FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Width of Section given Wetted Perimeters in Section Formula

GoWidth of Section given Wetted Area for Trapezoidal Formula

GoWidth of Sections given Hydraulic Radius Formula

Fx Copy

LaTeX Copy

Width of Trap Channel is the width of the trapezoidal cross-section of the beam parallel to the axis in consideration. Check FAQs

B trap = P Trap - 2 \cdot d f(trap) \cdot (\sqrt{z trap \cdot z trap + 1})

B_trap - Width of Trap Channel?P_Trap - Wetted Perimeter of Trapezoidal Channel?d_f(trap) - Depth of Flow of Trapezoidal Channel?z_trap - Side slope of Trapezoidal Channel?

Width of Section given Wetted Perimeters in Section Example

With values

With units

Only example

Here is how the Width of Section given Wetted Perimeters in Section equation looks like with Values.

Here is how the Width of Section given Wetted Perimeters in Section equation looks like with Units.

Here is how the Width of Section given Wetted Perimeters in Section equation looks like.

3.764 = 11.43 - 2 \cdot 3.32 \cdot (\sqrt{0.577 \cdot 0.577 + 1})

3.764m = 11.43m - 2 \cdot 3.32m \cdot (\sqrt{0.577 \cdot 0.577 + 1})

3.764 = 11.43 - 2 \cdot 3.32 \cdot (\sqrt{0.577 \cdot 0.577 + 1})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Width of Section given Wetted Perimeters in Section

Width of Section given Wetted Perimeters in Section Solution

Follow our step by step solution on how to calculate Width of Section given Wetted Perimeters in Section?

FIRST Step Consider the formula

B trap = P Trap - 2 \cdot d f(trap) \cdot (\sqrt{z trap \cdot z trap + 1})

Next Step Substitute values of Variables

∴

B trap = 11.43m - 2 \cdot 3.32m \cdot (\sqrt{0.577 \cdot 0.577 + 1})

Next Step Prepare to Evaluate

∴

B trap = 11.43 - 2 \cdot 3.32 \cdot (\sqrt{0.577 \cdot 0.577 + 1})

Next Step Evaluate

∴

B trap = 3.76395105426531m

LAST Step Rounding Answer

∴

B trap = 3.764m

Width of Section given Wetted Perimeters in Section Formula Elements

Variables

Functions

Width of Trap Channel

Width of Trap Channel is the width of the trapezoidal cross-section of the beam parallel to the axis in consideration.

Symbol: B_trap

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Width of Trap Channel

Wetted Perimeter of Trapezoidal Channel

Wetted Perimeter of Trapezoidal Channel is defined as the surface of the channel bottom and sides in direct contact with the aqueous body.

Symbol: P_Trap

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Wetted Perimeter of Trapezoidal Channel

Depth of Flow of Trapezoidal Channel

Depth of Flow of Trapezoidal Channel is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.

Symbol: d_f(trap)

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Depth of Flow of Trapezoidal Channel

Side slope of Trapezoidal Channel

Side slope of Trapezoidal Channel is side slope of trapezoidal channel, defined as horizontal to vertical ratio.

Symbol: z_trap

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Side slope of Trapezoidal Channel

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other Formulas to find Width of Trap Channel

Go Width of Section given Wetted Area for Trapezoidal

B trap = (\frac{S Trap}{d f(trap)}) - (z trap \cdot d f(trap))

Go Width of Sections given Hydraulic Radius

B trap = \frac{2 \cdot R H(Trap) \cdot d f(trap) \cdot \sqrt{{z trap}^{2} + 1} - z trap \cdot {d f(trap)}^{2}}{d f(trap) - R H(Trap)}

Go Width of Section given Top Width

B trap = T Trap - 2 \cdot d f(trap) \cdot z trap

Go Width of Section given Hydraulic Depth

B trap = \frac{(d f(trap) \cdot z trap \cdot d f(trap)) - D Trap \cdot 2 \cdot d f(trap) \cdot z trap}{D Trap - d f(trap)}

Other formulas in Geometrical Properties of Trapezoidal Channel Section category

Go Wetted Area for Trapezoidal

S Trap = (B trap + z trap \cdot d f(trap)) \cdot d f(trap)

Go Side Slope of Section given Wetted Area of Trapezoidal

z trap = \frac{(\frac{S Trap}{d f(trap)}) - B trap}{d f(trap)}

Go Wetted Perimeter for Trapezoidal

P Trap = B trap + 2 \cdot d f(trap) \cdot (\sqrt{z trap \cdot z trap + 1})

Go Side Slope of Section given Perimeter

z trap = \sqrt{({(\frac{P Trap - B trap}{2 \cdot d f(trap)})}^{2}) - 1}

How to Evaluate Width of Section given Wetted Perimeters in Section?

