FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Viscosity Correction Factor for Shell and Tube Heat Exchanger Formula

Fx Copy

LaTeX Copy

Viscosity Correction Factor is ratio of fluid viscosity at mean temperature to fluid viscosity at the wall temperature. Check FAQs

μ Correction = {(\frac{μ fluid}{μ Wall})}^{0.14}

μ_Correction - Viscosity Correction Factor?μ_fluid - Fluid Viscosity at Bulk Temperature?μ_Wall - Fluid Viscosity at Wall Temperature?

Viscosity Correction Factor for Shell and Tube Heat Exchanger Example

With values

With units

Only example

Here is how the Viscosity Correction Factor for Shell and Tube Heat Exchanger equation looks like with Values.

Here is how the Viscosity Correction Factor for Shell and Tube Heat Exchanger equation looks like with Units.

Here is how the Viscosity Correction Factor for Shell and Tube Heat Exchanger equation looks like.

0.9999 = {(\frac{1.005}{1.006})}^{0.14}

0.9999 = {(\frac{1.005Pa*s}{1.006Pa*s})}^{0.14}

0.9999 = {(\frac{1.005}{1.006})}^{0.14}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Viscosity Correction Factor for Shell and Tube Heat Exchanger

Viscosity Correction Factor for Shell and Tube Heat Exchanger Solution

Follow our step by step solution on how to calculate Viscosity Correction Factor for Shell and Tube Heat Exchanger?

FIRST Step Consider the formula

μ Correction = {(\frac{μ fluid}{μ Wall})}^{0.14}

Next Step Substitute values of Variables

∴

μ Correction = {(\frac{1.005Pa*s}{1.006Pa*s})}^{0.14}

Next Step Prepare to Evaluate

∴

μ Correction = {(\frac{1.005}{1.006})}^{0.14}

Next Step Evaluate

∴

μ Correction = 0.999860775469323

LAST Step Rounding Answer

∴

μ Correction = 0.9999

Viscosity Correction Factor for Shell and Tube Heat Exchanger Formula Elements

Variables

Viscosity Correction Factor

Viscosity Correction Factor is ratio of fluid viscosity at mean temperature to fluid viscosity at the wall temperature.

Symbol: μ_Correction

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Viscosity Correction Factor

Fluid Viscosity at Bulk Temperature

Fluid viscosity at Bulk Temperature is a fundamental property of fluids that characterizes their resistance to flow. It is defined at the bulk temperature of the fluid.

Symbol: μ_fluid

Measurement: Dynamic ViscosityUnit: Pa*s

Note: Value should be greater than 0.

Formulas to find Fluid Viscosity at Bulk Temperature

Fluid Viscosity at Wall Temperature

Fluid Viscosity at Wall Temperature is defined at the temperature of the wall of pipe or surface at which the fluid is in contact with it.

Symbol: μ_Wall

Measurement: Dynamic ViscosityUnit: Pa*s

Note: Value should be greater than 0.

Formulas to find Fluid Viscosity at Wall Temperature

Other formulas in Basic Formulas of Heat Exchanger Designs category

Go Equivalent Diameter for Square Pitch in Heat Exchanger

D e = (\frac{1.27}{D Outer}) \cdot (({P Tube}^{2}) - 0.785 \cdot ({D Outer}^{2}))

Go Equivalent Diameter for Triangular Pitch in Heat Exchanger

D e = (\frac{1.10}{D Outer}) \cdot (({P Tube}^{2}) - 0.917 \cdot ({D Outer}^{2}))

Go Number of Baffles in Shell and Tube Heat Exchanger

N Baffles = (\frac{L Tube}{L Baffle}) - 1

Go Number of Tubes in Center Row Given Bundle Diameter and Tube Pitch

N r = \frac{D B}{P Tube}

How to Evaluate Viscosity Correction Factor for Shell and Tube Heat Exchanger?

Viscosity Correction Factor for Shell and Tube Heat Exchanger evaluator uses Viscosity Correction Factor = (Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^0.14 to evaluate the Viscosity Correction Factor, The Viscosity Correction Factor For Shell and Tube Heat Exchanger formula is defined as the ratio of viscosity of fluid at bulk temperature by viscosity of fluid at the wall temperature in pipe flow. Viscosity being function of temperature, the correction factor becomes important parameter. Viscosity Correction Factor is denoted by μ_Correction symbol.

How to evaluate Viscosity Correction Factor for Shell and Tube Heat Exchanger using this online evaluator? To use this online evaluator for Viscosity Correction Factor for Shell and Tube Heat Exchanger, enter Fluid Viscosity at Bulk Temperature (μ_fluid) & Fluid Viscosity at Wall Temperature (μ_Wall) and hit the calculate button.

FAQs on Viscosity Correction Factor for Shell and Tube Heat Exchanger

What is the formula to find Viscosity Correction Factor for Shell and Tube Heat Exchanger?

The formula of Viscosity Correction Factor for Shell and Tube Heat Exchanger is expressed as Viscosity Correction Factor = (Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^0.14. Here is an example- 0.999861 = (1.005/1.006)^0.14.

How to calculate Viscosity Correction Factor for Shell and Tube Heat Exchanger?

With Fluid Viscosity at Bulk Temperature (μ_fluid) & Fluid Viscosity at Wall Temperature (μ_Wall) we can find Viscosity Correction Factor for Shell and Tube Heat Exchanger using the formula - Viscosity Correction Factor = (Fluid Viscosity at Bulk Temperature/Fluid Viscosity at Wall Temperature)^0.14.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Viscosity Correction Factor for Shell and Tube Heat Exchanger Formula

Viscosity Correction Factor for Shell and Tube Heat Exchanger Example

Viscosity Correction Factor for Shell and Tube Heat Exchanger Solution

Viscosity Correction Factor for Shell and Tube Heat Exchanger Formula Elements

Other formulas in Basic Formulas of Heat Exchanger Designs category

How to Evaluate Viscosity Correction Factor for Shell and Tube Heat Exchanger?

FAQs on Viscosity Correction Factor for Shell and Tube Heat Exchanger

Variable Name