FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Wheel removal parameter given feed and machine infeed speed Formula

GoWheel removal parameter given wheel removal rate Formula

GoWheel removal parameter given Grinding ratio Formula

Fx Copy

LaTeX Copy

The wheel removal parameter refers to the rate of removal of abrasive grains from grinding wheel with thrust force induced between workpiece and wheel. Check FAQs

Λ t = Λ w \cdot d t \cdot \frac{\frac{V i}{V f} - 1}{d w}

Λ_t - Wheel Removal Parameter?Λ_w - Workpiece Removal Parameter?d_t - Diameter of Grinding Tool Wheel?V_i - Machine Infeed Speed?V_f - Feed Speed?d_w - Diameter of Workpiece?

Wheel removal parameter given feed and machine infeed speed Example

With values

With units

Only example

Here is how the Wheel removal parameter given feed and machine infeed speed equation looks like with Values.

Here is how the Wheel removal parameter given feed and machine infeed speed equation looks like with Units.

Here is how the Wheel removal parameter given feed and machine infeed speed equation looks like.

2.4 = 10 \cdot 500 \cdot \frac{\frac{225.828}{203.6043} - 1}{227.4}

2.4 = 10 \cdot 500mm \cdot \frac{\frac{225.828mm/s}{203.6043mm/s} - 1}{227.4mm}

2.4 = 10 \cdot 500 \cdot \frac{\frac{225.828}{203.6043} - 1}{227.4}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Wheel removal parameter given feed and machine infeed speed

Wheel removal parameter given feed and machine infeed speed Solution

Follow our step by step solution on how to calculate Wheel removal parameter given feed and machine infeed speed?

FIRST Step Consider the formula

Λ t = Λ w \cdot d t \cdot \frac{\frac{V i}{V f} - 1}{d w}

Next Step Substitute values of Variables

∴

Λ t = 10 \cdot 500mm \cdot \frac{\frac{225.828mm/s}{203.6043mm/s} - 1}{227.4mm}

Next Step Convert Units

∴

Λ t = 10 \cdot 0.5m \cdot \frac{\frac{0.2258m/s}{0.2036m/s} - 1}{0.2274m}

Next Step Prepare to Evaluate

∴

Λ t = 10 \cdot 0.5 \cdot \frac{\frac{0.2258}{0.2036} - 1}{0.2274}

Next Step Evaluate

∴

Λ t = 2.39998741311425

LAST Step Rounding Answer

∴

Λ t = 2.4

Wheel removal parameter given feed and machine infeed speed Formula Elements

Variables

Wheel Removal Parameter

The wheel removal parameter refers to the rate of removal of abrasive grains from grinding wheel with thrust force induced between workpiece and wheel.

Symbol: Λ_t

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Wheel Removal Parameter

Workpiece Removal Parameter

Workpiece removal parameter refers to the rate of removal of material from workpiece with thrust force induced between workpiece and wheel.

Symbol: Λ_w

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Workpiece Removal Parameter

Diameter of Grinding Tool Wheel

The Diameter of Grinding Tool Wheel is the distance across the widest part of grinding wheel, measured straight through the center of grinding wheel.

Symbol: d_t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Grinding Tool Wheel

Machine Infeed Speed

Machine Infeed speed refers to the controlled movement of the grinding wheel with respect to time towards the workpiece to achieve a desired depth of cut or removal of material.

Symbol: V_i

Measurement: SpeedUnit: mm/s

Note: Value should be greater than 0.

Formulas to find Machine Infeed Speed

Feed Speed

Feed Speed is the distance a cutting tool travels during one spindle revolution. It determines the rate at which the cutting tool advances against the workpiece during the machining process.

Symbol: V_f

Measurement: SpeedUnit: mm/s

Note: Value should be greater than 0.

Formulas to find Feed Speed

Diameter of Workpiece

The Diameter of Workpiece is the initial diameter of the workpiece before machining is done. This would be the diameter of the raw material stock that gets fed into the machine for processing.

