FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Total Power Accepted by Fiber Formula

Fx Copy

LaTeX Copy

Total Power Accepted by Fiber refers to the amount of optical power that successfully travels from the emitting fiber to the receiving fiber. Check FAQs

P to = P o \cdot (1 - \frac{8 \cdot d ax}{3 \cdot π \cdot r core})

P_to - Total Power Accepted by Fiber?P_o - Incident Power?d_ax - Axial Displacement?r_core - Radius of Core?π - Archimedes' constant?

Total Power Accepted by Fiber Example

With values

With units

Only example

Here is how the Total Power Accepted by Fiber equation looks like with Values.

Here is how the Total Power Accepted by Fiber equation looks like with Units.

Here is how the Total Power Accepted by Fiber equation looks like.

1.5192 = 1.75 \cdot (1 - \frac{8 \cdot 2.02}{3 \cdot 3.1416 \cdot 13})

1.5192µW = 1.75µW \cdot (1 - \frac{8 \cdot 2.02μm}{3 \cdot 3.1416 \cdot 13μm})

1.5192 = 1.75 \cdot (1 - \frac{8 \cdot 2.02}{3 \cdot 3.1416 \cdot 13})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Electronics » Category

Fiber Optic Transmission » fx Total Power Accepted by Fiber

Total Power Accepted by Fiber Solution

Follow our step by step solution on how to calculate Total Power Accepted by Fiber?

FIRST Step Consider the formula

P to = P o \cdot (1 - \frac{8 \cdot d ax}{3 \cdot π \cdot r core})

Next Step Substitute values of Variables

∴

P to = 1.75µW \cdot (1 - \frac{8 \cdot 2.02μm}{3 \cdot π \cdot 13μm})

Next Step Substitute values of Constants

∴

P to = 1.75µW \cdot (1 - \frac{8 \cdot 2.02μm}{3 \cdot 3.1416 \cdot 13μm})

Next Step Convert Units

∴

P to = 1.8E-6W \cdot (1 - \frac{8 \cdot 2E-6m}{3 \cdot 3.1416 \cdot 1.3E-5m})

Next Step Prepare to Evaluate

∴

P to = 1.8E-6 \cdot (1 - \frac{8 \cdot 2E-6}{3 \cdot 3.1416 \cdot 1.3E-5})

Next Step Evaluate

∴

P to = 1.51918452355698E-06W

Next Step Convert to Output's Unit

∴

P to = 1.51918452355698µW

LAST Step Rounding Answer

∴

P to = 1.5192µW

Total Power Accepted by Fiber Formula Elements

Variables

Constants

Total Power Accepted by Fiber

Total Power Accepted by Fiber refers to the amount of optical power that successfully travels from the emitting fiber to the receiving fiber.

Symbol: P_to

Measurement: PowerUnit: µW

Note: Value should be greater than 0.

Formulas to find Total Power Accepted by Fiber

Incident Power

Incident Power w.r.t optics is the amount of optical power (light energy) incident on the photodetector.

Symbol: P_o

Measurement: PowerUnit: µW

Note: Value should be greater than 0.

Formulas to find Incident Power

Axial Displacement

Axial Displacement represents the axial misalignment between the two fibers. It’s the distance by which one fiber is offset from the other along the axis of the fiber.

Symbol: d_ax

Measurement: LengthUnit: μm

Note: Value should be greater than 0.

Formulas to find Axial Displacement

Radius of Core

Radius of Core is the length measured from the center of the core to the core-cladding interface.

Symbol: r_core

Measurement: LengthUnit: μm

Note: Value should be greater than 0.

Formulas to find Radius of Core

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

Other formulas in Optical Detectors category

Go Quantum Efficiency of Photodetector

η = \frac{N e}{N p}

Go Incident Photon Rate

R i = \frac{P i}{[hP] \cdot F i}

Go Electron Rate in Detector

R p = η \cdot R i

Go Long Wavelength Cutoff Point

λ c = [hP] \cdot \frac{[c]}{E g}

How to Evaluate Total Power Accepted by Fiber?

Total Power Accepted by Fiber evaluator uses Total Power Accepted by Fiber = Incident Power*(1-(8*Axial Displacement)/(3*pi*Radius of Core)) to evaluate the Total Power Accepted by Fiber, Total Power Accepted by Fiber refers to the amount of optical power that successfully travels from the emitting fiber (the fiber sending the light) to the receiving fiber (the fiber receiving the light). This power is influenced by factors such as the alignment of the fibers and the gap between them. If there is a misalignment or a gap, some of the light may not enter the receiving fiber, resulting in a loss of power. Total Power Accepted by Fiber is denoted by P_to symbol.

How to evaluate Total Power Accepted by Fiber using this online evaluator? To use this online evaluator for Total Power Accepted by Fiber, enter Incident Power (P_o), Axial Displacement (d_ax) & Radius of Core (r_core) and hit the calculate button.

FAQs on Total Power Accepted by Fiber

What is the formula to find Total Power Accepted by Fiber?

The formula of Total Power Accepted by Fiber is expressed as Total Power Accepted by Fiber = Incident Power*(1-(8*Axial Displacement)/(3*pi*Radius of Core)). Here is an example- 1.5E-6 = 1.75E-06*(1-(8*2.02E-06)/(3*pi*1.3E-05)).

How to calculate Total Power Accepted by Fiber?

With Incident Power (P_o), Axial Displacement (d_ax) & Radius of Core (r_core) we can find Total Power Accepted by Fiber using the formula - Total Power Accepted by Fiber = Incident Power*(1-(8*Axial Displacement)/(3*pi*Radius of Core)). This formula also uses Archimedes' constant .

Can the Total Power Accepted by Fiber be negative?

No, the Total Power Accepted by Fiber, measured in Power cannot be negative.

Which unit is used to measure Total Power Accepted by Fiber?

Total Power Accepted by Fiber is usually measured using the Microwatt[µW] for Power. Watt[µW], Kilowatt[µW], Milliwatt[µW] are the few other units in which Total Power Accepted by Fiber can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Total Power Accepted by Fiber Formula

Total Power Accepted by Fiber Example

Total Power Accepted by Fiber Solution

Total Power Accepted by Fiber Formula Elements

Other formulas in Optical Detectors category

How to Evaluate Total Power Accepted by Fiber?

FAQs on Total Power Accepted by Fiber

Variable Name