FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Formula

Fx Copy

LaTeX Copy

Thickness of Transverse Fillet Welded Plate is defined as the thickness of the plate (usually the lowest dimension of the plate) which is welded using a transverse fillet weld. Check FAQs

t = \frac{P t}{L \cdot σ t}

t - Thickness of Transverse Fillet Welded Plate?P_t - Load on Transverse Fillet Weld?L - Length of Weld?σ_t - Tensile Stress in Transverse Fillet Weld?

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Example

With values

With units

Only example

Here is how the Thickness of Plate given Tensile Stress in Transverse Fillet Weld equation looks like with Values.

Here is how the Thickness of Plate given Tensile Stress in Transverse Fillet Weld equation looks like with Units.

Here is how the Thickness of Plate given Tensile Stress in Transverse Fillet Weld equation looks like.

15.0482 = \frac{165.5}{195 \cdot 56.4}

15.0482mm = \frac{165.5kN}{195mm \cdot 56.4N/mm²}

15.0482 = \frac{165.5}{195 \cdot 56.4}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Thickness of Plate given Tensile Stress in Transverse Fillet Weld

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Solution

Follow our step by step solution on how to calculate Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

FIRST Step Consider the formula

t = \frac{P t}{L \cdot σ t}

Next Step Substitute values of Variables

∴

t = \frac{165.5kN}{195mm \cdot 56.4N/mm²}

Next Step Convert Units

∴

t = \frac{165500N}{0.195m \cdot 5.6E+7Pa}

Next Step Prepare to Evaluate

∴

t = \frac{165500}{0.195 \cdot 5.6E+7}

Next Step Evaluate

∴

t = 0.0150481905801055m

Next Step Convert to Output's Unit

∴

t = 15.0481905801055mm

LAST Step Rounding Answer

∴

t = 15.0482mm

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Formula Elements

Variables

Thickness of Transverse Fillet Welded Plate

Thickness of Transverse Fillet Welded Plate is defined as the thickness of the plate (usually the lowest dimension of the plate) which is welded using a transverse fillet weld.

Symbol: t

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Transverse Fillet Welded Plate

Load on Transverse Fillet Weld

Load on transverse fillet weld is the force or the load applied perpendicular to the specimen cross-section.

Symbol: P_t

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Load on Transverse Fillet Weld

Length of Weld

The Length of Weld is the linear distance of the welding segment joined by the welded joint.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Weld

Tensile Stress in Transverse Fillet Weld

Tensile Stress in Transverse Fillet Weld is the stress occurred in the transverse fillet welds when it is subjected to a tensile force trying to generate a pull in the welded area.

Symbol: σ_t

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Tensile Stress in Transverse Fillet Weld

Other formulas in Transverse Fillet Weld category

Go Permissible Tensile Strength for Double Transverse Fillet Joint

σ t = \frac{P}{1.414 \cdot L \cdot L}

Go Tensile Stress in Transverse Fillet Weld

σ t = \frac{P t}{0.707 \cdot h l \cdot L}

Go Tensile Force on Plates given Tensile Stress in Transverse Fillet Weld

P t = σ t \cdot 0.707 \cdot h l \cdot L

Go Length of weld given Tensile Stress in Transverse Fillet Weld

L = \frac{P t}{0.707 \cdot h l \cdot σ t}

How to Evaluate Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

Thickness of Plate given Tensile Stress in Transverse Fillet Weld evaluator uses Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld) to evaluate the Thickness of Transverse Fillet Welded Plate, The thickness of Plate given Tensile Stress in Transverse Fillet Weld is the actual thickness of the plate to be welded and as a rule, the leg length h is equal to the plate thickness. Thickness of Transverse Fillet Welded Plate is denoted by t symbol.

How to evaluate Thickness of Plate given Tensile Stress in Transverse Fillet Weld using this online evaluator? To use this online evaluator for Thickness of Plate given Tensile Stress in Transverse Fillet Weld, enter Load on Transverse Fillet Weld (P_t), Length of Weld (L) & Tensile Stress in Transverse Fillet Weld (σ_t) and hit the calculate button.

FAQs on Thickness of Plate given Tensile Stress in Transverse Fillet Weld

What is the formula to find Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

The formula of Thickness of Plate given Tensile Stress in Transverse Fillet Weld is expressed as Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld). Here is an example- 15048.19 = 165500/(0.195*56400000).

How to calculate Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

With Load on Transverse Fillet Weld (P_t), Length of Weld (L) & Tensile Stress in Transverse Fillet Weld (σ_t) we can find Thickness of Plate given Tensile Stress in Transverse Fillet Weld using the formula - Thickness of Transverse Fillet Welded Plate = Load on Transverse Fillet Weld/(Length of Weld*Tensile Stress in Transverse Fillet Weld).

Can the Thickness of Plate given Tensile Stress in Transverse Fillet Weld be negative?

No, the Thickness of Plate given Tensile Stress in Transverse Fillet Weld, measured in Length cannot be negative.

Which unit is used to measure Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

Thickness of Plate given Tensile Stress in Transverse Fillet Weld is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Plate given Tensile Stress in Transverse Fillet Weld can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Formula

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Example

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Solution

Thickness of Plate given Tensile Stress in Transverse Fillet Weld Formula Elements

Other formulas in Transverse Fillet Weld category

How to Evaluate Thickness of Plate given Tensile Stress in Transverse Fillet Weld?

FAQs on Thickness of Plate given Tensile Stress in Transverse Fillet Weld

Variable Name