Symbol: d_w

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Workpiece

Other Formulas to find Wheel Removal Parameter

Go Wheel removal parameter given wheel removal rate

Λ t = \frac{Z t}{F t - F t0}

Go Wheel removal parameter given Grinding ratio

Λ t = \frac{Λ w}{G r}

Other formulas in Removal Parameters category

Go Metal removal rate given workpiece removal parameter

Z g = (F t - F t0) \cdot Λ w

Go Thrust force given workpiece removal parameter

F t = \frac{Z g}{Λ w} + F t0

Go Threshold thrust force given workpiece removal parameter

F t0 = F t - \frac{Z g}{Λ w}

Go Workpiece removal parameter given metal removal rate

Λ w = \frac{Z g}{F t - F t0}

How to Evaluate Wheel removal parameter given feed and machine infeed speed?

Wheel removal parameter given feed and machine infeed speed evaluator uses Wheel Removal Parameter = Workpiece Removal Parameter*Diameter of Grinding Tool Wheel*(Machine Infeed Speed/Feed Speed-1)/Diameter of Workpiece to evaluate the Wheel Removal Parameter, Wheel removal parameter given feed and machine infeed speed is a value established by Hahn and Lindsay in grinding analysis. It's determined experimentally and depends on factors like the grinding wheel material. This parameter essentially elucidates the relationship between the rate at which abrasive material is removed from the wheel and the thrust force applied between the workpiece and the grinding wheel. It's a crucial aspect of understanding and optimizing the grinding process for efficiency and quality. Wheel Removal Parameter is denoted by Λ_t symbol.

How to evaluate Wheel removal parameter given feed and machine infeed speed using this online evaluator? To use this online evaluator for Wheel removal parameter given feed and machine infeed speed, enter Workpiece Removal Parameter (Λ_w), Diameter of Grinding Tool Wheel (d_t), Machine Infeed Speed (V_i), Feed Speed (V_f) & Diameter of Workpiece (d_w) and hit the calculate button.

FAQs on Wheel removal parameter given feed and machine infeed speed

What is the formula to find Wheel removal parameter given feed and machine infeed speed?

The formula of Wheel removal parameter given feed and machine infeed speed is expressed as Wheel Removal Parameter = Workpiece Removal Parameter*Diameter of Grinding Tool Wheel*(Machine Infeed Speed/Feed Speed-1)/Diameter of Workpiece. Here is an example- 2.399987 = 10*0.5*(0.225828/0.2036043-1)/0.2274.

How to calculate Wheel removal parameter given feed and machine infeed speed?

With Workpiece Removal Parameter (Λ_w), Diameter of Grinding Tool Wheel (d_t), Machine Infeed Speed (V_i), Feed Speed (V_f) & Diameter of Workpiece (d_w) we can find Wheel removal parameter given feed and machine infeed speed using the formula - Wheel Removal Parameter = Workpiece Removal Parameter*Diameter of Grinding Tool Wheel*(Machine Infeed Speed/Feed Speed-1)/Diameter of Workpiece.

What are the other ways to Calculate Wheel Removal Parameter?

Here are the different ways to Calculate Wheel Removal Parameter-

Wheel Removal Parameter=Wheel Removal Rate/(Thrust Force-Threshold Thrust Force)
Wheel Removal Parameter=Workpiece Removal Parameter/Grinding Ratio

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Wheel removal parameter given feed and machine infeed speed Formula

​GoWheel removal parameter given wheel removal rate Formula

​GoWheel removal parameter given Grinding ratio Formula

Wheel removal parameter given feed and machine infeed speed Example

Wheel removal parameter given feed and machine infeed speed Solution

Wheel removal parameter given feed and machine infeed speed Formula Elements

Other Formulas to find Wheel Removal Parameter

Other formulas in Removal Parameters category

How to Evaluate Wheel removal parameter given feed and machine infeed speed?

FAQs on Wheel removal parameter given feed and machine infeed speed

Variable Name

GoWheel removal parameter given wheel removal rate Formula

GoWheel removal parameter given Grinding ratio Formula