FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Sediment given Drag Force Formula

Fx Copy

LaTeX Copy

Volume per Unit Area refers to function of diameter of particle for single grain as an inverse measure of surface area for drag or friction. Check FAQs

t = (\frac{F D}{γ w \cdot (G - 1) \cdot (1 - n) \cdot \sin (α i)})

t - Volume per Unit Area?F_D - Drag Force?γ_w - Unit Weight of Fluid?G - Specific Gravity of Sediment?n - Rugosity Coefficient?α_i - Angle of Inclination of Plane to Horizontal?

Thickness of Sediment given Drag Force Example

With values

With units

Only example

Here is how the Thickness of Sediment given Drag Force equation looks like with Values.

Here is how the Thickness of Sediment given Drag Force equation looks like with Units.

Here is how the Thickness of Sediment given Drag Force equation looks like.

4.772 = (\frac{11.98}{9810 \cdot (1.3 - 1) \cdot (1 - 0.015) \cdot \sin (60)})

4.772mm = (\frac{11.98N}{9810N/m³ \cdot (1.3 - 1) \cdot (1 - 0.015) \cdot \sin (60°)})

4.772 = (\frac{11.98}{9810 \cdot (1.3 - 1) \cdot (1 - 0.015) \cdot \sin (60)})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Environmental Engineering » fx Thickness of Sediment given Drag Force

Thickness of Sediment given Drag Force Solution

Follow our step by step solution on how to calculate Thickness of Sediment given Drag Force?

FIRST Step Consider the formula

t = (\frac{F D}{γ w \cdot (G - 1) \cdot (1 - n) \cdot \sin (α i)})

Next Step Substitute values of Variables

∴

t = (\frac{11.98N}{9810N/m³ \cdot (1.3 - 1) \cdot (1 - 0.015) \cdot \sin (60°)})

Next Step Convert Units

∴

t = (\frac{11.98N}{9810N/m³ \cdot (1.3 - 1) \cdot (1 - 0.015) \cdot \sin (1.0472rad)})

Next Step Prepare to Evaluate

∴

t = (\frac{11.98}{9810 \cdot (1.3 - 1) \cdot (1 - 0.015) \cdot \sin (1.0472)})

Next Step Evaluate

∴

t = 0.00477199185533081m

Next Step Convert to Output's Unit

∴

t = 4.77199185533081mm

LAST Step Rounding Answer

∴

t = 4.772mm

Thickness of Sediment given Drag Force Formula Elements

Variables

Functions

Volume per Unit Area

Volume per Unit Area refers to function of diameter of particle for single grain as an inverse measure of surface area for drag or friction.

Symbol: t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Volume per Unit Area

Drag Force

Drag Force is the resisting force experienced by an object moving through a fluid.

Symbol: F_D

Measurement: ForceUnit: N

Note: Value can be positive or negative.

Formulas to find Drag Force

Unit Weight of Fluid

Unit Weight of Fluid refers to the weight per unit volume, often expressed in N/m³ or lb/ft³ and varies with fluid density (for water 9810N/m3).

Symbol: γ_w

Measurement: Specific WeightUnit: N/m³

Note: Value should be greater than 0.

Formulas to find Unit Weight of Fluid

Specific Gravity of Sediment

Specific Gravity of Sediment is the ratio of sediment particle density to the density of water, indicating its heaviness.

Symbol: G

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Specific Gravity of Sediment

Rugosity Coefficient

The Rugosity Coefficient, also known as the Manning's n, quantifies surface roughness in channels, affecting flow velocity and resistance.

Symbol: n

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Rugosity Coefficient

Angle of Inclination of Plane to Horizontal

Angle of Inclination of Plane to Horizontal is formed by the inclination of one plane to another; measured in degrees or radians.

Symbol: α_i

Measurement: AngleUnit: °

Note: Value should be between 0 to 90.

Formulas to find Angle of Inclination of Plane to Horizontal

sin

Sine is a trigonometric function that describes the ratio of the length of the opposite side of a right triangle to the length of the hypotenuse.

Syntax: sin(Angle)

Other formulas in Drag Force category

Go Drag Force Exerted by Flowing Water

F D = γ w \cdot (G - 1) \cdot (1 - n) \cdot t \cdot \sin (α i)

Go Unit Weight of Water given Drag Force

γ w = (\frac{F D}{(G - 1) \cdot (1 - n) \cdot t \cdot \sin (α i)})

Go Rugosity Coefficient given Drag Force

n = 1 - (\frac{F D}{γ w \cdot (G - 1) \cdot t \cdot \sin (α i)})

Go Angle of Inclination given drag force

α i = a r \sin (\frac{F D}{γ w \cdot (G - 1) \cdot (1 - n) \cdot t})

How to Evaluate Thickness of Sediment given Drag Force?

Thickness of Sediment given Drag Force evaluator uses Volume per Unit Area = (Drag Force/(Unit Weight of Fluid*(Specific Gravity of Sediment-1)*(1-Rugosity Coefficient)*sin(Angle of Inclination of Plane to Horizontal))) to evaluate the Volume per Unit Area, The Thickness of Sediment given Drag Force is defined as function of diameter of particle for single grain as an inverse measure of surface area for drag or friction. Volume per Unit Area is denoted by t symbol.

How to evaluate Thickness of Sediment given Drag Force using this online evaluator? To use this online evaluator for Thickness of Sediment given Drag Force, enter Drag Force (F_D), Unit Weight of Fluid (γ_w), Specific Gravity of Sediment (G), Rugosity Coefficient (n) & Angle of Inclination of Plane to Horizontal (α_i) and hit the calculate button.

FAQs on Thickness of Sediment given Drag Force

What is the formula to find Thickness of Sediment given Drag Force?

The formula of Thickness of Sediment given Drag Force is expressed as Volume per Unit Area = (Drag Force/(Unit Weight of Fluid*(Specific Gravity of Sediment-1)*(1-Rugosity Coefficient)*sin(Angle of Inclination of Plane to Horizontal))). Here is an example- 4692.326 = (11.98/(9810*(1.3-1)*(1-0.015)*sin(1.0471975511964))).

How to calculate Thickness of Sediment given Drag Force?

With Drag Force (F_D), Unit Weight of Fluid (γ_w), Specific Gravity of Sediment (G), Rugosity Coefficient (n) & Angle of Inclination of Plane to Horizontal (α_i) we can find Thickness of Sediment given Drag Force using the formula - Volume per Unit Area = (Drag Force/(Unit Weight of Fluid*(Specific Gravity of Sediment-1)*(1-Rugosity Coefficient)*sin(Angle of Inclination of Plane to Horizontal))). This formula also uses Sine (sin) function(s).

Can the Thickness of Sediment given Drag Force be negative?

No, the Thickness of Sediment given Drag Force, measured in Length cannot be negative.

Which unit is used to measure Thickness of Sediment given Drag Force?

Thickness of Sediment given Drag Force is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Sediment given Drag Force can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Sediment given Drag Force Formula

Thickness of Sediment given Drag Force Example

Thickness of Sediment given Drag Force Solution

Thickness of Sediment given Drag Force Formula Elements

Other formulas in Drag Force category

How to Evaluate Thickness of Sediment given Drag Force?

FAQs on Thickness of Sediment given Drag Force

Variable Name