FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Width of Grinding path given number of workpiece revolutions Formula

Fx Copy

LaTeX Copy

The Width of grinding path is defined as the width of material removed by the grinding wheel in a single pass over the workpiece. Check FAQs

a p = m \cdot Λ W \cdot \frac{S e}{2 \cdot v w}

a_p - The Width of Grinding Path?m - Number of Workpiece Revolution?Λ_W - Workpiece Removal Parameter per Unit Time?S_e - Effective Stiffness?v_w - Surface Speed of Workpiece in Grinding?

Width of Grinding path given number of workpiece revolutions Example

With values

With units

Only example

Here is how the Width of Grinding path given number of workpiece revolutions equation looks like with Values.

Here is how the Width of Grinding path given number of workpiece revolutions equation looks like with Units.

Here is how the Width of Grinding path given number of workpiece revolutions equation looks like.

1102.5 = 3 \cdot 2.45 \cdot \frac{0.03}{2 \cdot 100}

1102.5mm = 3 \cdot 2.45 \cdot \frac{0.03N/m}{2 \cdot 100mm/s}

1102.5 = 3 \cdot 2.45 \cdot \frac{0.03}{2 \cdot 100}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Width of Grinding path given number of workpiece revolutions

Width of Grinding path given number of workpiece revolutions Solution

Follow our step by step solution on how to calculate Width of Grinding path given number of workpiece revolutions?

FIRST Step Consider the formula

a p = m \cdot Λ W \cdot \frac{S e}{2 \cdot v w}

Next Step Substitute values of Variables

∴

a p = 3 \cdot 2.45 \cdot \frac{0.03N/m}{2 \cdot 100mm/s}

Next Step Convert Units

∴

a p = 3 \cdot 2.45 \cdot \frac{0.03N/m}{2 \cdot 0.1m/s}

Next Step Prepare to Evaluate

∴

a p = 3 \cdot 2.45 \cdot \frac{0.03}{2 \cdot 0.1}

Next Step Evaluate

∴

a p = 1.1025m

LAST Step Convert to Output's Unit

∴

a p = 1102.5mm

Width of Grinding path given number of workpiece revolutions Formula Elements

Variables

The Width of Grinding Path

The Width of grinding path is defined as the width of material removed by the grinding wheel in a single pass over the workpiece.

Symbol: a_p

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find The Width of Grinding Path

Number of Workpiece Revolution

Number of Workpiece Revolution is defined as the number of times the workpiece rotates completely about its axis during a machining operation.

Symbol: m

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Number of Workpiece Revolution

Workpiece Removal Parameter per Unit Time

Workpiece removal parameter per unit time is the ratio of the volume of workpiece removed per unit time per unit thrust force. The amount of material removed from the workpiece per unit time.

Symbol: Λ_W

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Workpiece Removal Parameter per Unit Time

Effective Stiffness

Effective stiffness is the total extent to which a workpiece resists deformation in response to an applied force.

Symbol: S_e

Measurement: Surface TensionUnit: N/m

Note: Value can be positive or negative.

Formulas to find Effective Stiffness

Surface Speed of Workpiece in Grinding

Surface Speed of Workpiece in Grinding is the speed at which the outer edge of the wheel moves relative to the workpiece being ground. It influences the material removal rate and surface finish.

Symbol: v_w

Measurement: SpeedUnit: mm/s

Note: Value should be greater than 0.

Formulas to find Surface Speed of Workpiece in Grinding

Other formulas in Workpiece category

Go Surface Speed of workpiece given Metal removal rate during grinding

v w = \frac{Z m}{f i \cdot a p}

Go Surface speed of workpiece given constant for grinding wheel

v w = ({a cMax}^{2}) \cdot \frac{V t}{K g \cdot \sqrt{f i}}

Go Diameter of workpiece given Metal removal rate

d wp = \frac{Z w}{V f \cdot π \cdot a p}

Go Diameter of workpiece given feed and machine infeed speed

d wp = Λ W \cdot d t \cdot \frac{(\frac{V if}{V f}) - 1}{Λ T}

How to Evaluate Width of Grinding path given number of workpiece revolutions?

Width of Grinding path given number of workpiece revolutions evaluator uses The Width of Grinding Path = Number of Workpiece Revolution*Workpiece Removal Parameter per Unit Time*Effective Stiffness/(2*Surface Speed of Workpiece in Grinding) to evaluate the The Width of Grinding Path, Width of Grinding path given number of workpiece revolutions" is calculates the width of the grinding path in a grinding cycle based on the number of workpiece revolutions, the workpiece removal parameter, the effective stiffness, and the workpiece surface speed. The Width of Grinding Path is denoted by a_p symbol.

How to evaluate Width of Grinding path given number of workpiece revolutions using this online evaluator? To use this online evaluator for Width of Grinding path given number of workpiece revolutions, enter Number of Workpiece Revolution (m), Workpiece Removal Parameter per Unit Time (Λ_W), Effective Stiffness (S_e) & Surface Speed of Workpiece in Grinding (v_w) and hit the calculate button.

FAQs on Width of Grinding path given number of workpiece revolutions

What is the formula to find Width of Grinding path given number of workpiece revolutions?

The formula of Width of Grinding path given number of workpiece revolutions is expressed as The Width of Grinding Path = Number of Workpiece Revolution*Workpiece Removal Parameter per Unit Time*Effective Stiffness/(2*Surface Speed of Workpiece in Grinding). Here is an example- 810000 = 3*2.45*0.03/(2*0.1).

How to calculate Width of Grinding path given number of workpiece revolutions?

With Number of Workpiece Revolution (m), Workpiece Removal Parameter per Unit Time (Λ_W), Effective Stiffness (S_e) & Surface Speed of Workpiece in Grinding (v_w) we can find Width of Grinding path given number of workpiece revolutions using the formula - The Width of Grinding Path = Number of Workpiece Revolution*Workpiece Removal Parameter per Unit Time*Effective Stiffness/(2*Surface Speed of Workpiece in Grinding).

Can the Width of Grinding path given number of workpiece revolutions be negative?

No, the Width of Grinding path given number of workpiece revolutions, measured in Length cannot be negative.

Which unit is used to measure Width of Grinding path given number of workpiece revolutions?

Width of Grinding path given number of workpiece revolutions is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Width of Grinding path given number of workpiece revolutions can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Width of Grinding path given number of workpiece revolutions Formula

Width of Grinding path given number of workpiece revolutions Example

Width of Grinding path given number of workpiece revolutions Solution

Width of Grinding path given number of workpiece revolutions Formula Elements

Other formulas in Workpiece category

How to Evaluate Width of Grinding path given number of workpiece revolutions?

FAQs on Width of Grinding path given number of workpiece revolutions

Variable Name