FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Top Width for Circle Formula

Fx Copy

LaTeX Copy

Top Width of Circular Channel is defined as width at top of section. Check FAQs

T cir = d section \cdot \sin (\frac{θ Angle}{2})

T_cir - Top Width of Circular Channel?d_section - Diameter of Section?θ_Angle - Subtended Angle in Radians?

Top Width for Circle Example

With values

With units

Only example

Here is how the Top Width for Circle equation looks like with Values.

Here is how the Top Width for Circle equation looks like with Units.

Here is how the Top Width for Circle equation looks like.

0.137 = 5 \cdot \sin (\frac{3.14}{2})

0.137m = 5m \cdot \sin (\frac{3.14°}{2})

0.137 = 5 \cdot \sin (\frac{3.14}{2})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Hydraulics and Waterworks » fx Top Width for Circle

Top Width for Circle Formula Elements

Variables

Functions

Top Width of Circular Channel

Top Width of Circular Channel is defined as width at top of section.

Symbol: T_cir

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Top Width of Circular Channel

Diameter of Section

The Diameter of Section refers to the length of the segment that passes through the center of the circle and touches two points on the edge of the circle.

Symbol: d_section

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Diameter of Section

Subtended Angle in Radians

Subtended Angle in Radians is the angle made by something from a given viewpoint.

Symbol: θ_Angle

Measurement: AngleUnit: °

Note: Value should be greater than 0.

Formulas to find Subtended Angle in Radians

sin

Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse.

Syntax: sin(Angle)

Other formulas in Geometrical Properties of Circular Channel Section category

Go Wetted Area for Circle

A w(cir) = (\frac{1}{8}) \cdot ((\frac{180}{π}) \cdot θ Angle - \sin (θ Angle) \cdot ({d section}^{2}))

Go Diameter of Section given Wetted Area

d section = \sqrt{\frac{(\frac{180}{π}) \cdot (θ Angle) - (8 \cdot A w(cir))}{\sin (θ Angle)}}

Go Diameter of Section given Wetted Perimeter

d section = \frac{p}{0.5 \cdot θ Angle \cdot (\frac{180}{π})}

Go Angle of Sector given Wetted Perimeter

θ Angle = \frac{p}{0.5 \cdot d section} \cdot (\frac{π}{180})

How to Evaluate Top Width for Circle?

Top Width for Circle evaluator uses Top Width of Circular Channel = Diameter of Section*sin(Subtended Angle in Radians/2) to evaluate the Top Width of Circular Channel, The Top Width for Circle formula is defined as sector length measured along the diametrical axis of the channel in flow. Top Width of Circular Channel is denoted by T_cir symbol.

How to evaluate Top Width for Circle using this online evaluator? To use this online evaluator for Top Width for Circle, enter Diameter of Section (d_section) & Subtended Angle in Radians (θ_Angle) and hit the calculate button.

FAQs on Top Width for Circle

What is the formula to find Top Width for Circle?

The formula of Top Width for Circle is expressed as Top Width of Circular Channel = Diameter of Section*sin(Subtended Angle in Radians/2). Here is an example- 0.136991 = 5*sin(0.0548033385126116/2).

How to calculate Top Width for Circle?

With Diameter of Section (d_section) & Subtended Angle in Radians (θ_Angle) we can find Top Width for Circle using the formula - Top Width of Circular Channel = Diameter of Section*sin(Subtended Angle in Radians/2). This formula also uses Sine (sin) function(s).

Can the Top Width for Circle be negative?

No, the Top Width for Circle, measured in Length cannot be negative.

Which unit is used to measure Top Width for Circle?

Top Width for Circle is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Top Width for Circle can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Top Width for Circle Formula

Top Width for Circle Example

Top Width for Circle Solution

Top Width for Circle Formula Elements

Other formulas in Geometrical Properties of Circular Channel Section category

How to Evaluate Top Width for Circle?

FAQs on Top Width for Circle

Variable Name