FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Water Table Profile Neglecting Depths of Water in Drains Formula

Fx Copy

LaTeX Copy

The Water Table Profile refers to the depth of water table below aquifer. Check FAQs

h = \sqrt{(\frac{R}{K}) \cdot (L - x) \cdot x}

h - Water Table Profile?R - Natural Recharge?K - Coefficient of Permeability?L - Length between Tile Drain?x - Flow in 'x' Direction?

Water Table Profile Neglecting Depths of Water in Drains Example

With values

With units

Only example

Here is how the Water Table Profile Neglecting Depths of Water in Drains equation looks like with Values.

Here is how the Water Table Profile Neglecting Depths of Water in Drains equation looks like with Units.

Here is how the Water Table Profile Neglecting Depths of Water in Drains equation looks like.

3.7712 = \sqrt{(\frac{16}{9}) \cdot (6 - 2) \cdot 2}

3.7712m = \sqrt{(\frac{16m³/s}{9cm/s}) \cdot (6m - 2m³/s) \cdot 2m³/s}

3.7712 = \sqrt{(\frac{16}{9}) \cdot (6 - 2) \cdot 2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Water Table Profile Neglecting Depths of Water in Drains

Water Table Profile Neglecting Depths of Water in Drains Solution

Follow our step by step solution on how to calculate Water Table Profile Neglecting Depths of Water in Drains?

FIRST Step Consider the formula

h = \sqrt{(\frac{R}{K}) \cdot (L - x) \cdot x}

Next Step Substitute values of Variables

∴

h = \sqrt{(\frac{16m³/s}{9cm/s}) \cdot (6m - 2m³/s) \cdot 2m³/s}

Next Step Prepare to Evaluate

∴

h = \sqrt{(\frac{16}{9}) \cdot (6 - 2) \cdot 2}

Next Step Evaluate

∴

h = 3.77123616632825m

LAST Step Rounding Answer

∴

h = 3.7712m

Water Table Profile Neglecting Depths of Water in Drains Formula Elements

Variables

Functions

Water Table Profile

The Water Table Profile refers to the depth of water table below aquifer.

Symbol: h

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Water Table Profile

Natural Recharge

The Natural Recharge is a process by which groundwater is replenished naturally when precipitation infiltrates the ground, moving through the soil and rock layers until it reaches the water table.

Symbol: R

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Natural Recharge

Coefficient of Permeability

The Coefficient of Permeability of soil describes how easily a liquid will move through the soil.

Symbol: K

Measurement: SpeedUnit: cm/s

Note: Value should be greater than 0.

Formulas to find Coefficient of Permeability

Length between Tile Drain

The Length between Tile Drain refers to the approximate expression to the water table profile on a horizontal impervious boundary.

Symbol: L

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Length between Tile Drain

Flow in 'x' Direction

The Flow in 'x' Direction refers to the one-dimensional Dupit flow with recharge representation.

Symbol: x

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Flow in 'x' Direction

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Unconfined Flow by Dupit's Assumption category

Go Mass Flux Entering Element

M x1 = ρ water \cdot V x \cdot H w \cdot Δy

Go Discharge per Unit Width of Aquifer considering Permeability

Q = \frac{({h o}^{2} - {h 1}^{2}) \cdot K}{2 \cdot L stream}

Go Maximum Height of Water Table

h m = (\frac{L}{2}) \cdot \sqrt{\frac{R}{K}}

Go Length when Discharge entering per Unit Length of Drain is Considered

L = \frac{Q}{R}

How to Evaluate Water Table Profile Neglecting Depths of Water in Drains?

Water Table Profile Neglecting Depths of Water in Drains evaluator uses Water Table Profile = sqrt((Natural Recharge/Coefficient of Permeability)*(Length between Tile Drain-Flow in 'x' Direction)*Flow in 'x' Direction) to evaluate the Water Table Profile, The Water Table Profile Neglecting Depths of Water in Drains formula is defined as the upper surface of the zone of saturation, where the pores and fractures of the ground are saturated with water. Water Table Profile is denoted by h symbol.

How to evaluate Water Table Profile Neglecting Depths of Water in Drains using this online evaluator? To use this online evaluator for Water Table Profile Neglecting Depths of Water in Drains, enter Natural Recharge (R), Coefficient of Permeability (K), Length between Tile Drain (L) & Flow in 'x' Direction (x) and hit the calculate button.

FAQs on Water Table Profile Neglecting Depths of Water in Drains

What is the formula to find Water Table Profile Neglecting Depths of Water in Drains?

The formula of Water Table Profile Neglecting Depths of Water in Drains is expressed as Water Table Profile = sqrt((Natural Recharge/Coefficient of Permeability)*(Length between Tile Drain-Flow in 'x' Direction)*Flow in 'x' Direction). Here is an example- 3.771236 = sqrt((16/0.09)*(6-2)*2).

How to calculate Water Table Profile Neglecting Depths of Water in Drains?

With Natural Recharge (R), Coefficient of Permeability (K), Length between Tile Drain (L) & Flow in 'x' Direction (x) we can find Water Table Profile Neglecting Depths of Water in Drains using the formula - Water Table Profile = sqrt((Natural Recharge/Coefficient of Permeability)*(Length between Tile Drain-Flow in 'x' Direction)*Flow in 'x' Direction). This formula also uses Square Root (sqrt) function(s).

Can the Water Table Profile Neglecting Depths of Water in Drains be negative?

No, the Water Table Profile Neglecting Depths of Water in Drains, measured in Length cannot be negative.

Which unit is used to measure Water Table Profile Neglecting Depths of Water in Drains?

Water Table Profile Neglecting Depths of Water in Drains is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Water Table Profile Neglecting Depths of Water in Drains can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Water Table Profile Neglecting Depths of Water in Drains Formula

Water Table Profile Neglecting Depths of Water in Drains Example

Water Table Profile Neglecting Depths of Water in Drains Solution

Water Table Profile Neglecting Depths of Water in Drains Formula Elements

Other formulas in Unconfined Flow by Dupit's Assumption category

How to Evaluate Water Table Profile Neglecting Depths of Water in Drains?

FAQs on Water Table Profile Neglecting Depths of Water in Drains

Variable Name