FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Total Load Carried by Plates in Compound Weld Formula

GoLoad Carried by Single Fillet Lap Weld Formula

GoLoad Carried by Parallel Fillet Weld Formula

Fx Copy

LaTeX Copy

Load on weld is the instantaneous load applied perpendicular to the specimen cross section. Check FAQs

W = 1.414 \cdot 𝜏 \cdot L parallel \cdot t plate + 0.707 \cdot σ t \cdot L single \cdot t plate

W - Load on weld?𝜏 - Shear Stress?L_parallel - Length of Parallel Fillet Weld?t_plate - Thickness of Plate?σ_t - Tensile Stress?L_single - Length of Single Fillet Lap Weld?

Total Load Carried by Plates in Compound Weld Example

With values

With units

Only example

Here is how the Total Load Carried by Plates in Compound Weld equation looks like with Values.

Here is how the Total Load Carried by Plates in Compound Weld equation looks like with Units.

Here is how the Total Load Carried by Plates in Compound Weld equation looks like.

8.5519 = 1.414 \cdot 2.4 \cdot 200 \cdot 12 + 0.707 \cdot 32 \cdot 1.5 \cdot 12

8.5519kN = 1.414 \cdot 2.4MPa \cdot 200mm \cdot 12mm + 0.707 \cdot 32MPa \cdot 1.5mm \cdot 12mm

8.5519 = 1.414 \cdot 2.4 \cdot 200 \cdot 12 + 0.707 \cdot 32 \cdot 1.5 \cdot 12

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Total Load Carried by Plates in Compound Weld

Total Load Carried by Plates in Compound Weld Solution

Follow our step by step solution on how to calculate Total Load Carried by Plates in Compound Weld?

FIRST Step Consider the formula

W = 1.414 \cdot 𝜏 \cdot L parallel \cdot t plate + 0.707 \cdot σ t \cdot L single \cdot t plate

Next Step Substitute values of Variables

∴

W = 1.414 \cdot 2.4MPa \cdot 200mm \cdot 12mm + 0.707 \cdot 32MPa \cdot 1.5mm \cdot 12mm

Next Step Convert Units

∴

W = 1.414 \cdot 2.4E+6Pa \cdot 0.2m \cdot 0.012m + 0.707 \cdot 3.2E+7Pa \cdot 0.0015m \cdot 0.012m

Next Step Prepare to Evaluate

∴

W = 1.414 \cdot 2.4E+6 \cdot 0.2 \cdot 0.012 + 0.707 \cdot 3.2E+7 \cdot 0.0015 \cdot 0.012

Next Step Evaluate

∴

W = 8551.872N

Next Step Convert to Output's Unit

∴

W = 8.551872kN

LAST Step Rounding Answer

∴

W = 8.5519kN

Total Load Carried by Plates in Compound Weld Formula Elements

Variables

Load on weld

Load on weld is the instantaneous load applied perpendicular to the specimen cross section.

Symbol: W

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Load on weld

Shear Stress

Shear Stress is force tending to cause deformation of a material by slippage along a plane or planes parallel to the imposed stress.

Symbol: 𝜏

Measurement: StressUnit: MPa

Note: Value should be greater than 0.

Formulas to find Shear Stress

Length of Parallel Fillet Weld

Length of Parallel Fillet Weld is the distance between two consecutive end of welds.

Symbol: L_parallel

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Parallel Fillet Weld

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Tensile Stress

Tensile Stress can be defined as the magnitude of force applied along the weld, which is divided by the cross-sectional area of the weld in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Length of Single Fillet Lap Weld

The Length of Single Fillet Lap Weld is the distance between two consecutive ends of welds.

Symbol: L_single

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Single Fillet Lap Weld

Other Formulas to find Load on weld

Go Load Carried by Single Fillet Lap Weld

W = 0.707 \cdot σ t \cdot L single \cdot t plate

Go Load Carried by Parallel Fillet Weld

W = 1.414 \cdot 𝜏 \cdot L parallel \cdot t plate

Other formulas in Analysis of Compound Weld category

Go Allowable Tensile Stress given Load Carried by Single Fillet Lap Weld

σ t = \frac{W}{0.707 \cdot L single \cdot t plate}

Go Length of Single Fillet Lap Weld given Load Carried by Single Fillet Lap Weld

L single = \frac{W}{0.707 \cdot σ t \cdot t plate}

Go Thickness of Plates given Load Carried by Single Fillet Lap Weld

t plate = \frac{W}{0.707 \cdot σ t \cdot L single}

Go Length of Parallel Fillet Weld given Load Carried by Parallel Fillet Weld

L parallel = \frac{W}{1.414 \cdot 𝜏 \cdot t plate}

How to Evaluate Total Load Carried by Plates in Compound Weld?

Total Load Carried by Plates in Compound Weld evaluator uses Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate+0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate to evaluate the Load on weld, The Total load carried by plates in compound weld formula is defined as the pressure or force created on the weld. Load on weld is denoted by W symbol.

How to evaluate Total Load Carried by Plates in Compound Weld using this online evaluator? To use this online evaluator for Total Load Carried by Plates in Compound Weld, enter Shear Stress (𝜏), Length of Parallel Fillet Weld (L_parallel), Thickness of Plate (t_plate), Tensile Stress (σ_t) & Length of Single Fillet Lap Weld (L_single) and hit the calculate button.

FAQs on Total Load Carried by Plates in Compound Weld

What is the formula to find Total Load Carried by Plates in Compound Weld?

The formula of Total Load Carried by Plates in Compound Weld is expressed as Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate+0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate. Here is an example- 0.008552 = 1.414*2400000*0.2*0.012+0.707*32000000*0.0015*0.012.

How to calculate Total Load Carried by Plates in Compound Weld?

With Shear Stress (𝜏), Length of Parallel Fillet Weld (L_parallel), Thickness of Plate (t_plate), Tensile Stress (σ_t) & Length of Single Fillet Lap Weld (L_single) we can find Total Load Carried by Plates in Compound Weld using the formula - Load on weld = 1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate+0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate.

What are the other ways to Calculate Load on weld?

Here are the different ways to Calculate Load on weld-

Load on weld=0.707*Tensile Stress*Length of Single Fillet Lap Weld*Thickness of Plate
Load on weld=1.414*Shear Stress*Length of Parallel Fillet Weld*Thickness of Plate

Can the Total Load Carried by Plates in Compound Weld be negative?

No, the Total Load Carried by Plates in Compound Weld, measured in Force cannot be negative.

Which unit is used to measure Total Load Carried by Plates in Compound Weld?

Total Load Carried by Plates in Compound Weld is usually measured using the Kilonewton[kN] for Force. Newton[kN], Exanewton[kN], Meganewton[kN] are the few other units in which Total Load Carried by Plates in Compound Weld can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Total Load Carried by Plates in Compound Weld Formula

​GoLoad Carried by Single Fillet Lap Weld Formula

​GoLoad Carried by Parallel Fillet Weld Formula

Total Load Carried by Plates in Compound Weld Example

Total Load Carried by Plates in Compound Weld Solution

Total Load Carried by Plates in Compound Weld Formula Elements

Other Formulas to find Load on weld

Other formulas in Analysis of Compound Weld category

How to Evaluate Total Load Carried by Plates in Compound Weld?

FAQs on Total Load Carried by Plates in Compound Weld

Variable Name

GoLoad Carried by Single Fillet Lap Weld Formula

GoLoad Carried by Parallel Fillet Weld Formula