FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thrust on connecting rod due to force on piston head Formula

GoForce on connecting rod given radial component of force at crankpin Formula

GoForce on connecting rod given tangential component of force at crankpin Formula

Fx Copy

LaTeX Copy

Force on Connecting Rod is the force acting on the connecting rod of an IC Engine during operation. Check FAQs

P cr = \frac{P}{\cos (φ)}

P_cr - Force on Connecting Rod?P - Force on Piston Head?φ - Inclination of Connecting Rod With Line of Stroke?

Thrust on connecting rod due to force on piston head Example

With values

With units

Only example

Here is how the Thrust on connecting rod due to force on piston head equation looks like with Values.

Here is how the Thrust on connecting rod due to force on piston head equation looks like with Units.

Here is how the Thrust on connecting rod due to force on piston head equation looks like.

19864.54 = \frac{19133.35}{\cos (15.5939)}

19864.54N = \frac{19133.35N}{\cos (15.5939°)}

19864.54 = \frac{19133.35}{\cos (15.5939)}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

IC Engine » fx Thrust on connecting rod due to force on piston head

Thrust on connecting rod due to force on piston head Solution

Follow our step by step solution on how to calculate Thrust on connecting rod due to force on piston head?

FIRST Step Consider the formula

P cr = \frac{P}{\cos (φ)}

Next Step Substitute values of Variables

∴

P cr = \frac{19133.35N}{\cos (15.5939°)}

Next Step Convert Units

∴

P cr = \frac{19133.35N}{\cos (0.2722rad)}

Next Step Prepare to Evaluate

∴

P cr = \frac{19133.35}{\cos (0.2722)}

Next Step Evaluate

∴

P cr = 19864.5400422021N

LAST Step Rounding Answer

∴

P cr = 19864.54N

Thrust on connecting rod due to force on piston head Formula Elements

Variables

Functions

Force on Connecting Rod

Force on Connecting Rod is the force acting on the connecting rod of an IC Engine during operation.

Symbol: P_cr

Measurement: ForceUnit: N

Note: Value can be positive or negative.

Formulas to find Force on Connecting Rod

Force on Piston Head

Force on Piston Head is the force due to the combustion of gases onto the top of a piston head.

Symbol: P

Measurement: ForceUnit: N

Note: Value can be positive or negative.

Formulas to find Force on Piston Head

Inclination of Connecting Rod With Line of Stroke

Inclination of Connecting Rod With Line of Stroke is the angle of inclination of the connecting rod with the line of stroke of the piston.

Symbol: φ

Measurement: AngleUnit: °

Note: Value should be greater than 0.

Formulas to find Inclination of Connecting Rod With Line of Stroke

cos

Cosine of an angle is the ratio of the side adjacent to the angle to the hypotenuse of the triangle.

Syntax: cos(Angle)

Other Formulas to find Force on Connecting Rod

Go Force on connecting rod given radial component of force at crankpin

P cr = \frac{P r}{\cos (φ + θ)}

Go Force on connecting rod given tangential component of force at crankpin

P cr = \frac{P t}{\sin (φ + θ)}

Other formulas in Force on Crank Pin at Angle of Maximum Torque category

Go Angle between connecting rod and line of dead centres

φ = a \sin (\frac{\sin (θ)}{n})

Go Angle between crank and line of dead centres

θ = a \sin (n \cdot \sin (φ))

Go Force acting on piston top due to gas pressure given thrust force on connecting rod

P = P cr \cdot \cos (φ)

Go Tangential component of force at crank pin given force on connecting rod

P t = P cr \cdot \sin (φ + θ)

How to Evaluate Thrust on connecting rod due to force on piston head?

Thrust on connecting rod due to force on piston head evaluator uses Force on Connecting Rod = Force on Piston Head/cos(Inclination of Connecting Rod With Line of Stroke) to evaluate the Force on Connecting Rod, Thrust on connecting rod due to force on piston head is the thrust force onto the connecting rod transmitted from the piston to the connecting rod. The piston head is subjected to the force exerted by the gas pressure. Force on Connecting Rod is denoted by P_cr symbol.

How to evaluate Thrust on connecting rod due to force on piston head using this online evaluator? To use this online evaluator for Thrust on connecting rod due to force on piston head, enter Force on Piston Head (P) & Inclination of Connecting Rod With Line of Stroke (φ) and hit the calculate button.

FAQs on Thrust on connecting rod due to force on piston head

What is the formula to find Thrust on connecting rod due to force on piston head?

The formula of Thrust on connecting rod due to force on piston head is expressed as Force on Connecting Rod = Force on Piston Head/cos(Inclination of Connecting Rod With Line of Stroke). Here is an example- 19800 = 19133.35/cos(0.272164898226693).

How to calculate Thrust on connecting rod due to force on piston head?

With Force on Piston Head (P) & Inclination of Connecting Rod With Line of Stroke (φ) we can find Thrust on connecting rod due to force on piston head using the formula - Force on Connecting Rod = Force on Piston Head/cos(Inclination of Connecting Rod With Line of Stroke). This formula also uses Cosine (cos) function(s).

What are the other ways to Calculate Force on Connecting Rod?

Here are the different ways to Calculate Force on Connecting Rod-

Force on Connecting Rod=(Radial Force at Crank Pin)/(cos(Inclination of Connecting Rod With Line of Stroke+Crank Angle))
Force on Connecting Rod=(Tangential Force at Crank Pin)/(sin(Inclination of Connecting Rod With Line of Stroke+Crank Angle))

Can the Thrust on connecting rod due to force on piston head be negative?

Yes, the Thrust on connecting rod due to force on piston head, measured in Force can be negative.

Which unit is used to measure Thrust on connecting rod due to force on piston head?

Thrust on connecting rod due to force on piston head is usually measured using the Newton[N] for Force. Exanewton[N], Meganewton[N], Kilonewton[N] are the few other units in which Thrust on connecting rod due to force on piston head can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit