FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Torque on Shaft of Prony Brake Dynamometer Formula

GoTorsion Equation for Torsion Dynamometer Formula

GoTorsion Equation for Torsion Dynamometer using Modulus of Rigidity Formula

Fx Copy

LaTeX Copy

Total Torque is the rotational force that causes an object to rotate, measured by a dynamometer, typically in units of newton-meters or foot-pounds. Check FAQs

T = W end \cdot L horizontal

T - Total Torque?W_end - Weight at Outer End of Lever?L_horizontal - Distance between Weight and Center of Pulley?

Torque on Shaft of Prony Brake Dynamometer Example

With values

With units

Only example

Here is how the Torque on Shaft of Prony Brake Dynamometer equation looks like with Values.

Here is how the Torque on Shaft of Prony Brake Dynamometer equation looks like with Units.

Here is how the Torque on Shaft of Prony Brake Dynamometer equation looks like.

13.0017 = 19 \cdot 0.6843

13.0017N*m = 19N \cdot 0.6843m

13.0017 = 19 \cdot 0.6843

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Theory of Machine » fx Torque on Shaft of Prony Brake Dynamometer

Torque on Shaft of Prony Brake Dynamometer Solution

Follow our step by step solution on how to calculate Torque on Shaft of Prony Brake Dynamometer?

FIRST Step Consider the formula

T = W end \cdot L horizontal

Next Step Substitute values of Variables

∴

T = 19N \cdot 0.6843m

Next Step Prepare to Evaluate

∴

T = 19 \cdot 0.6843

LAST Step Evaluate

∴

T = 13.0017N*m

Torque on Shaft of Prony Brake Dynamometer Formula Elements

Variables

Total Torque

Total Torque is the rotational force that causes an object to rotate, measured by a dynamometer, typically in units of newton-meters or foot-pounds.

Symbol: T

Measurement: TorqueUnit: N*m

Note: Value can be positive or negative.

Formulas to find Total Torque

Weight at Outer End of Lever

Weight at Outer End of Lever is the force exerted at the outer end of a lever in a dynamometer, used to measure torque or rotational force.

Symbol: W_end

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Weight at Outer End of Lever

Distance between Weight and Center of Pulley

Distance between Weight and Center of Pulley is the length between the weight attached to a dynamometer and the center of the pulley.

Symbol: L_horizontal

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Distance between Weight and Center of Pulley

Other Formulas to find Total Torque

Go Torsion Equation for Torsion Dynamometer

T = k \cdot θ

Go Torsion Equation for Torsion Dynamometer using Modulus of Rigidity

T = \frac{G \cdot θ \cdot J}{L shaft}

Go Torque on Shaft of Prony Brake Dynamometer using Radius of Pulley

T = F \cdot R

Go Torque Transmitted if Power is known for Epicyclic-Train Dynamometer

T = \frac{60 \cdot P}{2 \cdot π \cdot N}

Other formulas in Dynamometer category

Go Constant for Particular Shaft for Torsion Dynamometer

k = \frac{G \cdot J}{L shaft}

Go Distance Moved in One Revolution by Rope Brake Dynamometer

d = π \cdot (D wheel + d rope)

Go Load on Brake for Rope Brake Dynamometer

W = W dead - S

Go Tangential Effort for Epicyclic-Train Dynamometer

P t = \frac{W end \cdot L horizontal}{2 \cdot a gear}

How to Evaluate Torque on Shaft of Prony Brake Dynamometer?

Torque on Shaft of Prony Brake Dynamometer evaluator uses Total Torque = Weight at Outer End of Lever*Distance between Weight and Center of Pulley to evaluate the Total Torque, Torque on Shaft of Prony Brake Dynamometer formula is defined as the rotational force that causes the shaft to rotate, measured by the product of the end load and horizontal length of the Prony Brake Dynamometer, providing a precise measurement of the torque in an electrical or mechanical system. Total Torque is denoted by T symbol.

How to evaluate Torque on Shaft of Prony Brake Dynamometer using this online evaluator? To use this online evaluator for Torque on Shaft of Prony Brake Dynamometer, enter Weight at Outer End of Lever (W_end) & Distance between Weight and Center of Pulley (L_horizontal) and hit the calculate button.

FAQs on Torque on Shaft of Prony Brake Dynamometer

What is the formula to find Torque on Shaft of Prony Brake Dynamometer?

The formula of Torque on Shaft of Prony Brake Dynamometer is expressed as Total Torque = Weight at Outer End of Lever*Distance between Weight and Center of Pulley. Here is an example- 12.9998 = 19*0.6843.

How to calculate Torque on Shaft of Prony Brake Dynamometer?

With Weight at Outer End of Lever (W_end) & Distance between Weight and Center of Pulley (L_horizontal) we can find Torque on Shaft of Prony Brake Dynamometer using the formula - Total Torque = Weight at Outer End of Lever*Distance between Weight and Center of Pulley.

What are the other ways to Calculate Total Torque?

Here are the different ways to Calculate Total Torque-

Total Torque=Constant for a Particular Shaft*Angle of Twist
Total Torque=(Modulus of Rigidity*Angle of Twist*Polar Moment of Inertia of Shaft)/Shaft Length
Total Torque=Frictional Resistance between Block and Pulley*Radius of Pulley

Can the Torque on Shaft of Prony Brake Dynamometer be negative?

Yes, the Torque on Shaft of Prony Brake Dynamometer, measured in Torque can be negative.

Which unit is used to measure Torque on Shaft of Prony Brake Dynamometer?

Torque on Shaft of Prony Brake Dynamometer is usually measured using the Newton Meter[N*m] for Torque. Newton Centimeter[N*m], Newton Millimeter[N*m], Kilonewton Meter[N*m] are the few other units in which Torque on Shaft of Prony Brake Dynamometer can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit