FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Velocity at Section 1 for Steady Flow Formula

Fx Copy

LaTeX Copy

Initial Velocity at Point 1 is the rate of change of its position with respect to a frame of reference and is a function of time. Check FAQs

u 01 = \frac{Q}{A cs \cdot ρ 1}

u₀₁ - Initial Velocity at Point 1?Q - Discharge of Fluid?A_cs - Cross-Sectional Area?ρ₁ - Density of Liquid 1?

Velocity at Section 1 for Steady Flow Example

With values

With units

Only example

Here is how the Velocity at Section 1 for Steady Flow equation looks like with Values.

Here is how the Velocity at Section 1 for Steady Flow equation looks like with Units.

Here is how the Velocity at Section 1 for Steady Flow equation looks like.

3.8846 = \frac{1.01}{13 \cdot 0.02}

3.8846m/s = \frac{1.01m³/s}{13m² \cdot 0.02kg/m³}

3.8846 = \frac{1.01}{13 \cdot 0.02}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Velocity at Section 1 for Steady Flow

Velocity at Section 1 for Steady Flow Solution

Follow our step by step solution on how to calculate Velocity at Section 1 for Steady Flow?

FIRST Step Consider the formula

u 01 = \frac{Q}{A cs \cdot ρ 1}

Next Step Substitute values of Variables

∴

u 01 = \frac{1.01m³/s}{13m² \cdot 0.02kg/m³}

Next Step Prepare to Evaluate

∴

u 01 = \frac{1.01}{13 \cdot 0.02}

Next Step Evaluate

∴

u 01 = 3.88461538461538m/s

LAST Step Rounding Answer

∴

u 01 = 3.8846m/s

Velocity at Section 1 for Steady Flow Formula Elements

Variables

Initial Velocity at Point 1

Initial Velocity at Point 1 is the rate of change of its position with respect to a frame of reference and is a function of time.

Symbol: u₀₁

Measurement: SpeedUnit: m/s

Note: Value can be positive or negative.

Formulas to find Initial Velocity at Point 1

Discharge of Fluid

Discharge of Fluid is a measure of the quantity of any fluid flow over unit time.

Symbol: Q

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value can be positive or negative.

Formulas to find Discharge of Fluid

Cross-Sectional Area

Cross-Sectional Area is the area of a two-dimensional shape that is obtained when a three-dimensional shape is sliced perpendicular to some specified axis at a point.

Symbol: A_cs

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Cross-Sectional Area

Density of Liquid 1

Density of Liquid 1 is a measure of how heavy it is for the amount measured.

Symbol: ρ₁

Measurement: DensityUnit: kg/m³

Note: Value can be positive or negative.

Formulas to find Density of Liquid 1

Other formulas in Continuity Equation category

Go Mass Density at Section 1 for Steady Flow

ρ 1 = \frac{Q}{A cs \cdot V Negativesurges}

Go Cross Sectional Area at Section 1 for Steady Flow

A cs = \frac{Q}{ρ 1 \cdot V Negativesurges}

Go Mass Density at Section 2 given Flow at Section 1 for Steady Flow

ρ 2 = \frac{Q}{A cs \cdot V 2}

Go Velocity at Section 2 given Flow at Section 1 for Steady Flow

u 02 = \frac{Q}{A cs \cdot ρ 2}

How to Evaluate Velocity at Section 1 for Steady Flow?

Velocity at Section 1 for Steady Flow evaluator uses Initial Velocity at Point 1 = Discharge of Fluid/(Cross-Sectional Area*Density of Liquid 1) to evaluate the Initial Velocity at Point 1, The Velocity at Section 1 for Steady Flow formula is defined as velocity of flow at a particular point in the stream. Initial Velocity at Point 1 is denoted by u₀₁ symbol.

How to evaluate Velocity at Section 1 for Steady Flow using this online evaluator? To use this online evaluator for Velocity at Section 1 for Steady Flow, enter Discharge of Fluid (Q), Cross-Sectional Area (A_cs) & Density of Liquid 1 (ρ₁) and hit the calculate button.

FAQs on Velocity at Section 1 for Steady Flow

What is the formula to find Velocity at Section 1 for Steady Flow?

The formula of Velocity at Section 1 for Steady Flow is expressed as Initial Velocity at Point 1 = Discharge of Fluid/(Cross-Sectional Area*Density of Liquid 1). Here is an example- 3.884615 = 1.01/(13*0.02).

How to calculate Velocity at Section 1 for Steady Flow?

With Discharge of Fluid (Q), Cross-Sectional Area (A_cs) & Density of Liquid 1 (ρ₁) we can find Velocity at Section 1 for Steady Flow using the formula - Initial Velocity at Point 1 = Discharge of Fluid/(Cross-Sectional Area*Density of Liquid 1).

Can the Velocity at Section 1 for Steady Flow be negative?

Yes, the Velocity at Section 1 for Steady Flow, measured in Speed can be negative.

Which unit is used to measure Velocity at Section 1 for Steady Flow?

Velocity at Section 1 for Steady Flow is usually measured using the Meter per Second[m/s] for Speed. Meter per Minute[m/s], Meter per Hour[m/s], Kilometer per Hour[m/s] are the few other units in which Velocity at Section 1 for Steady Flow can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Velocity at Section 1 for Steady Flow Formula

Velocity at Section 1 for Steady Flow Example

Velocity at Section 1 for Steady Flow Solution

Velocity at Section 1 for Steady Flow Formula Elements

Other formulas in Continuity Equation category

How to Evaluate Velocity at Section 1 for Steady Flow?

FAQs on Velocity at Section 1 for Steady Flow

Variable Name