FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Volume of Sediment Deposition given Incremental Area Formula

GoVolume of Sediment Deposited between two Consecutive Heights by Average End Area Method Formula

GoVolume of Sediment Deposited between two Consecutive Heights by Weighted Area Method Formula

Fx Copy

LaTeX Copy

Volume of Sediment Deposit is the deposited sediment volume between two consecutive heights h1 and h2 above the new datum. Check FAQs

ΔV s = 0.5 \cdot ((A 1 + A 2) \cdot ΔH)

ΔV_s - Volume of Sediment Deposit?A₁ - Cross-Sectional Area at Point 1?A₂ - Cross-Sectional Area at Point 2?ΔH - Change in Head Between the Points?

Volume of Sediment Deposition given Incremental Area Example

With values

With units

Only example

Here is how the Volume of Sediment Deposition given Incremental Area equation looks like with Values.

Here is how the Volume of Sediment Deposition given Incremental Area equation looks like with Units.

Here is how the Volume of Sediment Deposition given Incremental Area equation looks like.

5 = 0.5 \cdot ((14 + 6) \cdot 0.5)

5m³ = 0.5 \cdot ((14m² + 6m²) \cdot 0.5m)

5 = 0.5 \cdot ((14 + 6) \cdot 0.5)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Engineering Hydrology » fx Volume of Sediment Deposition given Incremental Area

Volume of Sediment Deposition given Incremental Area Solution

Follow our step by step solution on how to calculate Volume of Sediment Deposition given Incremental Area?

FIRST Step Consider the formula

ΔV s = 0.5 \cdot ((A 1 + A 2) \cdot ΔH)

Next Step Substitute values of Variables

∴

ΔV s = 0.5 \cdot ((14m² + 6m²) \cdot 0.5m)

Next Step Prepare to Evaluate

∴

ΔV s = 0.5 \cdot ((14 + 6) \cdot 0.5)

LAST Step Evaluate

∴

ΔV s = 5m³

Volume of Sediment Deposition given Incremental Area Formula Elements

Variables

Volume of Sediment Deposit

Volume of Sediment Deposit is the deposited sediment volume between two consecutive heights h1 and h2 above the new datum.

Symbol: ΔV_s

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Volume of Sediment Deposit

Cross-Sectional Area at Point 1

Cross-Sectional Area at Point 1 is defined as the area of the section at point 1.

Symbol: A₁

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Cross-Sectional Area at Point 1

Cross-Sectional Area at Point 2

Cross-Sectional Area at Point 2 is the area of cross section at a point 2.

Symbol: A₂

Measurement: AreaUnit: m²

Note: Value can be positive or negative.

Formulas to find Cross-Sectional Area at Point 2

Change in Head Between the Points

Change in Head Between the Points refers to the difference in the hydraulic head at two different points in a fluid system separated by a small distance dl.

Symbol: ΔH

Measurement: LengthUnit: m

Note: Value can be positive or negative.

Formulas to find Change in Head Between the Points

Other Formulas to find Volume of Sediment Deposit

Go Volume of Sediment Deposited between two Consecutive Heights by Average End Area Method

ΔV s = (A 1 + A 2) \cdot (\frac{ΔH}{2})

Go Volume of Sediment Deposited between two Consecutive Heights by Weighted Area Method

ΔV s = (A 1 + A 2 + \sqrt{A 1 \cdot A 2}) \cdot (\frac{ΔH}{3})

Other formulas in Empirical Area Reduction Method category

Go Relative Area for Different Type Classification of Reservoir

A p = C \cdot (p^{m 1}) \cdot {(1 - p)}^{n 1}

Go Difference in Elevations of Full Reservoir Level and Original Bed of Reservoir

H = \frac{h o}{p}

Go Relative Depth at New Zero Elevation

p = \frac{h o}{H}

Go New Total Depth of Reservoir

D = H - h o

How to Evaluate Volume of Sediment Deposition given Incremental Area?

Volume of Sediment Deposition given Incremental Area evaluator uses Volume of Sediment Deposit = 0.5*((Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*Change in Head Between the Points) to evaluate the Volume of Sediment Deposit, The Volume of Sediment Deposition given Incremental Area formula is defined as the accumulated volume of sediment between two area elements separated by differences in heights above the datum. Volume of Sediment Deposit is denoted by ΔV_s symbol.

How to evaluate Volume of Sediment Deposition given Incremental Area using this online evaluator? To use this online evaluator for Volume of Sediment Deposition given Incremental Area, enter Cross-Sectional Area at Point 1 (A₁), Cross-Sectional Area at Point 2 (A₂) & Change in Head Between the Points (ΔH) and hit the calculate button.

FAQs on Volume of Sediment Deposition given Incremental Area

What is the formula to find Volume of Sediment Deposition given Incremental Area?

The formula of Volume of Sediment Deposition given Incremental Area is expressed as Volume of Sediment Deposit = 0.5*((Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*Change in Head Between the Points). Here is an example- 5 = 0.5*((14+6)*0.5).

How to calculate Volume of Sediment Deposition given Incremental Area?

With Cross-Sectional Area at Point 1 (A₁), Cross-Sectional Area at Point 2 (A₂) & Change in Head Between the Points (ΔH) we can find Volume of Sediment Deposition given Incremental Area using the formula - Volume of Sediment Deposit = 0.5*((Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*Change in Head Between the Points).

What are the other ways to Calculate Volume of Sediment Deposit?

Here are the different ways to Calculate Volume of Sediment Deposit-

Volume of Sediment Deposit=(Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2)*(Change in Head Between the Points/2)
Volume of Sediment Deposit=(Cross-Sectional Area at Point 1+Cross-Sectional Area at Point 2+sqrt(Cross-Sectional Area at Point 1*Cross-Sectional Area at Point 2))*(Change in Head Between the Points/3)

Can the Volume of Sediment Deposition given Incremental Area be negative?

No, the Volume of Sediment Deposition given Incremental Area, measured in Volume cannot be negative.

Which unit is used to measure Volume of Sediment Deposition given Incremental Area?

Volume of Sediment Deposition given Incremental Area is usually measured using the Cubic Meter[m³] for Volume. Cubic Centimeter[m³], Cubic Millimeter[m³], Liter[m³] are the few other units in which Volume of Sediment Deposition given Incremental Area can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Volume of Sediment Deposition given Incremental Area Formula

​GoVolume of Sediment Deposited between two Consecutive Heights by Average End Area Method Formula

​GoVolume of Sediment Deposited between two Consecutive Heights by Weighted Area Method Formula

Volume of Sediment Deposition given Incremental Area Example

Volume of Sediment Deposition given Incremental Area Solution

Volume of Sediment Deposition given Incremental Area Formula Elements

Other Formulas to find Volume of Sediment Deposit

Other formulas in Empirical Area Reduction Method category

How to Evaluate Volume of Sediment Deposition given Incremental Area?

FAQs on Volume of Sediment Deposition given Incremental Area

Variable Name

GoVolume of Sediment Deposited between two Consecutive Heights by Average End Area Method Formula

GoVolume of Sediment Deposited between two Consecutive Heights by Weighted Area Method Formula