part of Vessel Example

With values

With units

Only example

Here is how the Wind Pressure acting on Upper Part of Vessel equation looks like with Values.

Here is how the Wind Pressure acting on Upper Part of Vessel equation looks like with Units.

Here is how the Wind Pressure acting on Upper Part of Vessel equation looks like.

39.7016 = \frac{119}{0.69 \cdot 4 \cdot 1.81 \cdot 0.6}

39.7016N/m² = \frac{119N}{0.69 \cdot 4 \cdot 1.81m \cdot 0.6m}

39.7016 = \frac{119}{0.69 \cdot 4 \cdot 1.81 \cdot 0.6}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Wind Pressure acting on Upper Part of Vessel

Wind Pressure acting on Upper Part of Vessel Solution

Follow our step by step solution on how to calculate Wind Pressure acting on Upper Part of Vessel?

FIRST Step Consider the formula

p 2 = \frac{P uw}{k 1 \cdot k coefficient \cdot h 2 \cdot D o}

Next Step Substitute values of Variables

∴

p 2 = \frac{119N}{0.69 \cdot 4 \cdot 1.81m \cdot 0.6m}

Next Step Prepare to Evaluate

∴

p 2 = \frac{119}{0.69 \cdot 4 \cdot 1.81 \cdot 0.6}

Next Step Evaluate

∴

p 2 = 39.7016040782555Pa

Next Step Convert to Output's Unit

∴

p 2 = 39.7016040782555N/m²

LAST Step Rounding Answer

∴

p 2 = 39.7016N/m²

Wind Pressure acting on Upper Part of Vessel Formula Elements

Variables

Wind Pressure acting on Upper Part of Vessel

Wind Pressure acting on Upper Part of Vessel is known as wind load based on the size, shape and location of the structure, as well as the wind velocity and direction.

Symbol: p₂

Measurement: PressureUnit: N/m²

Note: Value should be greater than 0.

Formulas to find Wind Pressure acting on Upper Part of Vessel

Wind Load acting on Upper Part of Vessel

Wind Load acting on Upper Part of Vessel refers to the external force exerted by wind on the exposed surface area of the vessel above a certain height.

Symbol: P_uw

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Wind Load acting on Upper Part of Vessel

Coefficient depending on Shape Factor

Coefficient depending on Shape Factor is used in statistics to measure the relationship between a particular shape factor and the outcome of a given experiment or trial.

Symbol: k₁

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Coefficient depending on Shape Factor

Coefficient Period of One Cycle of Vibration

Coefficient Period of one cycle of vibration is determined by the mass and stiffness of the vessel, as well as the damping characteristics and the excitation frequency of the vibratory force.

Symbol: k_coefficient

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Coefficient Period of One Cycle of Vibration

Height of Upper Part of Vessel

Height of Upper Part of Vessel is typically defined as the distance from the bottom of the vessel to a certain point above the liquid level.

Symbol: h₂

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Height of Upper Part of Vessel

Outside Diameter of Vessel

Outside Diameter of Vessel is the maximum distance between two points on the outer surface of the vessel.

Symbol: D_o

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Outside Diameter of Vessel

Other formulas in Design of Anchor Bolt and Bolting Chair category

Go Diameter of Anchor Bolt Circle

D bc = \frac{(4 \cdot (Wind Force)) \cdot (Height - c)}{N \cdot P Load}

Go Height of Lower Part of Vessel

h 1 = \frac{P lw}{k 1 \cdot k coefficient \cdot p 1 \cdot D o}

Go Height of Upper Part of Vessel

h 2 = \frac{P uw}{k 1 \cdot k coefficient \cdot p 2 \cdot D o}

Go Load on Each Bolt

P bolt = f c \cdot (\frac{A}{n})

How to Evaluate Wind Pressure acting on Upper Part of Vessel?

Wind Pressure acting on Upper Part of Vessel evaluator uses Wind Pressure acting on Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Height of Upper Part of Vessel*Outside Diameter of Vessel) to evaluate the Wind Pressure acting on Upper Part of Vessel, Wind Pressure acting on Upper Part of Vessel refers to the force exerted by the wind on the exposed surface area of the vessel's upper part. Wind Pressure acting on Upper Part of Vessel is denoted by p₂ symbol.

How to evaluate Wind Pressure acting on Upper Part of Vessel using this online evaluator? To use this online evaluator for Wind Pressure acting on Upper Part of Vessel, enter Wind Load acting on Upper Part of Vessel (P_uw), Coefficient depending on Shape Factor (k₁), Coefficient Period of One Cycle of Vibration (k_coefficient), Height of Upper Part of Vessel (h₂) & Outside Diameter of Vessel (D_o) and hit the calculate button.

FAQs on Wind Pressure acting on Upper Part of Vessel

What is the formula to find Wind Pressure acting on Upper Part of Vessel?

The formula of Wind Pressure acting on Upper Part of Vessel is expressed as Wind Pressure acting on Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Height of Upper Part of Vessel*Outside Diameter of Vessel). Here is an example- 39.7016 = 119/(0.69*4*1.81*0.6).

How to calculate Wind Pressure acting on Upper Part of Vessel?

With Wind Load acting on Upper Part of Vessel (P_uw), Coefficient depending on Shape Factor (k₁), Coefficient Period of One Cycle of Vibration (k_coefficient), Height of Upper Part of Vessel (h₂) & Outside Diameter of Vessel (D_o) we can find Wind Pressure acting on Upper Part of Vessel using the formula - Wind Pressure acting on Upper Part of Vessel = Wind Load acting on Upper Part of Vessel/(Coefficient depending on Shape Factor*Coefficient Period of One Cycle of Vibration*Height of Upper Part of Vessel*Outside Diameter of Vessel).

Can the Wind Pressure acting on Upper Part of Vessel be negative?

No, the Wind Pressure acting on Upper Part of Vessel, measured in Pressure cannot be negative.

Which unit is used to measure Wind Pressure acting on Upper Part of Vessel?

Wind Pressure acting on Upper Part of Vessel is usually measured using the Newton per Square Meter[N/m²] for Pressure. Pascal[N/m²], Kilopascal[N/m²], Bar[N/m²] are the few other units in which Wind Pressure acting on Upper Part of Vessel can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Wind Pressure acting on Upper Part of Vessel Formula

Wind Pressure acting on Upper Part of Vessel Example

Wind Pressure acting on Upper Part of Vessel Solution

Wind Pressure acting on Upper Part of Vessel Formula Elements

Other formulas in Design of Anchor Bolt and Bolting Chair category

How to Evaluate Wind Pressure acting on Upper Part of Vessel?

FAQs on Wind Pressure acting on Upper Part of Vessel

Variable Name