FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Width of Roller given Compaction Production by Compaction Equipment Formula

Fx Copy

LaTeX Copy

Width of Roller is the physical width of the roller used in compaction processes, such as those employed in soil and pavement construction. Check FAQs

W = \frac{y \cdot P}{16 \cdot S \cdot L \cdot PR \cdot E}

W - Width of Roller?y - Production due to Compaction?P - Number of Passes?S - Roller Speed?L - Lift Thickness?PR - Pay Ratio?E - Efficiency Factor?

Width of Roller given Compaction Production by Compaction Equipment Example

With values

With units

Only example

Here is how the Width of Roller given Compaction Production by Compaction Equipment equation looks like with Values.

Here is how the Width of Roller given Compaction Production by Compaction Equipment equation looks like with Units.

Here is how the Width of Roller given Compaction Production by Compaction Equipment equation looks like.

2.8899 = \frac{297.59 \cdot 5}{16 \cdot 3 \cdot 7.175 \cdot 2.99 \cdot 0.5}

2.8899m = \frac{297.59m³/hr \cdot 5}{16 \cdot 3km/h \cdot 7.175mm \cdot 2.99m³ \cdot 0.5}

2.8899 = \frac{297.59 \cdot 5}{16 \cdot 3 \cdot 7.175 \cdot 2.99 \cdot 0.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Width of Roller given Compaction Production by Compaction Equipment

Width of Roller given Compaction Production by Compaction Equipment Solution

Follow our step by step solution on how to calculate Width of Roller given Compaction Production by Compaction Equipment?

FIRST Step Consider the formula

W = \frac{y \cdot P}{16 \cdot S \cdot L \cdot PR \cdot E}

Next Step Substitute values of Variables

∴

W = \frac{297.59m³/hr \cdot 5}{16 \cdot 3km/h \cdot 7.175mm \cdot 2.99m³ \cdot 0.5}

Next Step Convert Units

∴

W = \frac{0.0827m³/s \cdot 5}{16 \cdot 0.8333m/s \cdot 0.0072m \cdot 2.99m³ \cdot 0.5}

Next Step Prepare to Evaluate

∴

W = \frac{0.0827 \cdot 5}{16 \cdot 0.8333 \cdot 0.0072 \cdot 2.99 \cdot 0.5}

Next Step Evaluate

∴

W = 2.88990790051236m

LAST Step Rounding Answer

∴

W = 2.8899m

Width of Roller given Compaction Production by Compaction Equipment Formula Elements

Variables

Width of Roller

Width of Roller is the physical width of the roller used in compaction processes, such as those employed in soil and pavement construction.

Symbol: W

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Width of Roller

Production due to Compaction

Production due to Compaction is the exertion of force on something so that it becomes denser.

Symbol: y

Measurement: Volumetric Flow RateUnit: m³/hr

Note: Value should be greater than 0.

Formulas to find Production due to Compaction

Number of Passes

Number of Passes is the number of times a compactor (such as a vibratory roller or a plate compactor) passes over a specific area of soil or aggregate during compaction.

Symbol: P

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Number of Passes

Roller Speed

Roller Speed is the velocity at which a compaction roller moves over soil or other materials during the compaction process.

Symbol: S

Measurement: SpeedUnit: km/h

Note: Value should be greater than 0.

Formulas to find Roller Speed

Lift Thickness

Lift Thickness is the depth of a compacted layer of fill material placed during construction. This term is important in the compaction process, where fill material is often placed in layers.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Lift Thickness

Pay Ratio

Pay Ratio is the ratio between the effective stress and the total stress in soil mechanics.

Symbol: PR

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Pay Ratio

Efficiency Factor

The Efficiency Factor is a dimensionless parameter used to relate the strength or stiffness of improved soil (after treatment) to its original, untreated state.

Symbol: E

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Efficiency Factor

Other formulas in Compaction Equipment category

Go Compaction Production by Compaction Equipment

y = \frac{16 \cdot W \cdot S \cdot L \cdot E \cdot PR}{P}

Go Speed of Roller given Compaction Production by Compaction Equipment

S = \frac{y \cdot P}{16 \cdot W \cdot L \cdot PR \cdot E}

How to Evaluate Width of Roller given Compaction Production by Compaction Equipment?

Width of Roller given Compaction Production by Compaction Equipment evaluator uses Width of Roller = (Production due to Compaction*Number of Passes)/(16*Roller Speed*Lift Thickness*Pay Ratio*Efficiency Factor) to evaluate the Width of Roller, The Width of Roller given Compaction Production by Compaction Equipment formula is defined as the effective width of the roller used in soil compaction processes. This parameter is crucial because it directly affects the efficiency and effectiveness of compaction operations. Width of Roller is denoted by W symbol.

How to evaluate Width of Roller given Compaction Production by Compaction Equipment using this online evaluator? To use this online evaluator for Width of Roller given Compaction Production by Compaction Equipment, enter Production due to Compaction (y), Number of Passes (P), Roller Speed (S), Lift Thickness (L), Pay Ratio (PR) & Efficiency Factor (E) and hit the calculate button.

FAQs on Width of Roller given Compaction Production by Compaction Equipment

What is the formula to find Width of Roller given Compaction Production by Compaction Equipment?

The formula of Width of Roller given Compaction Production by Compaction Equipment is expressed as Width of Roller = (Production due to Compaction*Number of Passes)/(16*Roller Speed*Lift Thickness*Pay Ratio*Efficiency Factor). Here is an example- 2.715109 = (0.0826638888888889*5)/(16*0.833333333333333*0.007175*2.99*0.5).

How to calculate Width of Roller given Compaction Production by Compaction Equipment?

With Production due to Compaction (y), Number of Passes (P), Roller Speed (S), Lift Thickness (L), Pay Ratio (PR) & Efficiency Factor (E) we can find Width of Roller given Compaction Production by Compaction Equipment using the formula - Width of Roller = (Production due to Compaction*Number of Passes)/(16*Roller Speed*Lift Thickness*Pay Ratio*Efficiency Factor).

Can the Width of Roller given Compaction Production by Compaction Equipment be negative?

No, the Width of Roller given Compaction Production by Compaction Equipment, measured in Length cannot be negative.

Which unit is used to measure Width of Roller given Compaction Production by Compaction Equipment?

Width of Roller given Compaction Production by Compaction Equipment is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Width of Roller given Compaction Production by Compaction Equipment can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Width of Roller given Compaction Production by Compaction Equipment Formula

Width of Roller given Compaction Production by Compaction Equipment Example

Width of Roller given Compaction Production by Compaction Equipment Solution

Width of Roller given Compaction Production by Compaction Equipment Formula Elements

Other formulas in Compaction Equipment category

How to Evaluate Width of Roller given Compaction Production by Compaction Equipment?

FAQs on Width of Roller given Compaction Production by Compaction Equipment

Variable Name