FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Water Depth given Flow Velocity in Continuous Discharge Measurements Formula

Fx Copy

LaTeX Copy

Water Depth as Indicated by the Scale is the depth as measured from the water level to the bottom of the considered water body. Check FAQs

d = {(\frac{v}{0.00198})}^{\frac{1}{1.3597}} + 17.7

d - Water Depth as Indicated by the Scale?v - Stream Velocity?

Water Depth given Flow Velocity in Continuous Discharge Measurements Example

With values

With units

Only example

Here is how the Water Depth given Flow Velocity in Continuous Discharge Measurements equation looks like with Values.

Here is how the Water Depth given Flow Velocity in Continuous Discharge Measurements equation looks like with Units.

Here is how the Water Depth given Flow Velocity in Continuous Discharge Measurements equation looks like.

193.0549 = {(\frac{2.227}{0.00198})}^{\frac{1}{1.3597}} + 17.7

193.0549m = {(\frac{2.227m/s}{0.00198})}^{\frac{1}{1.3597}} + 17.7

193.0549 = {(\frac{2.227}{0.00198})}^{\frac{1}{1.3597}} + 17.7

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Water Depth given Flow Velocity in Continuous Discharge Measurements

Water Depth given Flow Velocity in Continuous Discharge Measurements Solution

Follow our step by step solution on how to calculate Water Depth given Flow Velocity in Continuous Discharge Measurements?

FIRST Step Consider the formula

d = {(\frac{v}{0.00198})}^{\frac{1}{1.3597}} + 17.7

Next Step Substitute values of Variables

∴

d = {(\frac{2.227m/s}{0.00198})}^{\frac{1}{1.3597}} + 17.7

Next Step Prepare to Evaluate

∴

d = {(\frac{2.227}{0.00198})}^{\frac{1}{1.3597}} + 17.7

Next Step Evaluate

∴

d = 193.054855443427m

LAST Step Rounding Answer

∴

d = 193.0549m

Water Depth given Flow Velocity in Continuous Discharge Measurements Formula Elements

Variables

Water Depth as Indicated by the Scale

Water Depth as Indicated by the Scale is the depth as measured from the water level to the bottom of the considered water body.

Symbol: d

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Water Depth as Indicated by the Scale

Stream Velocity

Stream Velocity is the speed of the water in the stream. It is greatest in midstream near the surface and is slowest along the stream bed and banks due to friction.

Symbol: v

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Stream Velocity

How to Evaluate Water Depth given Flow Velocity in Continuous Discharge Measurements?

Water Depth given Flow Velocity in Continuous Discharge Measurements evaluator uses Water Depth as Indicated by the Scale = (Stream Velocity/0.00198)^(1/1.3597)+17.7 to evaluate the Water Depth as Indicated by the Scale, The Water Depth given Flow Velocity in Continuous Discharge Measurements formula is defined as the measure by soundings usually acquired by hydrographic surveys, measured from the water level to the bottom surface. Water Depth as Indicated by the Scale is denoted by d symbol.

How to evaluate Water Depth given Flow Velocity in Continuous Discharge Measurements using this online evaluator? To use this online evaluator for Water Depth given Flow Velocity in Continuous Discharge Measurements, enter Stream Velocity (v) and hit the calculate button.

FAQs on Water Depth given Flow Velocity in Continuous Discharge Measurements

What is the formula to find Water Depth given Flow Velocity in Continuous Discharge Measurements?

The formula of Water Depth given Flow Velocity in Continuous Discharge Measurements is expressed as Water Depth as Indicated by the Scale = (Stream Velocity/0.00198)^(1/1.3597)+17.7. Here is an example- 1.955387 = (2.227/0.00198)^(1/1.3597)+17.7.

How to calculate Water Depth given Flow Velocity in Continuous Discharge Measurements?

With Stream Velocity (v) we can find Water Depth given Flow Velocity in Continuous Discharge Measurements using the formula - Water Depth as Indicated by the Scale = (Stream Velocity/0.00198)^(1/1.3597)+17.7.

Can the Water Depth given Flow Velocity in Continuous Discharge Measurements be negative?

No, the Water Depth given Flow Velocity in Continuous Discharge Measurements, measured in Length cannot be negative.

Which unit is used to measure Water Depth given Flow Velocity in Continuous Discharge Measurements?

Water Depth given Flow Velocity in Continuous Discharge Measurements is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Water Depth given Flow Velocity in Continuous Discharge Measurements can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!