FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Trips per Hour for Excavating Scrap Formula

GoTrips per Hour given Production of Scrap by Machines Formula

Fx Copy

LaTeX Copy

Trips per Hour means the total transfer occured in a hour. Check FAQs

f = (\frac{W T}{C t})

f - Trips per Hour?W_T - Working Time in Scraper Production?C_t - Cycle Time?

Trips per Hour for Excavating Scrap Example

With values

With units

Only example

Here is how the Trips per Hour for Excavating Scrap equation looks like with Values.

Here is how the Trips per Hour for Excavating Scrap equation looks like with Units.

Here is how the Trips per Hour for Excavating Scrap equation looks like.

3.8 = (\frac{22.8}{6})

3.8rev/h = (\frac{22.8}{6h})

3.8 = (\frac{22.8}{6})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Trips per Hour for Excavating Scrap

Trips per Hour for Excavating Scrap Solution

Follow our step by step solution on how to calculate Trips per Hour for Excavating Scrap?

FIRST Step Consider the formula

f = (\frac{W T}{C t})

Next Step Substitute values of Variables

∴

f = (\frac{22.8}{6h})

Next Step Convert Units

∴

f = (\frac{22.8}{21600s})

Next Step Prepare to Evaluate

∴

f = (\frac{22.8}{21600})

Next Step Evaluate

∴

f = 0.00105555555555556Hz

LAST Step Convert to Output's Unit

∴

f = 3.8rev/h

Trips per Hour for Excavating Scrap Formula Elements

Variables

Trips per Hour

Trips per Hour means the total transfer occured in a hour.

Symbol: f

Measurement: FrequencyUnit: rev/h

Note: Value should be greater than 0.

Formulas to find Trips per Hour

Working Time in Scraper Production

Working Time in Scraper Production is the ratio of time which is expressed in hr/hr.

Symbol: W_T

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Working Time in Scraper Production

Cycle Time

Cycle Time is the time taken to complete one trip.

Symbol: C_t

Measurement: TimeUnit: h

Note: Value should be greater than 0.

Formulas to find Cycle Time

Other Formulas to find Trips per Hour

Go Trips per Hour given Production of Scrap by Machines

f = (\frac{P s}{L})

Other formulas in Scraper Production category

Go Production of Scrap by Machines

P s = (L \cdot f)

Go Load Given Production of Scrap by Machines

L = (\frac{P s}{f})

Go Working Time given Trips per Hour for Excavating Scrap

W T = (f \cdot C t)

Go Cycle Time given Trips per Hour for Excavating Scrap

C t = (\frac{W T}{f})

How to Evaluate Trips per Hour for Excavating Scrap?

Trips per Hour for Excavating Scrap evaluator uses Trips per Hour = (Working Time in Scraper Production/Cycle Time) to evaluate the Trips per Hour, The Trips per Hour for Excavating Scrap is defined as the number of trips in one hour when working time and cycle time is known. Trips per Hour is denoted by f symbol.

How to evaluate Trips per Hour for Excavating Scrap using this online evaluator? To use this online evaluator for Trips per Hour for Excavating Scrap, enter Working Time in Scraper Production (W_T) & Cycle Time (C_t) and hit the calculate button.

FAQs on Trips per Hour for Excavating Scrap

What is the formula to find Trips per Hour for Excavating Scrap?

The formula of Trips per Hour for Excavating Scrap is expressed as Trips per Hour = (Working Time in Scraper Production/Cycle Time). Here is an example- 13680 = (22.8/21600).

How to calculate Trips per Hour for Excavating Scrap?

With Working Time in Scraper Production (W_T) & Cycle Time (C_t) we can find Trips per Hour for Excavating Scrap using the formula - Trips per Hour = (Working Time in Scraper Production/Cycle Time).

What are the other ways to Calculate Trips per Hour?

Here are the different ways to Calculate Trips per Hour-

Trips per Hour=(Production Required in Scraper Production/Load in Scraper Production)

Can the Trips per Hour for Excavating Scrap be negative?

No, the Trips per Hour for Excavating Scrap, measured in Frequency cannot be negative.

Which unit is used to measure Trips per Hour for Excavating Scrap?

Trips per Hour for Excavating Scrap is usually measured using the Revolution per Hour[rev/h] for Frequency. Hertz[rev/h], Petahertz[rev/h], Terahertz[rev/h] are the few other units in which Trips per Hour for Excavating Scrap can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Trips per Hour for Excavating Scrap Formula

​GoTrips per Hour given Production of Scrap by Machines Formula

Trips per Hour for Excavating Scrap Example

Trips per Hour for Excavating Scrap Solution

Trips per Hour for Excavating Scrap Formula Elements

Other Formulas to find Trips per Hour

Other formulas in Scraper Production category

How to Evaluate Trips per Hour for Excavating Scrap?

FAQs on Trips per Hour for Excavating Scrap

Variable Name

GoTrips per Hour given Production of Scrap by Machines Formula