FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Width of Section given Wetted Area for Trapezoidal Formula

GoWidth of Section given Wetted Perimeters in Section Formula

GoWidth of Sections given Hydraulic Radius Formula

Fx Copy

LaTeX Copy

Width of Trap Channel is the width of the trapezoidal cross-section of the beam parallel to the axis in consideration. Check FAQs

B trap = (\frac{S Trap}{d f(trap)}) - (z trap \cdot d f(trap))

B_trap - Width of Trap Channel?S_Trap - Wetted Surface Area of Trapezoidal Channel?d_f(trap) - Depth of Flow of Trapezoidal Channel?z_trap - Side slope of Trapezoidal Channel?

Width of Section given Wetted Area for Trapezoidal Example

With values

With units

Only example

Here is how the Width of Section given Wetted Area for Trapezoidal equation looks like with Values.

Here is how the Width of Section given Wetted Area for Trapezoidal equation looks like with Units.

Here is how the Width of Section given Wetted Area for Trapezoidal equation looks like.

3.7651 = (\frac{18.86}{3.32}) - (0.577 \cdot 3.32)

3.7651m = (\frac{18.86m²}{3.32m}) - (0.577 \cdot 3.32m)

3.7651 = (\frac{18.86}{3.32}) - (0.577 \cdot 3.32)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Width of Section given Wetted Area for Trapezoidal

Width of Section given Wetted Area for Trapezoidal Solution

Follow our step by step solution on how to calculate Width of Section given Wetted Area for Trapezoidal?

FIRST Step Consider the formula

B trap = (\frac{S Trap}{d f(trap)}) - (z trap \cdot d f(trap))

Next Step Substitute values of Variables

∴

B trap = (\frac{18.86m²}{3.32m}) - (0.577 \cdot 3.32m)

Next Step Prepare to Evaluate

∴

B trap = (\frac{18.86}{3.32}) - (0.577 \cdot 3.32)

Next Step Evaluate

∴

B trap = 3.76508289156627m

LAST Step Rounding Answer

∴

B trap = 3.7651m

Width of Section given Wetted Area for Trapezoidal Formula Elements

Variables

Width of Trap Channel

Width of Trap Channel is the width of the trapezoidal cross-section of the beam parallel to the axis in consideration.

Symbol: B_trap

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Width of Trap Channel

Wetted Surface Area of Trapezoidal Channel

Wetted Surface Area of Trapezoidal Channel [length^2] is the total area of outer surface in contact with the surrounding water.

Symbol: S_Trap

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Wetted Surface Area of Trapezoidal Channel

Depth of Flow of Trapezoidal Channel

Depth of Flow of Trapezoidal Channel is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.

Symbol: d_f(trap)

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Depth of Flow of Trapezoidal Channel

Side slope of Trapezoidal Channel

Side slope of Trapezoidal Channel is side slope of trapezoidal channel, defined as horizontal to vertical ratio.

Symbol: z_trap

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Side slope of Trapezoidal Channel

Other Formulas to find Width of Trap Channel

Go Width of Section given Wetted Perimeters in Section

B trap = P Trap - 2 \cdot d f(trap) \cdot (\sqrt{z trap \cdot z trap + 1})

Go Width of Sections given Hydraulic Radius

B trap = \frac{2 \cdot R H(Trap) \cdot d f(trap) \cdot \sqrt{{z trap}^{2} + 1} - z trap \cdot {d f(trap)}^{2}}{d f(trap) - R H(Trap)}

Go Width of Section given Top Width

B trap = T Trap - 2 \cdot d f(trap) \cdot z trap

Go Width of Section given Hydraulic Depth

B trap = \frac{(d f(trap) \cdot z trap \cdot d f(trap)) - D Trap \cdot 2 \cdot d f(trap) \cdot z trap}{D Trap - d f(trap)}

Other formulas in Geometrical Properties of Trapezoidal Channel Section category

Go Wetted Area for Trapezoidal

S Trap = (B trap + z trap \cdot d f(trap)) \cdot d f(trap)

Go Side Slope of Section given Wetted Area of Trapezoidal

z trap = \frac{(\frac{S Trap}{d f(trap)}) - B trap}{d f(trap)}

Go Wetted Perimeter for Trapezoidal

P Trap = B trap + 2 \cdot d f(trap) \cdot (\sqrt{z trap \cdot z trap + 1})

Go Side Slope of Section given Perimeter

z trap = \sqrt{({(\frac{P Trap - B trap}{2 \cdot d f(trap)})}^{2}) - 1}

How to Evaluate Width of Section given Wetted Area for Trapezoidal?

