FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Formula

Fx Copy

LaTeX Copy

Upward Thrust for parabolic tendon can be described as the force per unit length of the tendon. Check FAQs

W up = \frac{δ \cdot 384 \cdot E \cdot I A}{5 \cdot L^{4}}

W_up - Upward Thrust?δ - Deflection due to Moments on Arch Dam?E - Young's Modulus?I_A - Second Moment of Area?L - Span Length?

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Example

With values

With units

Only example

Here is how the Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon equation looks like with Values.

Here is how the Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon equation looks like with Units.

Here is how the Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon equation looks like.

0.8423 = \frac{48.1 \cdot 384 \cdot 15 \cdot 9.5}{5 \cdot 5^{4}}

0.8423kN/m = \frac{48.1m \cdot 384 \cdot 15Pa \cdot 9.5m⁴}{5 \cdot {5m}^{4}}

0.8423 = \frac{48.1 \cdot 384 \cdot 15 \cdot 9.5}{5 \cdot 5^{4}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Structural Engineering » fx Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Solution

Follow our step by step solution on how to calculate Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon?

FIRST Step Consider the formula

W up = \frac{δ \cdot 384 \cdot E \cdot I A}{5 \cdot L^{4}}

Next Step Substitute values of Variables

∴

W up = \frac{48.1m \cdot 384 \cdot 15Pa \cdot 9.5m⁴}{5 \cdot {5m}^{4}}

Next Step Prepare to Evaluate

∴

W up = \frac{48.1 \cdot 384 \cdot 15 \cdot 9.5}{5 \cdot 5^{4}}

Next Step Evaluate

∴

W up = 842.25024N/m

Next Step Convert to Output's Unit

∴

W up = 0.84225024kN/m

LAST Step Rounding Answer

∴

W up = 0.8423kN/m

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Formula Elements

Variables

Upward Thrust

Upward Thrust for parabolic tendon can be described as the force per unit length of the tendon.

Symbol: W_up

Measurement: Surface TensionUnit: kN/m

Note: Value should be greater than 0.

Formulas to find Upward Thrust

Deflection due to Moments on Arch Dam

The Deflection due to Moments on Arch Dam is the degree to which a structural element is displaced under a load (due to its deformation).

Symbol: δ

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Deflection due to Moments on Arch Dam

Young's Modulus

Young's Modulus is a mechanical property of linear elastic solid substances. It describes the relationship between longitudinal stress and longitudinal strain.

Symbol: E

Measurement: PressureUnit: Pa

Note: Value should be greater than 0.

Formulas to find Young's Modulus

Second Moment of Area

Second Moment of Area is a measure of the 'efficiency' of a shape to resist bending caused by loading. The second moment of area is a measure of a shape's resistance to change.

Symbol: I_A

Measurement: Second Moment of AreaUnit: m⁴

Note: Value should be greater than 0.

Formulas to find Second Moment of Area

Span Length

Span Length is the end to end distance between any beam or slab.

Symbol: L

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Span Length

Other formulas in Deflection due to Prestressing Force category

Go Deflection due to Prestressing for Parabolic Tendon

δ = (\frac{5}{384}) \cdot (\frac{W up \cdot L^{4}}{E \cdot I A})

Go Flexural Rigidity given Deflection due to Prestressing for Parabolic Tendon

EI = (\frac{5}{384}) \cdot (\frac{W up \cdot L^{4}}{δ})

Go Young's Modulus given Deflection due to Prestressing for Parabolic Tendon

E = (\frac{5}{384}) \cdot (\frac{W up \cdot L^{4}}{δ \cdot I A})

Go Moment of Inertia for Deflection due to Prestressing for Parabolic Tendon

I p = (\frac{5}{384}) \cdot (\frac{W up \cdot L^{4}}{e})

How to Evaluate Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon?

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon evaluator uses Upward Thrust = (Deflection due to Moments on Arch Dam*384*Young's Modulus*Second Moment of Area)/(5*Span Length^4) to evaluate the Upward Thrust, The Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon is defined as force or push. when system pushes or accelerates mass in one direction, there is thrust (force) just as large in opposite direction. Upward Thrust is denoted by W_up symbol.

How to evaluate Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon using this online evaluator? To use this online evaluator for Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon, enter Deflection due to Moments on Arch Dam (δ), Young's Modulus (E), Second Moment of Area (I_A) & Span Length (L) and hit the calculate button.

FAQs on Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon

What is the formula to find Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon?

The formula of Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon is expressed as Upward Thrust = (Deflection due to Moments on Arch Dam*384*Young's Modulus*Second Moment of Area)/(5*Span Length^4). Here is an example- 0.000842 = (48.1*384*15*9.5)/(5*5^4).

How to calculate Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon?

With Deflection due to Moments on Arch Dam (δ), Young's Modulus (E), Second Moment of Area (I_A) & Span Length (L) we can find Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon using the formula - Upward Thrust = (Deflection due to Moments on Arch Dam*384*Young's Modulus*Second Moment of Area)/(5*Span Length^4).

Can the Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon be negative?

No, the Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon, measured in Surface Tension cannot be negative.

Which unit is used to measure Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon?

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon is usually measured using the Kilonewton per Meter[kN/m] for Surface Tension. Newton per Meter[kN/m], Millinewton per Meter[kN/m], Gram-Force per Centimeter[kN/m] are the few other units in which Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Formula

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Example

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Solution

Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon Formula Elements

Other formulas in Deflection due to Prestressing Force category

How to Evaluate Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon?

FAQs on Uplift Thrust when Deflection due to Prestressing for Parabolic Tendon

Variable Name