FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Shallow dished and Standard dished (Torishperical) Head Formula

Fx Copy

LaTeX Copy

Thickess of Torishperical Head is the surface obtained from the intersection of a spherical cap with a tangent torus. Check FAQs

t Torispherical = \frac{p \cdot R c \cdot (\frac{1}{4} \cdot (3 + {(\frac{R c}{R k})}^{0.5}))}{2 \cdot F c \cdot η}

t_{Torispherical} - Thickess of Torishperical Head?p - Internal Design Pressure?R_c - Crown Radius?R_k - Knuckle Radius?F_c - Design Stress?η - Joint Efficiency?

Thickness of Shallow dished and Standard dished (Torishperical) Head Example

With values

With units

Only example

Here is how the Thickness of Shallow dished and Standard dished (Torishperical) Head equation looks like with Values.

Here is how the Thickness of Shallow dished and Standard dished (Torishperical) Head equation looks like with Units.

Here is how the Thickness of Shallow dished and Standard dished (Torishperical) Head equation looks like.

347.639 = \frac{0.7 \cdot 1.4 \cdot (\frac{1}{4} \cdot (3 + {(\frac{1.4}{0.109})}^{0.5}))}{2 \cdot 1160 \cdot 2}

347.639m = \frac{0.7N/mm² \cdot 1.4m \cdot (\frac{1}{4} \cdot (3 + {(\frac{1.4m}{0.109m})}^{0.5}))}{2 \cdot 1160N/m² \cdot 2}

347.639 = \frac{0.7 \cdot 1.4 \cdot (\frac{1}{4} \cdot (3 + {(\frac{1.4}{0.109})}^{0.5}))}{2 \cdot 1160 \cdot 2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Thickness of Shallow dished and Standard dished (Torishperical) Head

Thickness of Shallow dished and Standard dished (Torishperical) Head Solution

Follow our step by step solution on how to calculate Thickness of Shallow dished and Standard dished (Torishperical) Head?

FIRST Step Consider the formula

t Torispherical = \frac{p \cdot R c \cdot (\frac{1}{4} \cdot (3 + {(\frac{R c}{R k})}^{0.5}))}{2 \cdot F c \cdot η}

Next Step Substitute values of Variables

∴

t Torispherical = \frac{0.7N/mm² \cdot 1.4m \cdot (\frac{1}{4} \cdot (3 + {(\frac{1.4m}{0.109m})}^{0.5}))}{2 \cdot 1160N/m² \cdot 2}

Next Step Convert Units

∴

t Torispherical = \frac{700000Pa \cdot 1.4m \cdot (\frac{1}{4} \cdot (3 + {(\frac{1.4m}{0.109m})}^{0.5}))}{2 \cdot 1160Pa \cdot 2}

Next Step Prepare to Evaluate

∴

t Torispherical = \frac{700000 \cdot 1.4 \cdot (\frac{1}{4} \cdot (3 + {(\frac{1.4}{0.109})}^{0.5}))}{2 \cdot 1160 \cdot 2}

Next Step Evaluate

∴

t Torispherical = 347.639043073119m

LAST Step Rounding Answer

∴

t Torispherical = 347.639m

Thickness of Shallow dished and Standard dished (Torishperical) Head Formula Elements

Variables

Thickess of Torishperical Head

Thickess of Torishperical Head is the surface obtained from the intersection of a spherical cap with a tangent torus.

Symbol: t_{Torispherical}

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Thickess of Torishperical Head

Internal Design Pressure

Internal Design Pressure is a measure of how the internal energy of a system changes when it expands or contracts at constant temperature.

Symbol: p

Measurement: PressureUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Internal Design Pressure

Crown Radius

Crown Radius is the horizontal distance, as seen in plan view, from the trunk of a tree to the edge of the crown.

Symbol: R_c

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Crown Radius

Knuckle Radius

Knuckle Radius is the radius of the torus.

Symbol: R_k

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Knuckle Radius

Design Stress

Design stress is the stress in which the factor of safety can be incurred.