Width of Section given Wetted Area for Trapezoidal evaluator uses Width of Trap Channel = (Wetted Surface Area of Trapezoidal Channel/Depth of Flow of Trapezoidal Channel)-(Side slope of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel) to evaluate the Width of Trap Channel, The Width of Section given Wetted Area for Trapezoidal is defined as the sectional width in direction perpendicular to the flow measured from sides. Width of Trap Channel is denoted by B_trap symbol.

How to evaluate Width of Section given Wetted Area for Trapezoidal using this online evaluator? To use this online evaluator for Width of Section given Wetted Area for Trapezoidal, enter Wetted Surface Area of Trapezoidal Channel (S_Trap), Depth of Flow of Trapezoidal Channel (d_f(trap)) & Side slope of Trapezoidal Channel (z_trap) and hit the calculate button.

FAQs on Width of Section given Wetted Area for Trapezoidal

What is the formula to find Width of Section given Wetted Area for Trapezoidal?

The formula of Width of Section given Wetted Area for Trapezoidal is expressed as Width of Trap Channel = (Wetted Surface Area of Trapezoidal Channel/Depth of Flow of Trapezoidal Channel)-(Side slope of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel). Here is an example- 3.811052 = (18.86/3.32)-(0.577*3.32).

How to calculate Width of Section given Wetted Area for Trapezoidal?

With Wetted Surface Area of Trapezoidal Channel (S_Trap), Depth of Flow of Trapezoidal Channel (d_f(trap)) & Side slope of Trapezoidal Channel (z_trap) we can find Width of Section given Wetted Area for Trapezoidal using the formula - Width of Trap Channel = (Wetted Surface Area of Trapezoidal Channel/Depth of Flow of Trapezoidal Channel)-(Side slope of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel).

What are the other ways to Calculate Width of Trap Channel?

Here are the different ways to Calculate Width of Trap Channel-

Width of Trap Channel=Wetted Perimeter of Trapezoidal Channel-2*Depth of Flow of Trapezoidal Channel*(sqrt(Side slope of Trapezoidal Channel*Side slope of Trapezoidal Channel+1))
Width of Trap Channel=(2*Hydraulic Radius of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel*sqrt(Side slope of Trapezoidal Channel^2+1)-Side slope of Trapezoidal Channel*Depth of Flow of Trapezoidal Channel^2)/(Depth of Flow of Trapezoidal Channel-Hydraulic Radius of Trapezoidal Channel)
Width of Trap Channel=Top Width of Trapezoidal Channel-2*Depth of Flow of Trapezoidal Channel*Side slope of Trapezoidal Channel

Can the Width of Section given Wetted Area for Trapezoidal be negative?

Yes, the Width of Section given Wetted Area for Trapezoidal, measured in Length can be negative.

Which unit is used to measure Width of Section given Wetted Area for Trapezoidal?

Width of Section given Wetted Area for Trapezoidal is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Width of Section given Wetted Area for Trapezoidal can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Width of Section given Wetted Area for Trapezoidal Formula

​GoWidth of Section given Wetted Perimeters in Section Formula

​GoWidth of Sections given Hydraulic Radius Formula

Width of Section given Wetted Area for Trapezoidal Example

Width of Section given Wetted Area for Trapezoidal Solution

Width of Section given Wetted Area for Trapezoidal Formula Elements

Other Formulas to find Width of Trap Channel

Other formulas in Geometrical Properties of Trapezoidal Channel Section category

How to Evaluate Width of Section given Wetted Area for Trapezoidal?

FAQs on Width of Section given Wetted Area for Trapezoidal

Variable Name

GoWidth of Section given Wetted Perimeters in Section Formula

GoWidth of Sections given Hydraulic Radius Formula