Transverse Shrinkage in First Pass given Total Shrinkage Formula

Fx Copy
LaTeX Copy
Transverse Shrinkage in First Pass is the shrinkage occur on weld joint surface after the first welding. Check FAQs
S0=St-b(log10(ww0))
S0 - Transverse Shrinkage in First Pass?St - Total Transverse Shrinkage?b - Constant For Multi Pass Shrinkage?w - Total Weight of Weld Metal Deposited?w0 - Weld Metal Deposited in First Pass?

Transverse Shrinkage in First Pass given Total Shrinkage Example

With values
With units
Only example

Here is how the Transverse Shrinkage in First Pass given Total Shrinkage equation looks like with Values.

Here is how the Transverse Shrinkage in First Pass given Total Shrinkage equation looks like with Units.

Here is how the Transverse Shrinkage in First Pass given Total Shrinkage equation looks like.

2.2Edit=5.3Edit-0.24Edit(log10(5.1406Edit4.99Edit))
You are here -
HomeIcon Home » Category Engineering » Category Production Engineering » Category Welding » fx Transverse Shrinkage in First Pass given Total Shrinkage

Transverse Shrinkage in First Pass given Total Shrinkage Solution

Follow our step by step solution on how to calculate Transverse Shrinkage in First Pass given Total Shrinkage?

FIRST Step Consider the formula
S0=St-b(log10(ww0))
Next Step Substitute values of Variables
S0=5.3mm-0.24(log10(5.1406g4.99g))
Next Step Convert Units
S0=0.0053m-0.24(log10(0.0051kg0.005kg))
Next Step Prepare to Evaluate
S0=0.0053-0.24(log10(0.00510.005))
Next Step Evaluate
S0=0.00220000506005465m
Next Step Convert to Output's Unit
S0=2.20000506005465mm
LAST Step Rounding Answer
S0=2.2mm

Transverse Shrinkage in First Pass given Total Shrinkage Formula Elements

Variables
Functions
Transverse Shrinkage in First Pass
Transverse Shrinkage in First Pass is the shrinkage occur on weld joint surface after the first welding.
Symbol: S0
Measurement: LengthUnit: mm
Note: Value can be positive or negative.
Total Transverse Shrinkage
Total Transverse Shrinkage is the amount by which weldment shrinks due to multiple passes.
Symbol: St
Measurement: LengthUnit: mm
Note: Value should be greater than 0.
Constant For Multi Pass Shrinkage
Constant For Multi Pass Shrinkage is total transverse shrinkage due to multi-pass welding.
Symbol: b
Measurement: NAUnit: Unitless
Note: Value should be greater than 0.
Total Weight of Weld Metal Deposited
Total Weight of Weld Metal Deposited is the amount of metal deposited during welding.
Symbol: w
Measurement: WeightUnit: g
Note: Value should be greater than 0.
Weld Metal Deposited in First Pass
Weld Metal Deposited in First Pass is just metal deposited in single pass of welding.
Symbol: w0
Measurement: WeightUnit: g
Note: Value should be greater than 0.
log10
The common logarithm, also known as the base-10 logarithm or the decimal logarithm, is a mathematical function that is the inverse of the exponential function.
Syntax: log10(Number)

Other formulas in Butt Joints category

​Go Transverse Shrinkage in Butt Joints
Sb=(5.08(Awptb))+(1.27d)
​Go Plate Thickness for given Transverse Shrinkage in Butt Joints
ptb=5.08AwSb-(1.27d)
​Go Cross-sectional area of weld for given transverse shrinkage in butt joints
Aw=ptb(Sb-1.27d)5.08
​Go Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint
St=S0+b(log10(ww0))

How to Evaluate Transverse Shrinkage in First Pass given Total Shrinkage?

Transverse Shrinkage in First Pass given Total Shrinkage evaluator uses Transverse Shrinkage in First Pass = Total Transverse Shrinkage-Constant For Multi Pass Shrinkage*(log10(Total Weight of Weld Metal Deposited/Weld Metal Deposited in First Pass)) to evaluate the Transverse Shrinkage in First Pass, The Transverse Shrinkage in First Pass given Total Shrinkage formula is defined as the shrinkage occurring perpendicular to the weld line. Transverse Shrinkage in First Pass is denoted by S0 symbol.

How to evaluate Transverse Shrinkage in First Pass given Total Shrinkage using this online evaluator? To use this online evaluator for Transverse Shrinkage in First Pass given Total Shrinkage, enter Total Transverse Shrinkage (St), Constant For Multi Pass Shrinkage (b), Total Weight of Weld Metal Deposited (w) & Weld Metal Deposited in First Pass (w0) and hit the calculate button.

FAQs on Transverse Shrinkage in First Pass given Total Shrinkage

What is the formula to find Transverse Shrinkage in First Pass given Total Shrinkage?
The formula of Transverse Shrinkage in First Pass given Total Shrinkage is expressed as Transverse Shrinkage in First Pass = Total Transverse Shrinkage-Constant For Multi Pass Shrinkage*(log10(Total Weight of Weld Metal Deposited/Weld Metal Deposited in First Pass)). Here is an example- 2010.396 = 0.0053-0.24*(log10(0.00514064/0.00499)).
How to calculate Transverse Shrinkage in First Pass given Total Shrinkage?
With Total Transverse Shrinkage (St), Constant For Multi Pass Shrinkage (b), Total Weight of Weld Metal Deposited (w) & Weld Metal Deposited in First Pass (w0) we can find Transverse Shrinkage in First Pass given Total Shrinkage using the formula - Transverse Shrinkage in First Pass = Total Transverse Shrinkage-Constant For Multi Pass Shrinkage*(log10(Total Weight of Weld Metal Deposited/Weld Metal Deposited in First Pass)). This formula also uses Common Logarithm (log10) function(s).
Can the Transverse Shrinkage in First Pass given Total Shrinkage be negative?
Yes, the Transverse Shrinkage in First Pass given Total Shrinkage, measured in Length can be negative.
Which unit is used to measure Transverse Shrinkage in First Pass given Total Shrinkage?
Transverse Shrinkage in First Pass given Total Shrinkage is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Transverse Shrinkage in First Pass given Total Shrinkage can be measured.
Copied!