FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Skirt in Vessel Formula

Fx Copy

LaTeX Copy

Thickness of Skirt in Vessel is typically determined by calculating the maximum stress that the skirt is likely to experience and their must be sufficient to resist the weight of the vessel. Check FAQs

t skirt = \frac{4 \cdot M w}{π \cdot {(D sk)}^{2} \cdot f wb}

t_skirt - Thickness of Skirt in Vessel?M_w - Maximum Wind Moment?D_sk - Mean Diameter of Skirt?f_wb - Axial Bending Stress at Base of Vessel?π - Archimedes' constant?

Thickness of Skirt in Vessel Example

With values

With units

Only example

Here is how the Thickness of Skirt in Vessel equation looks like with Values.

Here is how the Thickness of Skirt in Vessel equation looks like with Units.

Here is how the Thickness of Skirt in Vessel equation looks like.

1.18 = \frac{4 \cdot 3.7E+8}{3.1416 \cdot {(19893.55)}^{2} \cdot 1.01}

1.18mm = \frac{4 \cdot 3.7E+8N*mm}{3.1416 \cdot {(19893.55mm)}^{2} \cdot 1.01N/mm²}

1.18 = \frac{4 \cdot 3.7E+8}{3.1416 \cdot {(19893.55)}^{2} \cdot 1.01}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Thickness of Skirt in Vessel

Thickness of Skirt in Vessel Solution

Follow our step by step solution on how to calculate Thickness of Skirt in Vessel?

FIRST Step Consider the formula

t skirt = \frac{4 \cdot M w}{π \cdot {(D sk)}^{2} \cdot f wb}

Next Step Substitute values of Variables

∴

t skirt = \frac{4 \cdot 3.7E+8N*mm}{π \cdot {(19893.55mm)}^{2} \cdot 1.01N/mm²}

Next Step Substitute values of Constants

∴

t skirt = \frac{4 \cdot 3.7E+8N*mm}{3.1416 \cdot {(19893.55mm)}^{2} \cdot 1.01N/mm²}

Next Step Convert Units

∴

t skirt = \frac{4 \cdot 370440N*m}{3.1416 \cdot {(19.8936m)}^{2} \cdot 1E+6Pa}

Next Step Prepare to Evaluate

∴

t skirt = \frac{4 \cdot 370440}{3.1416 \cdot {(19.8936)}^{2} \cdot 1E+6}

Next Step Evaluate

∴

t skirt = 0.00118000009093532m

Next Step Convert to Output's Unit

∴

t skirt = 1.18000009093532mm

LAST Step Rounding Answer

∴

t skirt = 1.18mm

Thickness of Skirt in Vessel Formula Elements

Variables

Constants

Thickness of Skirt in Vessel

Thickness of Skirt in Vessel is typically determined by calculating the maximum stress that the skirt is likely to experience and their must be sufficient to resist the weight of the vessel.

Symbol: t_skirt

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Skirt in Vessel

Maximum Wind Moment

Maximum Wind Moment is calculated based on a number of factors, including the wind speed and direction, the size and shape of the building or structure, the materials used in construction.

Symbol: M_w

Measurement: Moment of ForceUnit: N*mm

Note: Value should be greater than 0.

Formulas to find Maximum Wind Moment

Mean Diameter of Skirt

Mean Diameter of Skirt in a vessel will depend on the size and design of the vessel.

Symbol: D_sk

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Mean Diameter of Skirt

Axial Bending Stress at Base of Vessel

Axial Bending Stress at Base of Vessel refers to the stress that occurs when wind exerts a force on the vessel, causing it to bend or deform.

Symbol: f_wb

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Axial Bending Stress at Base of Vessel

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

Other formulas in Design Thickness of Skirt category

Go Wind Load acting on Lower Part of Vessel

P lw = k 1 \cdot k coefficient \cdot p 1 \cdot h 1 \cdot D o

Go Wind Load acting on Upper Part of Vessel

P uw = k 1 \cdot k coefficient \cdot p 2 \cdot h 2 \cdot D o

Go Axial Bending Stress due to Wind Load at Base of Vessel

f wb = \frac{4 \cdot M w}{π \cdot {(D sk)}^{2} \cdot t sk}

Go Maximum Bending Stress in Base Ring Plate

f max = \frac{6 \cdot M max}{b \cdot {t b}^{2}}

How to Evaluate Thickness of Skirt in Vessel?

Thickness of Skirt in Vessel evaluator uses Thickness of Skirt in Vessel = (4*Maximum Wind Moment)/(pi*(Mean Diameter of Skirt)^(2)*Axial Bending Stress at Base of Vessel) to evaluate the Thickness of Skirt in Vessel, The Thickness of Skirt in Vessel formula depends on various factors such as the diameter of the vessel, the height of the skirt, the load on the vessel, and the material used for the skirt. Thickness of Skirt in Vessel is denoted by t_skirt symbol.

How to evaluate Thickness of Skirt in Vessel using this online evaluator? To use this online evaluator for Thickness of Skirt in Vessel, enter Maximum Wind Moment (M_w), Mean Diameter of Skirt (D_sk) & Axial Bending Stress at Base of Vessel (f_wb) and hit the calculate button.

FAQs on Thickness of Skirt in Vessel

What is the formula to find Thickness of Skirt in Vessel?

The formula of Thickness of Skirt in Vessel is expressed as Thickness of Skirt in Vessel = (4*Maximum Wind Moment)/(pi*(Mean Diameter of Skirt)^(2)*Axial Bending Stress at Base of Vessel). Here is an example- 1180 = (4*370440)/(pi*(19.89355)^(2)*1010000).

How to calculate Thickness of Skirt in Vessel?

With Maximum Wind Moment (M_w), Mean Diameter of Skirt (D_sk) & Axial Bending Stress at Base of Vessel (f_wb) we can find Thickness of Skirt in Vessel using the formula - Thickness of Skirt in Vessel = (4*Maximum Wind Moment)/(pi*(Mean Diameter of Skirt)^(2)*Axial Bending Stress at Base of Vessel). This formula also uses Archimedes' constant .

Can the Thickness of Skirt in Vessel be negative?

No, the Thickness of Skirt in Vessel, measured in Length cannot be negative.

Which unit is used to measure Thickness of Skirt in Vessel?

Thickness of Skirt in Vessel is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Skirt in Vessel can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Skirt in Vessel Formula

Thickness of Skirt in Vessel Example

Thickness of Skirt in Vessel Solution

Thickness of Skirt in Vessel Formula Elements

Other formulas in Design Thickness of Skirt category

How to Evaluate Thickness of Skirt in Vessel?

FAQs on Thickness of Skirt in Vessel

Variable Name