FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Top Width given Wetted Area Formula

GoTop Width given Hydraulic Radius Formula

GoTop Width for Parabola Formula

Fx Copy

LaTeX Copy

Top Width is defined as the width at the top of the section. Check FAQs

T = \frac{A Para}{(\frac{2}{3}) \cdot d f}

T - Top Width?A_Para - Wetted Surface Area of Parabola?d_f - Depth of Flow?

Top Width given Wetted Area Example

With values

With units

Only example

Here is how the Top Width given Wetted Area equation looks like with Values.

Here is how the Top Width given Wetted Area equation looks like with Units.

Here is how the Top Width given Wetted Area equation looks like.

2.1 = \frac{4.62}{(\frac{2}{3}) \cdot 3.3}

2.1m = \frac{4.62m²}{(\frac{2}{3}) \cdot 3.3m}

2.1 = \frac{4.62}{(\frac{2}{3}) \cdot 3.3}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Top Width given Wetted Area

Top Width given Wetted Area Formula Elements

Variables

Top Width

Top Width is defined as the width at the top of the section.

Symbol: T

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Top Width

Wetted Surface Area of Parabola

Wetted Surface Area of Parabola [length^2] is the total area of outer surface in contact with the surrounding water.

Symbol: A_Para

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Wetted Surface Area of Parabola

Depth of Flow

Depth of Flow is the distance from the top or surface of the flow to the bottom of a channel or other waterway or Depth of Flow at the Vertical while measuring Sound Weights.

Symbol: d_f

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Depth of Flow

Other Formulas to find Top Width

Go Top Width given Hydraulic Radius

T = \sqrt{\frac{8 \cdot {(d f)}^{2} \cdot R H(Para)}{2 \cdot d f - 3 \cdot R H(Para)}}

Go Top Width for Parabola

T = 1.5 \cdot \frac{A Para}{d f}

Go Top Widths given Section Factor

T = \frac{Z Para}{0.544331054 \cdot ({d f}^{1.5})}

Other formulas in Geometrical Properties of Parabolic Channel Section category

Go Wetted Area

A Para = (\frac{2}{3}) \cdot T \cdot d f

Go Depth of Flow given Wetted Area for Parabola

d f = \frac{A Para}{(\frac{2}{3}) \cdot T}

Go Wetted Perimeter for Parabola

P Para = T + (\frac{8}{3}) \cdot d f \cdot \frac{d f}{T}

Go Hydraulic Radius given Width

R H(Para) = \frac{2 \cdot {(T)}^{2} \cdot d f}{3 \cdot {(T)}^{2} + 8 \cdot {(d f)}^{2}}

How to Evaluate Top Width given Wetted Area?

Top Width given Wetted Area evaluator uses Top Width = Wetted Surface Area of Parabola/((2/3)*Depth of Flow) to evaluate the Top Width, The Top Width given Wetted Area is defined as the top length in the channel measured in the perpendicular direction of flow. Top Width is denoted by T symbol.

How to evaluate Top Width given Wetted Area using this online evaluator? To use this online evaluator for Top Width given Wetted Area, enter Wetted Surface Area of Parabola (A_Para) & Depth of Flow (d_f) and hit the calculate button.

FAQs on Top Width given Wetted Area

What is the formula to find Top Width given Wetted Area?

The formula of Top Width given Wetted Area is expressed as Top Width = Wetted Surface Area of Parabola/((2/3)*Depth of Flow). Here is an example- 1.33 = 4.62/((2/3)*3.3).

How to calculate Top Width given Wetted Area?

With Wetted Surface Area of Parabola (A_Para) & Depth of Flow (d_f) we can find Top Width given Wetted Area using the formula - Top Width = Wetted Surface Area of Parabola/((2/3)*Depth of Flow).

What are the other ways to Calculate Top Width?

Here are the different ways to Calculate Top Width-

Top Width=sqrt((8*(Depth of Flow)^2*Hydraulic Radius of Parabola)/(2*Depth of Flow-3*Hydraulic Radius of Parabola))
Top Width=1.5*Wetted Surface Area of Parabola/Depth of Flow
Top Width=Section Factor of Parabola/(0.544331054*(Depth of Flow^1.5))

Can the Top Width given Wetted Area be negative?

No, the Top Width given Wetted Area, measured in Length cannot be negative.

Which unit is used to measure Top Width given Wetted Area?

Top Width given Wetted Area is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Top Width given Wetted Area can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Top Width given Wetted Area Formula

​GoTop Width given Hydraulic Radius Formula

​GoTop Width for Parabola Formula

Top Width given Wetted Area Example

Top Width given Wetted Area Solution

Top Width given Wetted Area Formula Elements

Other Formulas to find Top Width

Other formulas in Geometrical Properties of Parabolic Channel Section category

How to Evaluate Top Width given Wetted Area?

FAQs on Top Width given Wetted Area

Variable Name

GoTop Width given Hydraulic Radius Formula

GoTop Width for Parabola Formula