FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Width of Equilibrium Gap Formula

GoGap between Tool and Work Surface given Supply Current Formula

GoGap between Tool and Work Surface Formula

Fx Copy

LaTeX Copy

The Gap between Tool and Work Surface is the stretch of the distance between tool and work Surface during Electrochemical Machining. Check FAQs

h = \frac{R \cdot A g}{r e}

h - Gap Between Tool And Work Surface?R - Resistance of Gap Between Work And Tool?A_g - Cross Sectional Area of Gap?r_e - Specific Resistance of The Electrolyte?

Width of Equilibrium Gap Example

With values

With units

Only example

Here is how the Width of Equilibrium Gap equation looks like with Values.

Here is how the Width of Equilibrium Gap equation looks like with Units.

Here is how the Width of Equilibrium Gap equation looks like.

0.25 = \frac{0.012 \cdot 6.25}{3}

0.25mm = \frac{0.012Ω \cdot 6.25cm²}{3Ω*cm}

0.25 = \frac{0.012 \cdot 6.25}{3}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Width of Equilibrium Gap

Width of Equilibrium Gap Solution

Follow our step by step solution on how to calculate Width of Equilibrium Gap?

FIRST Step Consider the formula

h = \frac{R \cdot A g}{r e}

Next Step Substitute values of Variables

∴

h = \frac{0.012Ω \cdot 6.25cm²}{3Ω*cm}

Next Step Convert Units

∴

h = \frac{0.012Ω \cdot 0.0006m²}{0.03Ω*m}

Next Step Prepare to Evaluate

∴

h = \frac{0.012 \cdot 0.0006}{0.03}

Next Step Evaluate

∴

h = 0.00025m

LAST Step Convert to Output's Unit

∴

h = 0.25mm

Width of Equilibrium Gap Formula Elements

Variables

Gap Between Tool And Work Surface

The Gap between Tool and Work Surface is the stretch of the distance between tool and work Surface during Electrochemical Machining.

Symbol: h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Gap Between Tool And Work Surface

Resistance of Gap Between Work And Tool

Resistance of Gap Between Work And Tool, often referred to as the "gap" in machining processes, depends on various factors such as the material being machined, the tool material and geometry.

Symbol: R

Measurement: Electric ResistanceUnit: Ω

Note: Value should be greater than 0.

Formulas to find Resistance of Gap Between Work And Tool

Cross Sectional Area of Gap

The Cross Sectional Area of Gap is defined as the cross-sectional area of the equilibrium gap which is required to maintain the desired electrolytic effect between tool and workpiece.

Symbol: A_g

Measurement: AreaUnit: cm²

Note: Value should be greater than 0.

Formulas to find Cross Sectional Area of Gap

Specific Resistance of The Electrolyte

Specific Resistance of The Electrolyte is the measure of how strongly it opposes the flow of current through them.

Symbol: r_e

Measurement: Electric ResistivityUnit: Ω*cm

Note: Value should be greater than 0.

Formulas to find Specific Resistance of The Electrolyte

Other Formulas to find Gap Between Tool And Work Surface

Go Gap between Tool and Work Surface given Supply Current

h = A \cdot \frac{V s}{r e \cdot I}

Go Gap between Tool and Work Surface

h = η e \cdot V s \cdot \frac{e}{r e \cdot ρ \cdot V f}

Other formulas in Gap Resistance category

Go Specific Resistivity of Electrolyte given Supply Current

r e = A \cdot \frac{V s}{h \cdot I}

Go Density of Work Material given Gap between Tool and Work Surface

ρ = η e \cdot V s \cdot \frac{e}{r e \cdot V f \cdot h}

Go Specific Resistivity of Electrolyte given Gap between Tool and Work Surface

r e = η e \cdot V s \cdot \frac{e}{h \cdot ρ \cdot V f}

Go Gap Resistance between Work and Tool

R = \frac{r e \cdot h}{A g}

How to Evaluate Width of Equilibrium Gap?

Width of Equilibrium Gap evaluator uses Gap Between Tool And Work Surface = (Resistance of Gap Between Work And Tool*Cross Sectional Area of Gap)/Specific Resistance of The Electrolyte to evaluate the Gap Between Tool And Work Surface, The Width of equilibrium gap formula is defined as the gap required to maintain the electrochemical effect between tool and workpiece. Gap Between Tool And Work Surface is denoted by h symbol.

How to evaluate Width of Equilibrium Gap using this online evaluator? To use this online evaluator for Width of Equilibrium Gap, enter Resistance of Gap Between Work And Tool (R), Cross Sectional Area of Gap (A_g) & Specific Resistance of The Electrolyte (r_e) and hit the calculate button.

FAQs on Width of Equilibrium Gap

What is the formula to find Width of Equilibrium Gap?

The formula of Width of Equilibrium Gap is expressed as Gap Between Tool And Work Surface = (Resistance of Gap Between Work And Tool*Cross Sectional Area of Gap)/Specific Resistance of The Electrolyte. Here is an example- 250 = (0.012*0.000625)/0.03.

How to calculate Width of Equilibrium Gap?

With Resistance of Gap Between Work And Tool (R), Cross Sectional Area of Gap (A_g) & Specific Resistance of The Electrolyte (r_e) we can find Width of Equilibrium Gap using the formula - Gap Between Tool And Work Surface = (Resistance of Gap Between Work And Tool*Cross Sectional Area of Gap)/Specific Resistance of The Electrolyte.

What are the other ways to Calculate Gap Between Tool And Work Surface?

Here are the different ways to Calculate Gap Between Tool And Work Surface-

Gap Between Tool And Work Surface=Area of Penetration*Supply Voltage/(Specific Resistance of The Electrolyte*Electric Current)
Gap Between Tool And Work Surface=Current Efficiency in Decimal*Supply Voltage*Electrochemical Equivalent/(Specific Resistance of The Electrolyte*Work Piece Density*Feed Speed)

Can the Width of Equilibrium Gap be negative?

No, the Width of Equilibrium Gap, measured in Length cannot be negative.

Which unit is used to measure Width of Equilibrium Gap?

Width of Equilibrium Gap is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Width of Equilibrium Gap can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Width of Equilibrium Gap Formula

​GoGap between Tool and Work Surface given Supply Current Formula

​GoGap between Tool and Work Surface Formula

Width of Equilibrium Gap Example

Width of Equilibrium Gap Solution

Width of Equilibrium Gap Formula Elements

Other Formulas to find Gap Between Tool And Work Surface

Other formulas in Gap Resistance category

How to Evaluate Width of Equilibrium Gap?

FAQs on Width of Equilibrium Gap

Variable Name

GoGap between Tool and Work Surface given Supply Current Formula

GoGap between Tool and Work Surface Formula