FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Traverse Speed for Cylindrical and Internal Grinder given MRR Formula

Fx Copy

LaTeX Copy

Traverse Speed in Cylindrical Grinding refers to the reciprocating back-and-forth motion of the worktable that holds the workpiece. It's crucial for achieving desired shape and finish during grinding. Check FAQs

U trav = \frac{Z w}{π \cdot f \cdot D m}

U_trav - Traverse Speed in Cylindrical Grinding?Z_w - Metal Removal Rate?f - Feed Rate?D_m - Diameter of Machined Surface?π - Archimedes' constant?

Traverse Speed for Cylindrical and Internal Grinder given MRR Example

With values

With units

Only example

Here is how the Traverse Speed for Cylindrical and Internal Grinder given MRR equation looks like with Values.

Here is how the Traverse Speed for Cylindrical and Internal Grinder given MRR equation looks like with Units.

Here is how the Traverse Speed for Cylindrical and Internal Grinder given MRR equation looks like.

0.0048 = \frac{0.0038}{3.1416 \cdot 0.7 \cdot 352.74}

0.0048m/s = \frac{0.0038m³/s}{3.1416 \cdot 0.7m/rev \cdot 352.74mm}

0.0048 = \frac{0.0038}{3.1416 \cdot 0.7 \cdot 352.74}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Metal Machining » fx Traverse Speed for Cylindrical and Internal Grinder given MRR

Traverse Speed for Cylindrical and Internal Grinder given MRR Solution

Follow our step by step solution on how to calculate Traverse Speed for Cylindrical and Internal Grinder given MRR?

FIRST Step Consider the formula

U trav = \frac{Z w}{π \cdot f \cdot D m}

Next Step Substitute values of Variables

∴

U trav = \frac{0.0038m³/s}{π \cdot 0.7m/rev \cdot 352.74mm}

Next Step Substitute values of Constants

∴

U trav = \frac{0.0038m³/s}{3.1416 \cdot 0.7m/rev \cdot 352.74mm}

Next Step Convert Units

∴

U trav = \frac{0.0038m³/s}{3.1416 \cdot 0.7m/rev \cdot 0.3527m}

Next Step Prepare to Evaluate

∴

U trav = \frac{0.0038}{3.1416 \cdot 0.7 \cdot 0.3527}

Next Step Evaluate

∴

U trav = 0.00483424486343327m/s

LAST Step Rounding Answer

∴

U trav = 0.0048m/s

Traverse Speed for Cylindrical and Internal Grinder given MRR Formula Elements

Variables

Constants

Traverse Speed in Cylindrical Grinding

Symbol: U_trav

Measurement: SpeedUnit: m/s

Note: Value should be greater than 0.

Formulas to find Traverse Speed in Cylindrical Grinding

Metal Removal Rate

Metal Removal Rate (MRR) is the amount of volume removed from workpiece per unit time, when performing machining operations such as grinding.

Symbol: Z_w

Measurement: Volumetric Flow RateUnit: m³/s

Note: Value should be greater than 0.

Formulas to find Metal Removal Rate

Feed Rate

Feed Rate refers to the speed at which the cutting tool advances against the workpiece. It essentially controls how much material is removed with each pass of the tool.

Symbol: f

Measurement: FeedUnit: m/rev

Note: Value should be greater than 0.

Formulas to find Feed Rate

Diameter of Machined Surface

Diameter of Machined Surface refers to the final diameter of a feature created by machining operation, specifically focusing on the measurement across the machined area.

Symbol: D_m

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Machined Surface

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

Other formulas in Grain category

Go Metal removal rate during Grinding

Z w = f i \cdot a p \cdot V w

Go Infeed given Metal Removal Rate during Grinding

F in = \frac{Z w}{A p \cdot V w}

Go Width of Grinding Path given Metal Removal Rate

a p = \frac{Z w}{f i \cdot V w}

Go Grain-aspect Ratio

r g = \frac{w gMax}{t gMax}

How to Evaluate Traverse Speed for Cylindrical and Internal Grinder given MRR?

Traverse Speed for Cylindrical and Internal Grinder given MRR evaluator uses Traverse Speed in Cylindrical Grinding = Metal Removal Rate/(pi*Feed Rate*Diameter of Machined Surface) to evaluate the Traverse Speed in Cylindrical Grinding, Traverse Speed for Cylindrical and Internal Grinder given MRR, is a method to determine the back-and-forth movement of worktable relative to grinding wheel when the amount of required MRR is known. Traverse speed is given according to different parameters such as desired surface finish, different grit size of grinding wheel etc. Traverse Speed in Cylindrical Grinding is denoted by U_trav symbol.

How to evaluate Traverse Speed for Cylindrical and Internal Grinder given MRR using this online evaluator? To use this online evaluator for Traverse Speed for Cylindrical and Internal Grinder given MRR, enter Metal Removal Rate (Z_w), Feed Rate (f) & Diameter of Machined Surface (D_m) and hit the calculate button.

FAQs on Traverse Speed for Cylindrical and Internal Grinder given MRR

What is the formula to find Traverse Speed for Cylindrical and Internal Grinder given MRR?

The formula of Traverse Speed for Cylindrical and Internal Grinder given MRR is expressed as Traverse Speed in Cylindrical Grinding = Metal Removal Rate/(pi*Feed Rate*Diameter of Machined Surface). Here is an example- 0.004834 = 0.00375/(pi*0.7*0.35274).

How to calculate Traverse Speed for Cylindrical and Internal Grinder given MRR?

With Metal Removal Rate (Z_w), Feed Rate (f) & Diameter of Machined Surface (D_m) we can find Traverse Speed for Cylindrical and Internal Grinder given MRR using the formula - Traverse Speed in Cylindrical Grinding = Metal Removal Rate/(pi*Feed Rate*Diameter of Machined Surface). This formula also uses Archimedes' constant .

Can the Traverse Speed for Cylindrical and Internal Grinder given MRR be negative?

No, the Traverse Speed for Cylindrical and Internal Grinder given MRR, measured in Speed cannot be negative.

Which unit is used to measure Traverse Speed for Cylindrical and Internal Grinder given MRR?

Traverse Speed for Cylindrical and Internal Grinder given MRR is usually measured using the Meter per Second[m/s] for Speed. Meter per Minute[m/s], Meter per Hour[m/s], Kilometer per Hour[m/s] are the few other units in which Traverse Speed for Cylindrical and Internal Grinder given MRR can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Traverse Speed for Cylindrical and Internal Grinder given MRR Formula

Traverse Speed for Cylindrical and Internal Grinder given MRR Example

Traverse Speed for Cylindrical and Internal Grinder given MRR Solution

Traverse Speed for Cylindrical and Internal Grinder given MRR Formula Elements

Other formulas in Grain category

How to Evaluate Traverse Speed for Cylindrical and Internal Grinder given MRR?

FAQs on Traverse Speed for Cylindrical and Internal Grinder given MRR

Variable Name