FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Formula

Fx Copy

LaTeX Copy

The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design. Check FAQs

t = \frac{P}{(w - d h) \cdot σ o}

t - Thickness of Plate?P - Load on Flat Plate?w - Width of Plate?d_h - Diameter of Transverse Hole in Plate?σ_o - Nominal Stress?

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Example

With values

With units

Only example

Here is how the Thickness of Rectangular Plate with Transverse Hole given Nominal Stress equation looks like with Values.

Here is how the Thickness of Rectangular Plate with Transverse Hole given Nominal Stress equation looks like with Units.

Here is how the Thickness of Rectangular Plate with Transverse Hole given Nominal Stress equation looks like.

10.0029 = \frac{8750}{(70 - 35.01) \cdot 25}

10.0029mm = \frac{8750N}{(70mm - 35.01mm) \cdot 25N/mm²}

10.0029 = \frac{8750}{(70 - 35.01) \cdot 25}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Mechanical » Category

Machine Design » fx Thickness of Rectangular Plate with Transverse Hole given Nominal Stress

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Solution

Follow our step by step solution on how to calculate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

FIRST Step Consider the formula

t = \frac{P}{(w - d h) \cdot σ o}

Next Step Substitute values of Variables

∴

t = \frac{8750N}{(70mm - 35.01mm) \cdot 25N/mm²}

Next Step Convert Units

∴

t = \frac{8750N}{(0.07m - 0.035m) \cdot 2.5E+7Pa}

Next Step Prepare to Evaluate

∴

t = \frac{8750}{(0.07 - 0.035) \cdot 2.5E+7}

Next Step Evaluate

∴

t = 0.010002857959417m

Next Step Convert to Output's Unit

∴

t = 10.002857959417mm

LAST Step Rounding Answer

∴

t = 10.0029mm

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Formula Elements

Variables

Thickness of Plate

The Thickness of Plate is the measurement of how thick a plate material is, which influences its strength and ability to withstand applied loads in mechanical design.

Symbol: t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Load on Flat Plate

The Load on Flat Plate is the force applied uniformly across a flat surface, affecting the plate's structural integrity and performance under various loading conditions.

Symbol: P

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Load on Flat Plate

Width of Plate

The Width of Plate is the measurement across the plate, influencing its strength and performance under fluctuating loads in mechanical design applications.

Symbol: w

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Width of Plate

Diameter of Transverse Hole in Plate

The Diameter of Transverse Hole in Plate is the measurement across the widest part of a hole in a plate, affecting stress distribution and structural integrity.

Symbol: d_h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Transverse Hole in Plate

Nominal Stress

The Nominal Stress is the average stress experienced by a material under load, used to assess its performance and safety in mechanical design applications.

Symbol: σ_o

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Nominal Stress

Other formulas in Rectangular Plate against Fluctuating Loads category

Go Highest Value of Actual Stress near Discontinuity

σa max = k f \cdot σ o

Go Nominal Tensile Stress in Rectangular Plate with Transverse Hole

σ o = \frac{P}{(w - d h) \cdot t}

Go Load on Rectangular Plate with Transverse Hole given Nominal Stress

P = σ o \cdot (w - d h) \cdot t

Go Width of Rectangular Plate with Transverse Hole given Nominal Stress

w = \frac{P}{t \cdot σ o} + d h

How to Evaluate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress evaluator uses Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress) to evaluate the Thickness of Plate, The Thickness of Rectangular plate with Transverse hole given Nominal stress is the thickness or the smallest dimension of a rectangular plate with a transverse hole with stress concentration. Thickness of Plate is denoted by t symbol.

How to evaluate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress using this online evaluator? To use this online evaluator for Thickness of Rectangular Plate with Transverse Hole given Nominal Stress, enter Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Nominal Stress (σ_o) and hit the calculate button.

FAQs on Thickness of Rectangular Plate with Transverse Hole given Nominal Stress

What is the formula to find Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

The formula of Thickness of Rectangular Plate with Transverse Hole given Nominal Stress is expressed as Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress). Here is an example- 10000 = 8750/((0.07-0.03501)*25000000).

How to calculate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

With Load on Flat Plate (P), Width of Plate (w), Diameter of Transverse Hole in Plate (d_h) & Nominal Stress (σ_o) we can find Thickness of Rectangular Plate with Transverse Hole given Nominal Stress using the formula - Thickness of Plate = Load on Flat Plate/((Width of Plate-Diameter of Transverse Hole in Plate)*Nominal Stress).

Can the Thickness of Rectangular Plate with Transverse Hole given Nominal Stress be negative?

No, the Thickness of Rectangular Plate with Transverse Hole given Nominal Stress, measured in Length cannot be negative.

Which unit is used to measure Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Rectangular Plate with Transverse Hole given Nominal Stress can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Formula

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Example

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Solution

Thickness of Rectangular Plate with Transverse Hole given Nominal Stress Formula Elements

Other formulas in Rectangular Plate against Fluctuating Loads category

How to Evaluate Thickness of Rectangular Plate with Transverse Hole given Nominal Stress?

FAQs on Thickness of Rectangular Plate with Transverse Hole given Nominal Stress

Variable Name