Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR Formula

Fx Copy
LaTeX Copy
Traverse Speed of Work Table refers to the reciprocating back-and-forth motion of the worktable that holds the workpiece. It is crucial for achieving desired shape and finish during grinding. Check FAQs
Vtrav=Zwfdcut
Vtrav - Traverse Speed of Work Table?Zw - Metal Removal Rate?f - Feed Rate?dcut - Depth of Cut?

Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR Example

With values
With units
Only example

Here is how the Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR equation looks like with Values.

Here is how the Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR equation looks like with Units.

Here is how the Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR equation looks like.

0.3695Edit=0.0038Edit0.7Edit14.4964Edit
You are here -
HomeIcon Home » Category Engineering » Category Production Engineering » Category Metal Machining » fx Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR

Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR Solution

Follow our step by step solution on how to calculate Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR?

FIRST Step Consider the formula
Vtrav=Zwfdcut
Next Step Substitute values of Variables
Vtrav=0.0038m³/s0.7m/rev14.4964mm
Next Step Convert Units
Vtrav=0.0038m³/s0.7m/rev0.0145m
Next Step Prepare to Evaluate
Vtrav=0.00380.70.0145
Next Step Evaluate
Vtrav=0.369549113619205m/s
LAST Step Rounding Answer
Vtrav=0.3695m/s

Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR Formula Elements

Variables
Traverse Speed of Work Table
Traverse Speed of Work Table refers to the reciprocating back-and-forth motion of the worktable that holds the workpiece. It is crucial for achieving desired shape and finish during grinding.
Symbol: Vtrav
Measurement: SpeedUnit: m/s
Note: Value should be greater than 0.
Metal Removal Rate
Metal Removal Rate (MRR) is the amount of volume removed from workpiece per unit time, when performing machining operations such as grinding.
Symbol: Zw
Measurement: Volumetric Flow RateUnit: m³/s
Note: Value should be greater than 0.
Feed Rate
Feed Rate refers to the speed at which the cutting tool advances against the workpiece. It essentially controls how much material is removed with each pass of the tool.
Symbol: f
Measurement: FeedUnit: m/rev
Note: Value should be greater than 0.
Depth of Cut
Depth of Cut is the tertiary cutting motion that provides a necessary depth to material that is required to remove by machining. It is usually given in the third perpendicular direction.
Symbol: dcut
Measurement: LengthUnit: mm
Note: Value should be greater than 0.

Other formulas in Grain category

​Go Metal removal rate during Grinding
Zw=fiapVw
​Go Infeed given Metal Removal Rate during Grinding
Fin=ZwApVw
​Go Width of Grinding Path given Metal Removal Rate
ap=ZwfiVw
​Go Grain-aspect Ratio
rg=wgMaxtgMax

How to Evaluate Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR?

Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR evaluator uses Traverse Speed of Work Table = Metal Removal Rate/(Feed Rate*Depth of Cut) to evaluate the Traverse Speed of Work Table, Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR, is a method to determine the back-and-forth movement of worktable relative to grinding wheel when the amount of required MRR is known. Traverse speed is given according to different parameters such as desired surface finish, different grit size of grinding wheel etc. Traverse Speed of Work Table is denoted by Vtrav symbol.

How to evaluate Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR using this online evaluator? To use this online evaluator for Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR, enter Metal Removal Rate (Zw), Feed Rate (f) & Depth of Cut (dcut) and hit the calculate button.

FAQs on Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR

What is the formula to find Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR?
The formula of Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR is expressed as Traverse Speed of Work Table = Metal Removal Rate/(Feed Rate*Depth of Cut). Here is an example- 0.369549 = 0.00375/(0.7*0.01449643).
How to calculate Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR?
With Metal Removal Rate (Zw), Feed Rate (f) & Depth of Cut (dcut) we can find Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR using the formula - Traverse Speed of Work Table = Metal Removal Rate/(Feed Rate*Depth of Cut).
Can the Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR be negative?
No, the Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR, measured in Speed cannot be negative.
Which unit is used to measure Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR?
Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR is usually measured using the Meter per Second[m/s] for Speed. Meter per Minute[m/s], Meter per Hour[m/s], Kilometer per Hour[m/s] are the few other units in which Traverse Speed in Horizontal and Vertical Spindle Surface-Grinder given MRR can be measured.
Copied!