FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Transverse Shrinkage in Butt Joints Formula

Fx Copy

LaTeX Copy

Transverse Shrinkage of Butt Joint is a shrinkage of the metal result of contraction of the base metal after the metal pieces are welded face to face at the thinner end. Check FAQs

S b = (5.08 \cdot (\frac{A w}{p tb})) + (1.27 \cdot d)

S_b - Transverse Shrinkage of Butt Joint?A_w - Cross Sectional Area of Weld?p_tb - Plate Thickness in Butt Joint?d - Root Opening?

Transverse Shrinkage in Butt Joints Example

With values

With units

Only example

Here is how the Transverse Shrinkage in Butt Joints equation looks like with Values.

Here is how the Transverse Shrinkage in Butt Joints equation looks like with Units.

Here is how the Transverse Shrinkage in Butt Joints equation looks like.

0.365 = (5.08 \cdot (\frac{5.5}{802.87})) + (1.27 \cdot 0.26)

0.365mm = (5.08 \cdot (\frac{5.5mm²}{802.87mm})) + (1.27 \cdot 0.26mm)

0.365 = (5.08 \cdot (\frac{5.5}{802.87})) + (1.27 \cdot 0.26)

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Welding » fx Transverse Shrinkage in Butt Joints

Transverse Shrinkage in Butt Joints Solution

Follow our step by step solution on how to calculate Transverse Shrinkage in Butt Joints?

FIRST Step Consider the formula

S b = (5.08 \cdot (\frac{A w}{p tb})) + (1.27 \cdot d)

Next Step Substitute values of Variables

∴

S b = (5.08 \cdot (\frac{5.5mm²}{802.87mm})) + (1.27 \cdot 0.26mm)

Next Step Convert Units

∴

S b = (5.08 \cdot (\frac{5.5E-6m²}{0.8029m})) + (1.27 \cdot 0.0003m)

Next Step Prepare to Evaluate

∴

S b = (5.08 \cdot (\frac{5.5E-6}{0.8029})) + (1.27 \cdot 0.0003)

Next Step Evaluate

∴

S b = 0.000365000154445925m

Next Step Convert to Output's Unit

∴

S b = 0.365000154445925mm

LAST Step Rounding Answer

∴

S b = 0.365mm

Transverse Shrinkage in Butt Joints Formula Elements

Variables

Transverse Shrinkage of Butt Joint

Transverse Shrinkage of Butt Joint is a shrinkage of the metal result of contraction of the base metal after the metal pieces are welded face to face at the thinner end.

Symbol: S_b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Transverse Shrinkage of Butt Joint

Cross Sectional Area of Weld

Cross Sectional Area of Weld is the area of region where welding is being done.

Symbol: A_w

Measurement: AreaUnit: mm²

Note: Value should be greater than 0.

Formulas to find Cross Sectional Area of Weld

Plate Thickness in Butt Joint

Plate Thickness in Butt Joint is the distance through the bearing plate that are welded face to face at the thinner end.

Symbol: p_tb

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Plate Thickness in Butt Joint

Root Opening

Root Opening is defined as the point at which the two pieces to be joined by welding is nearest.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Root Opening

Other formulas in Butt Joints category

Go Plate Thickness for given Transverse Shrinkage in Butt Joints

p tb = \frac{5.08 \cdot A w}{S b - (1.27 \cdot d)}

Go Cross-sectional area of weld for given transverse shrinkage in butt joints

A w = \frac{p tb \cdot (S b - 1.27 \cdot d)}{5.08}

Go Total Transverse Shrinkage during Multi-Pass Welding of Butt Joint

S t = S 0 + b \cdot (\log 10 (\frac{w}{w 0}))

Go Transverse Shrinkage of Restrained Joint

s = \frac{S}{1 + 0.086 \cdot {k s}^{0.87}}

How to Evaluate Transverse Shrinkage in Butt Joints?

Transverse Shrinkage in Butt Joints evaluator uses Transverse Shrinkage of Butt Joint = (5.08*(Cross Sectional Area of Weld/Plate Thickness in Butt Joint))+(1.27*Root Opening) to evaluate the Transverse Shrinkage of Butt Joint, The Transverse Shrinkage in Butt Joints formula is defined as the result of contraction of the base metal, which was expanded during welding. Transverse Shrinkage of Butt Joint is denoted by S_b symbol.

How to evaluate Transverse Shrinkage in Butt Joints using this online evaluator? To use this online evaluator for Transverse Shrinkage in Butt Joints, enter Cross Sectional Area of Weld (A_w), Plate Thickness in Butt Joint (p_tb) & Root Opening (d) and hit the calculate button.

FAQs on Transverse Shrinkage in Butt Joints

What is the formula to find Transverse Shrinkage in Butt Joints?

The formula of Transverse Shrinkage in Butt Joints is expressed as Transverse Shrinkage of Butt Joint = (5.08*(Cross Sectional Area of Weld/Plate Thickness in Butt Joint))+(1.27*Root Opening). Here is an example- 365.0002 = (5.08*(5.5E-06/0.80287))+(1.27*0.00026).

How to calculate Transverse Shrinkage in Butt Joints?

With Cross Sectional Area of Weld (A_w), Plate Thickness in Butt Joint (p_tb) & Root Opening (d) we can find Transverse Shrinkage in Butt Joints using the formula - Transverse Shrinkage of Butt Joint = (5.08*(Cross Sectional Area of Weld/Plate Thickness in Butt Joint))+(1.27*Root Opening).

Can the Transverse Shrinkage in Butt Joints be negative?

No, the Transverse Shrinkage in Butt Joints, measured in Length cannot be negative.

Which unit is used to measure Transverse Shrinkage in Butt Joints?

Transverse Shrinkage in Butt Joints is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Transverse Shrinkage in Butt Joints can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Transverse Shrinkage in Butt Joints Formula

Transverse Shrinkage in Butt Joints Example

Transverse Shrinkage in Butt Joints Solution

Transverse Shrinkage in Butt Joints Formula Elements

Other formulas in Butt Joints category

How to Evaluate Transverse Shrinkage in Butt Joints?

FAQs on Transverse Shrinkage in Butt Joints

Variable Name