Symbol: F_c

Measurement: PressureUnit: N/m²

Note: Value can be positive or negative.

Formulas to find Design Stress

Joint Efficiency

Joint efficiency is a factor required in all head and shell calculations that accounts for how closely a finished weld joint.

Symbol: η

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Joint Efficiency

Other formulas in Vessel Heads category

Go Thickness of Elliptical Head

t Elliptical = \frac{p \cdot a \cdot W}{2 \cdot F c \cdot η}

Go Thickness of Flat Plate Cover or Head

t Flat Plate = (C \cdot D) \cdot ({(\frac{p}{F c})}^{0.5})

Go Depth of Elliptical Head

h o = \frac{D o}{4}

Go Stress Intensification Factor using Ratio of Major to Minor Axis

W = (\frac{1}{6}) \cdot (2 + k^{2})

How to Evaluate Thickness of Shallow dished and Standard dished (Torishperical) Head?

Thickness of Shallow dished and Standard dished (Torishperical) Head evaluator uses Thickess of Torishperical Head = (Internal Design Pressure*Crown Radius*(1/4*(3+(Crown Radius/Knuckle Radius)^0.5)))/(2*Design Stress*Joint Efficiency) to evaluate the Thickess of Torishperical Head, Thickness of Shallow Dished and Standard Dished (Torishperical) Head is the surface obtained from the intersection of a spherical cap with a tangent torus. Thickess of Torishperical Head is denoted by t_{Torispherical} symbol.

How to evaluate Thickness of Shallow dished and Standard dished (Torishperical) Head using this online evaluator? To use this online evaluator for Thickness of Shallow dished and Standard dished (Torishperical) Head, enter Internal Design Pressure (p), Crown Radius (R_c), Knuckle Radius (R_k), Design Stress (F_c) & Joint Efficiency (η) and hit the calculate button.

FAQs on Thickness of Shallow dished and Standard dished (Torishperical) Head

What is the formula to find Thickness of Shallow dished and Standard dished (Torishperical) Head?

The formula of Thickness of Shallow dished and Standard dished (Torishperical) Head is expressed as Thickess of Torishperical Head = (Internal Design Pressure*Crown Radius*(1/4*(3+(Crown Radius/Knuckle Radius)^0.5)))/(2*Design Stress*Joint Efficiency). Here is an example- 347.639 = (700000*1.4*(1/4*(3+(1.4/0.109)^0.5)))/(2*1160*2).

How to calculate Thickness of Shallow dished and Standard dished (Torishperical) Head?

With Internal Design Pressure (p), Crown Radius (R_c), Knuckle Radius (R_k), Design Stress (F_c) & Joint Efficiency (η) we can find Thickness of Shallow dished and Standard dished (Torishperical) Head using the formula - Thickess of Torishperical Head = (Internal Design Pressure*Crown Radius*(1/4*(3+(Crown Radius/Knuckle Radius)^0.5)))/(2*Design Stress*Joint Efficiency).

Can the Thickness of Shallow dished and Standard dished (Torishperical) Head be negative?

No, the Thickness of Shallow dished and Standard dished (Torishperical) Head, measured in Length cannot be negative.

Which unit is used to measure Thickness of Shallow dished and Standard dished (Torishperical) Head?

Thickness of Shallow dished and Standard dished (Torishperical) Head is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Thickness of Shallow dished and Standard dished (Torishperical) Head can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Thickness of Shallow dished and Standard dished (Torishperical) Head Formula

Thickness of Shallow dished and Standard dished (Torishperical) Head Example

Thickness of Shallow dished and Standard dished (Torishperical) Head Solution

Thickness of Shallow dished and Standard dished (Torishperical) Head Formula Elements

Other formulas in Vessel Heads category

How to Evaluate Thickness of Shallow dished and Standard dished (Torishperical) Head?

FAQs on Thickness of Shallow dished and Standard dished (Torishperical) Head

Variable Name