Width of Section given Wetted Perimeters in Section evaluator uses Width of Trap Channel = Wetted Perimeter of Trapezoidal Channel-2*Depth of Flow of Trapezoidal Channel*(sqrt(Side slope of Trapezoidal Channel*Side slope of Trapezoidal Channel+1)) to evaluate the Width of Trap Channel, The Width of Section given Wetted Perimeters in Section is defined as the channel width measured in direction perpendicular to flow. Width of Trap Channel is denoted by B_trap symbol.

How to evaluate Width of Section given Wetted Perimeters in Section using this online evaluator? To use this online evaluator for Width of Section given Wetted Perimeters in Section, enter Wetted Perimeter of Trapezoidal Channel (P_Trap), Depth of Flow of Trapezoidal Channel (d_f(trap)) & Side slope of Trapezoidal Channel (z_trap) and hit the calculate button.

FAQs on Width of Section given Wetted Perimeters in Section

What is the formula to find Width of Section given Wetted Perimeters in Section?

The formula of Width of Section given Wetted Perimeters in Section is expressed as Width of Trap Channel = Wetted Perimeter of Trapezoidal Channel-2*Depth of Flow of Trapezoidal Channel*(sqrt(Side slope of Trapezoidal Channel*Side slope of Trapezoidal Channel+1)). Here is an example- 3.810132 = 11.43-2*3.32*(sqrt(0.577*0.577+1)).

How to calculate Width of Section given Wetted Perimeters in Section?

With Wetted Perimeter of Trapezoidal Channel (P_Trap), Depth of Flow of Trapezoidal Channel (d_f(trap)) & Side slope of Trapezoidal Channel (z_trap) we can find Width of Section given Wetted Perimeters in Section using the formula - Width of Trap Channel = Wetted Perimeter of Trapezoidal Channel-2*Depth of Flow of Trapezoidal Channel*(sqrt(Side slope of Trapezoidal Channel*Side slope of Trapezoidal Channel+1)). This formula also uses Square Root (sqrt) function(s).

What are the other ways to Calculate Width of Trap Channel?

Here are the different ways to Calculate Width of Trap Channel-

Width of Trap Channel=(Wetted Surface Area of Trapezoidal Channel/Depth of Flow of Trapezoidal Channel)-(Side slope of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel)
Width of Trap Channel=(2*Hydraulic Radius of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel*sqrt(Side slope of Trapezoidal Channel^2+1)-Side slope of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel^2)/(Depth of Flow of Trapezoidal Channel-Hydraulic Radius of Trapezoidal Channel)
Width of Trap Channel=Top Width of Trapezoidal Channel-2*Depth of Flow of Trapezoidal Channel*Side slope of Trapezoidal Channel

Can the Width of Section given Wetted Perimeters in Section be negative?

Yes, the Width of Section given Wetted Perimeters in Section, measured in Length can be negative.

Which unit is used to measure Width of Section given Wetted Perimeters in Section?

Width of Section given Wetted Perimeters in Section is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Width of Section given Wetted Perimeters in Section can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Width of Section given Wetted Perimeters in Section Formula

​GoWidth of Section given Wetted Area for Trapezoidal Formula

​GoWidth of Sections given Hydraulic Radius Formula

Width of Section given Wetted Perimeters in Section Example

Width of Section given Wetted Perimeters in Section Solution

Width of Section given Wetted Perimeters in Section Formula Elements

Other Formulas to find Width of Trap Channel

Other formulas in Geometrical Properties of Trapezoidal Channel Section category

How to Evaluate Width of Section given Wetted Perimeters in Section?

FAQs on Width of Section given Wetted Perimeters in Section

Variable Name

GoWidth of Section given Wetted Area for Trapezoidal Formula

GoWidth of Sections given Hydraulic Radius Formula