FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Trips per Hour given Production of Scrap by Machines Formula

GoTrips per Hour for Excavating Scrap Formula

Fx Copy

LaTeX Copy

Trips per Hour means the total transfer occured in a hour. Check FAQs

f = (\frac{P s}{L})

f - Trips per Hour?P_s - Production Required in Scraper Production?L - Load in Scraper Production?

Trips per Hour given Production of Scrap by Machines Example

With values

With units

Only example

Here is how the Trips per Hour given Production of Scrap by Machines equation looks like with Values.

Here is how the Trips per Hour given Production of Scrap by Machines equation looks like with Units.

Here is how the Trips per Hour given Production of Scrap by Machines equation looks like.

4.1209 = (\frac{75}{18.2})

4.1209rev/h = (\frac{75m³/hr}{18.2m³})

4.1209 = (\frac{75}{18.2})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Trips per Hour given Production of Scrap by Machines

Trips per Hour given Production of Scrap by Machines Solution

Follow our step by step solution on how to calculate Trips per Hour given Production of Scrap by Machines?

FIRST Step Consider the formula

f = (\frac{P s}{L})

Next Step Substitute values of Variables

∴

f = (\frac{75m³/hr}{18.2m³})

Next Step Convert Units

∴

f = (\frac{0.0208m³/s}{18.2m³})

Next Step Prepare to Evaluate

∴

f = (\frac{0.0208}{18.2})

Next Step Evaluate

∴

f = 0.00114468864468864Hz

Next Step Convert to Output's Unit

∴

f = 4.12087912087912rev/h

LAST Step Rounding Answer

∴

f = 4.1209rev/h

Trips per Hour given Production of Scrap by Machines Formula Elements

Variables

Trips per Hour

Trips per Hour means the total transfer occured in a hour.

Symbol: f

Measurement: FrequencyUnit: rev/h

Note: Value should be greater than 0.

Formulas to find Trips per Hour

Production Required in Scraper Production

Production Required in Scraper Production is the amount of scrap produced.

Symbol: P_s

Measurement: Volumetric Flow RateUnit: m³/hr

Note: Value should be greater than 0.

Formulas to find Production Required in Scraper Production

Load in Scraper Production

Load in Scraper Production is the volume of scrap produced in every trip.

Symbol: L

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Load in Scraper Production

Other Formulas to find Trips per Hour

Go Trips per Hour for Excavating Scrap

f = (\frac{W T}{C t})

Other formulas in Scraper Production category

Go Production of Scrap by Machines

P s = (L \cdot f)

Go Load Given Production of Scrap by Machines

L = (\frac{P s}{f})

Go Working Time given Trips per Hour for Excavating Scrap

W T = (f \cdot C t)

Go Cycle Time given Trips per Hour for Excavating Scrap

C t = (\frac{W T}{f})

How to Evaluate Trips per Hour given Production of Scrap by Machines?

Trips per Hour given Production of Scrap by Machines evaluator uses Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production) to evaluate the Trips per Hour, The Trips per Hour given Production of Scrap by Machines is defined as the number of trips which will be needed for production of scrap. Trips per Hour is denoted by f symbol.

How to evaluate Trips per Hour given Production of Scrap by Machines using this online evaluator? To use this online evaluator for Trips per Hour given Production of Scrap by Machines, enter Production Required in Scraper Production (P_s) & Load in Scraper Production (L) and hit the calculate button.

FAQs on Trips per Hour given Production of Scrap by Machines

What is the formula to find Trips per Hour given Production of Scrap by Machines?

The formula of Trips per Hour given Production of Scrap by Machines is expressed as Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production). Here is an example- 14835.16 = (0.0208333333333333/18.2).

How to calculate Trips per Hour given Production of Scrap by Machines?

With Production Required in Scraper Production (P_s) & Load in Scraper Production (L) we can find Trips per Hour given Production of Scrap by Machines using the formula - Trips per Hour = (Production Required in Scraper Production/Load in Scraper Production).

What are the other ways to Calculate Trips per Hour?

Here are the different ways to Calculate Trips per Hour-

Trips per Hour=(Working Time in Scraper Production/Cycle Time)

Can the Trips per Hour given Production of Scrap by Machines be negative?

No, the Trips per Hour given Production of Scrap by Machines, measured in Frequency cannot be negative.

Which unit is used to measure Trips per Hour given Production of Scrap by Machines?

Trips per Hour given Production of Scrap by Machines is usually measured using the Revolution per Hour[rev/h] for Frequency. Hertz[rev/h], Petahertz[rev/h], Terahertz[rev/h] are the few other units in which Trips per Hour given Production of Scrap by Machines can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Trips per Hour given Production of Scrap by Machines Formula

​GoTrips per Hour for Excavating Scrap Formula

Trips per Hour given Production of Scrap by Machines Example

Trips per Hour given Production of Scrap by Machines Solution

Trips per Hour given Production of Scrap by Machines Formula Elements

Other Formulas to find Trips per Hour

Other formulas in Scraper Production category

How to Evaluate Trips per Hour given Production of Scrap by Machines?

FAQs on Trips per Hour given Production of Scrap by Machines

Variable Name

GoTrips per Hour for Excavating Scrap Formula