FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Well Loss given Specific Capacity Formula

GoWell Loss given Drawdown Formula

Fx Copy

LaTeX Copy

The Head Loss in Well refers to the difference between the head of the aquifer immediately outside and in the well a head inside because of all these losses. Check FAQs

CQ n = (\frac{Q}{S c}) - BQ

CQⁿ - Head Loss in Well?Q - Discharge?S_c - Specific Capacity?BQ - Aquifer Loss?

Well Loss given Specific Capacity Example

With values

With units

Only example

Here is how the Well Loss given Specific Capacity equation looks like with Values.

Here is how the Well Loss given Specific Capacity equation looks like with Units.

Here is how the Well Loss given Specific Capacity equation looks like.

-0.3027 = (\frac{1.01}{0.037}) - 27.6

-0.3027m = (\frac{1.01m³/s}{0.037m²/s}) - 27.6m

-0.3027 = (\frac{1.01}{0.037}) - 27.6

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Well Loss given Specific Capacity

Well Loss given Specific Capacity Solution

Follow our step by step solution on how to calculate Well Loss given Specific Capacity?

FIRST Step Consider the formula

CQ n = (\frac{Q}{S c}) - BQ

Next Step Substitute values of Variables

∴

CQ n = (\frac{1.01m³/s}{0.037m²/s}) - 27.6m

Next Step Prepare to Evaluate

∴

CQ n = (\frac{1.01}{0.037}) - 27.6

Next Step Evaluate

∴

CQ n = -0.302702702702703m

LAST Step Rounding Answer

∴

CQ n = -0.3027m

Well Loss given Specific Capacity Formula Elements

Variables

Head Loss in Well

The Head Loss in Well refers to the difference between the head of the aquifer immediately outside and in the well a head inside because of all these losses.

Symbol: CQⁿ

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Head Loss in Well

Discharge

Discharge is the rate of flow of a liquid.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Discharge

Specific Capacity

The Specific Capacity refers to the measure used in hydrogeology to evaluate the efficiency of a well, defined as the amount of water a well can produce per unit of drawdown.

Symbol: S_c

Measurement: Kinematic ViscosityUnit: m²/s

Note: Value should be greater than 0.

Formulas to find Specific Capacity

Aquifer Loss

The Aquifer Loss refers to the reduction in the volume of water stored in an aquifer.

Symbol: BQ

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Aquifer Loss

Other Formulas to find Head Loss in Well

Go Well Loss given Drawdown

CQ n = s t - BQ

How to Evaluate Well Loss given Specific Capacity?

Well Loss given Specific Capacity evaluator uses Head Loss in Well = (Discharge/Specific Capacity)-Aquifer Loss to evaluate the Head Loss in Well, The Well Loss given Specific Capacity formula is defined as a measure of the reduction in well yield due to the resistance to flow within the well, which depends on the specific capacity of the well and the flow rate, providing valuable information for well design and management. Head Loss in Well is denoted by CQⁿ symbol.

How to evaluate Well Loss given Specific Capacity using this online evaluator? To use this online evaluator for Well Loss given Specific Capacity, enter Discharge (Q), Specific Capacity (S_c) & Aquifer Loss (BQ) and hit the calculate button.

FAQs on Well Loss given Specific Capacity

What is the formula to find Well Loss given Specific Capacity?

The formula of Well Loss given Specific Capacity is expressed as Head Loss in Well = (Discharge/Specific Capacity)-Aquifer Loss. Here is an example- 0.167297 = (1.01/0.037)-27.6.

How to calculate Well Loss given Specific Capacity?

With Discharge (Q), Specific Capacity (S_c) & Aquifer Loss (BQ) we can find Well Loss given Specific Capacity using the formula - Head Loss in Well = (Discharge/Specific Capacity)-Aquifer Loss.

What are the other ways to Calculate Head Loss in Well?

Here are the different ways to Calculate Head Loss in Well-

Head Loss in Well=Total Drawdown-Aquifer Loss

Can the Well Loss given Specific Capacity be negative?

Yes, the Well Loss given Specific Capacity, measured in Length can be negative.

Which unit is used to measure Well Loss given Specific Capacity?

Well Loss given Specific Capacity is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Well Loss given Specific Capacity can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit