FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Transverse Shrinkage of Restrained Joint Formula

Fx Copy

LaTeX Copy

Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal. Check FAQs

s = \frac{S}{1 + 0.086 \cdot {k s}^{0.87}}

s - Transverse Shrinkage?S - Transverse Shrinkage of Unrestrained Joint?k_s - Degree of Restraint?

Transverse Shrinkage of Restrained Joint Example

With values

With units

Only example

Here is how the Transverse Shrinkage of Restrained Joint equation looks like with Values.

Here is how the Transverse Shrinkage of Restrained Joint equation looks like with Units.

Here is how the Transverse Shrinkage of Restrained Joint equation looks like.

4 = \frac{100}{1 + 0.086 \cdot {647.3872}^{0.87}}

4mm = \frac{100mm}{1 + 0.086 \cdot {647.3872}^{0.87}}

4 = \frac{100}{1 + 0.086 \cdot {647.3872}^{0.87}}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Welding » fx Transverse Shrinkage of Restrained Joint

Transverse Shrinkage of Restrained Joint Solution

Follow our step by step solution on how to calculate Transverse Shrinkage of Restrained Joint?

FIRST Step Consider the formula

s = \frac{S}{1 + 0.086 \cdot {k s}^{0.87}}

Next Step Substitute values of Variables

∴

s = \frac{100mm}{1 + 0.086 \cdot {647.3872}^{0.87}}

Next Step Convert Units

∴

s = \frac{0.1m}{1 + 0.086 \cdot {647.3872}^{0.87}}

Next Step Prepare to Evaluate

∴

s = \frac{0.1}{1 + 0.086 \cdot {647.3872}^{0.87}}

Next Step Evaluate

∴

s = 0.0040000001430807m

Next Step Convert to Output's Unit

∴

s = 4.0000001430807mm

LAST Step Rounding Answer

∴

s = 4mm

Transverse Shrinkage of Restrained Joint Formula Elements

Variables

Transverse Shrinkage

Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.

Symbol: s

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Transverse Shrinkage

Transverse Shrinkage of Unrestrained Joint

Transverse Shrinkage of Unrestrained Joint is shrinkage produced when there is no restriction on the joint.

Symbol: S

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Transverse Shrinkage of Unrestrained Joint

Degree of Restraint

Degree of restraint is defined as the amount of reaction stress for a unit transverse shrinkage.

Symbol: k_s

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Degree of Restraint

Other formulas in Butt Joints category

Go Transverse Shrinkage in Butt Joints

S b = (5.08 \cdot (\frac{A w}{p tb})) + (1.27 \cdot d)

Go Plate Thickness for given Transverse Shrinkage in Butt Joints

p tb = \frac{5.08 \cdot A w}{S b - (1.27 \cdot d)}

Go Cross-sectional area of weld for given transverse shrinkage in butt joints

A w = \frac{p tb \cdot (S b - 1.27 \cdot d)}{5.08}

Go Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint

S t = S 0 + b \cdot (\log 10 (\frac{w}{w 0}))

How to Evaluate Transverse Shrinkage of Restrained Joint?

Transverse Shrinkage of Restrained Joint evaluator uses Transverse Shrinkage = Transverse Shrinkage of Unrestrained Joint/(1+0.086*Degree of Restraint^0.87) to evaluate the Transverse Shrinkage, The Transverse Shrinkage of Restrained Joint formula is defined as the decrease in width of weld due to contraction when plates are restrained. Transverse Shrinkage is denoted by s symbol.

How to evaluate Transverse Shrinkage of Restrained Joint using this online evaluator? To use this online evaluator for Transverse Shrinkage of Restrained Joint, enter Transverse Shrinkage of Unrestrained Joint (S) & Degree of Restraint (k_s) and hit the calculate button.

FAQs on Transverse Shrinkage of Restrained Joint

What is the formula to find Transverse Shrinkage of Restrained Joint?

The formula of Transverse Shrinkage of Restrained Joint is expressed as Transverse Shrinkage = Transverse Shrinkage of Unrestrained Joint/(1+0.086*Degree of Restraint^0.87). Here is an example- 4000 = 0.1/(1+0.086*647.3872^0.87).

How to calculate Transverse Shrinkage of Restrained Joint?

With Transverse Shrinkage of Unrestrained Joint (S) & Degree of Restraint (k_s) we can find Transverse Shrinkage of Restrained Joint using the formula - Transverse Shrinkage = Transverse Shrinkage of Unrestrained Joint/(1+0.086*Degree of Restraint^0.87).

Can the Transverse Shrinkage of Restrained Joint be negative?

No, the Transverse Shrinkage of Restrained Joint, measured in Length cannot be negative.

Which unit is used to measure Transverse Shrinkage of Restrained Joint?

Transverse Shrinkage of Restrained Joint is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Transverse Shrinkage of Restrained Joint can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!