FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Plates in Lap Joints Formula

Fx Copy

LaTeX Copy

Plate Thickness in Lap Joint refers to the thickness of the overlapping plates that are welded together. Check FAQs

p tl = \frac{1.52 \cdot h}{s}

p_tl - Plate Thickness in Lap Joint?h - Length of Fillet Leg?s - Transverse Shrinkage?

Thickness of Plates in Lap Joints Example

With values

With units

Only example

Here is how the Thickness of Plates in Lap Joints equation looks like with Values.

Here is how the Thickness of Plates in Lap Joints equation looks like with Units.

Here is how the Thickness of Plates in Lap Joints equation looks like.

908.2 = \frac{1.52 \cdot 2.39}{4}

908.2mm = \frac{1.52 \cdot 2.39mm}{4mm}

908.2 = \frac{1.52 \cdot 2.39}{4}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Welding » fx Thickness of Plates in Lap Joints

Thickness of Plates in Lap Joints Solution

Follow our step by step solution on how to calculate Thickness of Plates in Lap Joints?

FIRST Step Consider the formula

p tl = \frac{1.52 \cdot h}{s}

Next Step Substitute values of Variables

∴

p tl = \frac{1.52 \cdot 2.39mm}{4mm}

Next Step Convert Units

∴

p tl = \frac{1.52 \cdot 0.0024m}{0.004m}

Next Step Prepare to Evaluate

∴

p tl = \frac{1.52 \cdot 0.0024}{0.004}

Next Step Evaluate

∴

p tl = 0.9082m

LAST Step Convert to Output's Unit

∴

p tl = 908.2mm

Thickness of Plates in Lap Joints Formula Elements

Variables

Plate Thickness in Lap Joint

Plate Thickness in Lap Joint refers to the thickness of the overlapping plates that are welded together.

Symbol: p_tl

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Plate Thickness in Lap Joint

Length of Fillet Leg

The length of fillet leg in welding is the distance from the root of the fillet weld to the toe, measured along the legs of the triangular cross-section.

Symbol: h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Fillet Leg

Transverse Shrinkage

Transverse Shrinkage is a shrinkage of the metal result of contraction of the base metal.

Symbol: s

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Transverse Shrinkage

Other formulas in Lap Joint with Fillets category

Go Transverse Shrinkage in Lap Joint with Fillets

s = \frac{1.52 \cdot h}{p tl}

Go Length of Fillet Leg in Lap Joints from Shrinkage

h = \frac{s \cdot p tl}{1.52}

How to Evaluate Thickness of Plates in Lap Joints?

Thickness of Plates in Lap Joints evaluator uses Plate Thickness in Lap Joint = (1.52*Length of Fillet Leg)/Transverse Shrinkage to evaluate the Plate Thickness in Lap Joint, Thickness of Plates in Lap Joints is the thickness of that plate which is being joined on top of other plate making a lap joint. Plate Thickness in Lap Joint is denoted by p_tl symbol.

How to evaluate Thickness of Plates in Lap Joints using this online evaluator? To use this online evaluator for Thickness of Plates in Lap Joints, enter Length of Fillet Leg (h) & Transverse Shrinkage (s) and hit the calculate button.

FAQs on Thickness of Plates in Lap Joints

What is the formula to find Thickness of Plates in Lap Joints?

The formula of Thickness of Plates in Lap Joints is expressed as Plate Thickness in Lap Joint = (1.52*Length of Fillet Leg)/Transverse Shrinkage. Here is an example- 800176.2 = (1.52*0.00239)/0.004.

How to calculate Thickness of Plates in Lap Joints?

With Length of Fillet Leg (h) & Transverse Shrinkage (s) we can find Thickness of Plates in Lap Joints using the formula - Plate Thickness in Lap Joint = (1.52*Length of Fillet Leg)/Transverse Shrinkage.

Can the Thickness of Plates in Lap Joints be negative?

No, the Thickness of Plates in Lap Joints, measured in Length cannot be negative.

Which unit is used to measure Thickness of Plates in Lap Joints?

Thickness of Plates in Lap Joints is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Plates in Lap Joints can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Plates in Lap Joints Formula

Thickness of Plates in Lap Joints Example

Thickness of Plates in Lap Joints Solution

Thickness of Plates in Lap Joints Formula Elements

Other formulas in Lap Joint with Fillets category

How to Evaluate Thickness of Plates in Lap Joints?

FAQs on Thickness of Plates in Lap Joints

Variable Name