FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Vessel Wall Thickness for Channel Type Jacket Formula

Fx Copy

LaTeX Copy

Vessel thickness refers to the thickness of the walls of a pressure vessel, which is a container designed to hold gases or liquids at a pressure significantly different from the ambient pressure. Check FAQs

t vessel = d \cdot \sqrt{\frac{0.167 \cdot p j}{f j}} + c

t_vessel - Vessel Thickness?d - Design Length of Channel Section?p_j - Design Jacket Pressure?f_j - Allowable Stress for Jacket Material?c - Corrosion Allowance?

Vessel Wall Thickness for Channel Type Jacket Example

With values

With units

Only example

Here is how the Vessel Wall Thickness for Channel Type Jacket equation looks like with Values.

Here is how the Vessel Wall Thickness for Channel Type Jacket equation looks like with Units.

Here is how the Vessel Wall Thickness for Channel Type Jacket equation looks like.

11.374 = 72.3 \cdot \sqrt{\frac{0.167 \cdot 0.105}{120}} + 10.5

11.374mm = 72.3mm \cdot \sqrt{\frac{0.167 \cdot 0.105N/mm²}{120N/mm²}} + 10.5mm

11.374 = 72.3 \cdot \sqrt{\frac{0.167 \cdot 0.105}{120}} + 10.5

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Vessel Wall Thickness for Channel Type Jacket

Vessel Wall Thickness for Channel Type Jacket Solution

Follow our step by step solution on how to calculate Vessel Wall Thickness for Channel Type Jacket?

FIRST Step Consider the formula

t vessel = d \cdot \sqrt{\frac{0.167 \cdot p j}{f j}} + c

Next Step Substitute values of Variables

∴

t vessel = 72.3mm \cdot \sqrt{\frac{0.167 \cdot 0.105N/mm²}{120N/mm²}} + 10.5mm

Next Step Prepare to Evaluate

∴

t vessel = 72.3 \cdot \sqrt{\frac{0.167 \cdot 0.105}{120}} + 10.5

Next Step Evaluate

∴

t vessel = 0.0113739781182902m

Next Step Convert to Output's Unit

∴

t vessel = 11.3739781182902mm

LAST Step Rounding Answer

∴

t vessel = 11.374mm

Vessel Wall Thickness for Channel Type Jacket Formula Elements

Variables

Functions

Vessel Thickness

Vessel thickness refers to the thickness of the walls of a pressure vessel, which is a container designed to hold gases or liquids at a pressure significantly different from the ambient pressure.

Symbol: t_vessel

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Vessel Thickness

Design Length of Channel Section

Design Length of Channel Section is the distance between the centre of reactions between channel section.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Design Length of Channel Section

Design Jacket Pressure

Design Jacket Pressure refers to a type of pressure vessel designed to withstand high pressures and temperatures, typically used for containing gases or liquids under extreme conditions.

Symbol: p_j

Measurement: PressureUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Design Jacket Pressure

Allowable Stress for Jacket Material

Allowable Stress for Jacket Material at Design Temperature is defined as the material failure stress divided by a factor of safety greater than one.

Symbol: f_j

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Allowable Stress for Jacket Material

Corrosion Allowance

Corrosion allowance is defined as an extra thickness normally added to carbon and low alloy steel to mitigate the CO2 corrosion rate.

Symbol: c

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Corrosion Allowance

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other formulas in Jacketed Reaction Vessel category

Go Required Thickness for Jacket Closer Member with Jacket Width

t rc = 0.886 \cdot w j \cdot \sqrt{\frac{p j}{f j}}

Go Jacket Width

w j = \frac{D ij - OD Vessel}{2}

Go Required Plate Thickness for Dimple Jacket

t j (minimum) = Maximum Pitch \cdot \sqrt{\frac{p j}{3 \cdot f j}}

Go Maximum Hoop Stress in Coil at Junction with Shell

f cc = \frac{p j \cdot d i}{2 \cdot t coil \cdot J coil}

How to Evaluate Vessel Wall Thickness for Channel Type Jacket?

Vessel Wall Thickness for Channel Type Jacket evaluator uses Vessel Thickness = Design Length of Channel Section*sqrt((0.167*Design Jacket Pressure)/(Allowable Stress for Jacket Material))+Corrosion Allowance to evaluate the Vessel Thickness, Vessel Wall Thickness for Channel Type Jacket refers to the minimum required thickness of the wall of a vessel that is designed with an external jacket for heating or cooling purposes. Vessel Thickness is denoted by t_vessel symbol.

How to evaluate Vessel Wall Thickness for Channel Type Jacket using this online evaluator? To use this online evaluator for Vessel Wall Thickness for Channel Type Jacket, enter Design Length of Channel Section (d), Design Jacket Pressure (p_j), Allowable Stress for Jacket Material (f_j) & Corrosion Allowance (c) and hit the calculate button.

FAQs on Vessel Wall Thickness for Channel Type Jacket

What is the formula to find Vessel Wall Thickness for Channel Type Jacket?

The formula of Vessel Wall Thickness for Channel Type Jacket is expressed as Vessel Thickness = Design Length of Channel Section*sqrt((0.167*Design Jacket Pressure)/(Allowable Stress for Jacket Material))+Corrosion Allowance. Here is an example- 11373.98 = 0.0723*sqrt((0.167*105000)/(120000000))+0.0105.

How to calculate Vessel Wall Thickness for Channel Type Jacket?

With Design Length of Channel Section (d), Design Jacket Pressure (p_j), Allowable Stress for Jacket Material (f_j) & Corrosion Allowance (c) we can find Vessel Wall Thickness for Channel Type Jacket using the formula - Vessel Thickness = Design Length of Channel Section*sqrt((0.167*Design Jacket Pressure)/(Allowable Stress for Jacket Material))+Corrosion Allowance. This formula also uses Square Root (sqrt) function(s).

Can the Vessel Wall Thickness for Channel Type Jacket be negative?

No, the Vessel Wall Thickness for Channel Type Jacket, measured in Length cannot be negative.

Which unit is used to measure Vessel Wall Thickness for Channel Type Jacket?

Vessel Wall Thickness for Channel Type Jacket is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Vessel Wall Thickness for Channel Type Jacket can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Vessel Wall Thickness for Channel Type Jacket Formula

Vessel Wall Thickness for Channel Type Jacket Example

Vessel Wall Thickness for Channel Type Jacket Solution

Vessel Wall Thickness for Channel Type Jacket Formula Elements

Other formulas in Jacketed Reaction Vessel category

How to Evaluate Vessel Wall Thickness for Channel Type Jacket?

FAQs on Vessel Wall Thickness for Channel Type Jacket

Variable Name