FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Formula

GoWasting Rate from Return Line Formula

Fx Copy

LaTeX Copy

Mean Cell Residence Time is the average time that the sludge remains in the reactor. Check FAQs

θ c = \frac{V \cdot X}{Q w' \cdot X r}

θ_c - Mean Cell Residence Time?V - Reactor Volume?X - MLSS?Q_w' - WAS Pumping Rate from Return Line?X_r - Sludge Concentration in Return Line?

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Example

With values

With units

Only example

Here is how the Wasting Rate from Return Line when Concentration of Solid in Effluent is Low equation looks like with Values.

Here is how the Wasting Rate from Return Line when Concentration of Solid in Effluent is Low equation looks like with Units.

Here is how the Wasting Rate from Return Line when Concentration of Solid in Effluent is Low equation looks like.

15 = \frac{1000 \cdot 1200}{400 \cdot 200}

15d = \frac{1000m³ \cdot 1200mg/L}{400m³/d \cdot 200mg/L}

15 = \frac{1000 \cdot 1200}{400 \cdot 200}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Wasting Rate from Return Line when Concentration of Solid in Effluent is Low

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Solution

Follow our step by step solution on how to calculate Wasting Rate from Return Line when Concentration of Solid in Effluent is Low?

FIRST Step Consider the formula

θ c = \frac{V \cdot X}{Q w' \cdot X r}

Next Step Substitute values of Variables

∴

θ c = \frac{1000m³ \cdot 1200mg/L}{400m³/d \cdot 200mg/L}

Next Step Convert Units

∴

θ c = \frac{1000m³ \cdot 1.2kg/m³}{0.0046m³/s \cdot 0.2kg/m³}

Next Step Prepare to Evaluate

∴

θ c = \frac{1000 \cdot 1.2}{0.0046 \cdot 0.2}

Next Step Evaluate

∴

θ c = 1296000s

LAST Step Convert to Output's Unit

∴

θ c = 15d

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Formula Elements

Variables

Mean Cell Residence Time

Mean Cell Residence Time is the average time that the sludge remains in the reactor.

Symbol: θ_c

Measurement: TimeUnit: d

Note: Value should be between 5 to 15.

Formulas to find Mean Cell Residence Time

Reactor Volume

Reactor Volume refers to the physical volume of a reactor used in chemical processes.

Symbol: V

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Reactor Volume

MLSS

MLSS is the sum of volatile suspended solids (organics) and fixed suspended solids (inorganics).

Symbol: X

Measurement: DensityUnit: mg/L

Note: Value should be between 1000 to 6500.

Formulas to find MLSS

WAS Pumping Rate from Return Line

WAS Pumping Rate from Return Line is the flow rate of waste sludge from the return line.

Symbol: Q_w'

Measurement: Volumetric Flow RateUnit: m³/d

Note: Value should be greater than 0.

Formulas to find WAS Pumping Rate from Return Line

Sludge Concentration in Return Line

Sludge Concentration in Return Line refers to the concentration of suspended solids in the sludge that is being pumped back from the secondary clarifier to the aeration tank.

Symbol: X_r

Measurement: DensityUnit: mg/L

Note: Value should be greater than 0.

Formulas to find Sludge Concentration in Return Line

Other Formulas to find Mean Cell Residence Time

Go Wasting Rate from Return Line

θ c = \frac{V \cdot X}{(Q w' \cdot X r) + (Q e \cdot X e)}

How to Evaluate Wasting Rate from Return Line when Concentration of Solid in Effluent is Low?

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low evaluator uses Mean Cell Residence Time = (Reactor Volume*MLSS)/(WAS Pumping Rate from Return Line*Sludge Concentration in Return Line) to evaluate the Mean Cell Residence Time, The Wasting Rate from Return Line when Concentration of Solid in Effluent is Low formula is defined as the rate at which biomass (microorganisms) is removed from a bioreactor to maintain a desired level of biomass concentration. This process is crucial for the efficient functioning of the treatment plant. Mean Cell Residence Time is denoted by θ_c symbol.

How to evaluate Wasting Rate from Return Line when Concentration of Solid in Effluent is Low using this online evaluator? To use this online evaluator for Wasting Rate from Return Line when Concentration of Solid in Effluent is Low, enter Reactor Volume (V), MLSS (X), WAS Pumping Rate from Return Line (Q_w') & Sludge Concentration in Return Line (X_r) and hit the calculate button.

FAQs on Wasting Rate from Return Line when Concentration of Solid in Effluent is Low

What is the formula to find Wasting Rate from Return Line when Concentration of Solid in Effluent is Low?

The formula of Wasting Rate from Return Line when Concentration of Solid in Effluent is Low is expressed as Mean Cell Residence Time = (Reactor Volume*MLSS)/(WAS Pumping Rate from Return Line*Sludge Concentration in Return Line). Here is an example- 0.000174 = (1000*1.2)/(0.00462962962962963*0.2).

How to calculate Wasting Rate from Return Line when Concentration of Solid in Effluent is Low?

With Reactor Volume (V), MLSS (X), WAS Pumping Rate from Return Line (Q_w') & Sludge Concentration in Return Line (X_r) we can find Wasting Rate from Return Line when Concentration of Solid in Effluent is Low using the formula - Mean Cell Residence Time = (Reactor Volume*MLSS)/(WAS Pumping Rate from Return Line*Sludge Concentration in Return Line).

What are the other ways to Calculate Mean Cell Residence Time?

Here are the different ways to Calculate Mean Cell Residence Time-

Mean Cell Residence Time=(Reactor Volume*MLSS)/((WAS Pumping Rate from Return Line*Sludge Concentration in Return Line)+(Effluent Flow Rate*Solid Concentration in Effluent))

Can the Wasting Rate from Return Line when Concentration of Solid in Effluent is Low be negative?

No, the Wasting Rate from Return Line when Concentration of Solid in Effluent is Low, measured in Time cannot be negative.

Which unit is used to measure Wasting Rate from Return Line when Concentration of Solid in Effluent is Low?

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low is usually measured using the Day[d] for Time. Second[d], Millisecond[d], Microsecond[d] are the few other units in which Wasting Rate from Return Line when Concentration of Solid in Effluent is Low can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Formula

​GoWasting Rate from Return Line Formula

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Example

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Solution

Wasting Rate from Return Line when Concentration of Solid in Effluent is Low Formula Elements

Other Formulas to find Mean Cell Residence Time

How to Evaluate Wasting Rate from Return Line when Concentration of Solid in Effluent is Low?

FAQs on Wasting Rate from Return Line when Concentration of Solid in Effluent is Low

Variable Name

GoWasting Rate from Return Line Formula