FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of plate given tearing strength of rivet Formula

GoThickness of plate given efficiency of riveted joint Formula

GoThickness of plate given strength of solid plate per pitch length Formula

Fx Copy

LaTeX Copy

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness. Check FAQs

t plate = \frac{T strength}{σ t \cdot (p - D rivet)}

t_plate - Thickness of Plate?T_strength - Tearing Strength?σ_t - Tensile Stress?p - Pitch of Rivet?D_rivet - Rivet Diameter?

Thickness of plate given tearing strength of rivet Example

With values

With units

Only example

Here is how the Thickness of plate given tearing strength of rivet equation looks like with Values.

Here is how the Thickness of plate given tearing strength of rivet equation looks like with Units.

Here is how the Thickness of plate given tearing strength of rivet equation looks like.

11560.6936 = \frac{4}{0.173 \cdot (20 - 18)}

11560.6936mm = \frac{4kN}{0.173MPa \cdot (20mm - 18mm)}

11560.6936 = \frac{4}{0.173 \cdot (20 - 18)}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Thickness of plate given tearing strength of rivet

Thickness of plate given tearing strength of rivet Solution

Follow our step by step solution on how to calculate Thickness of plate given tearing strength of rivet?

FIRST Step Consider the formula

t plate = \frac{T strength}{σ t \cdot (p - D rivet)}

Next Step Substitute values of Variables

∴

t plate = \frac{4kN}{0.173MPa \cdot (20mm - 18mm)}

Next Step Convert Units

∴

t plate = \frac{4000N}{173000Pa \cdot (0.02m - 0.018m)}

Next Step Prepare to Evaluate

∴

t plate = \frac{4000}{173000 \cdot (0.02 - 0.018)}

Next Step Evaluate

∴

t plate = 11.5606936416185m

Next Step Convert to Output's Unit

∴

t plate = 11560.6936416185mm

LAST Step Rounding Answer

∴

t plate = 11560.6936mm

Thickness of plate given tearing strength of rivet Formula Elements

Variables

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Tearing Strength

Tearing strength is defined as the force required to start or to continue to tear a fabric, in either weft or warp direction, under specified conditions.

Symbol: T_strength

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Tearing Strength

Tensile Stress

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Pitch of Rivet

Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.

Symbol: p

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Pitch of Rivet

Rivet Diameter

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

Symbol: D_rivet

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Rivet Diameter

Other Formulas to find Thickness of Plate

Go Thickness of plate given efficiency of riveted joint

t plate = \frac{P l}{σ t \cdot p \cdot η}

Go Thickness of plate given strength of solid plate per pitch length

t plate = \frac{S p}{σ t \cdot p}

Go Thickness of plates given crushing strength for double rivet

t plate = \frac{P c}{2 \cdot σ c \cdot D rivet}

Go Thickness of plates given crushing strength for single rivet

t plate = \frac{P c}{1 \cdot σ c \cdot D rivet}

How to Evaluate Thickness of plate given tearing strength of rivet?

Thickness of plate given tearing strength of rivet evaluator uses Thickness of Plate = Tearing Strength/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)) to evaluate the Thickness of Plate, The Thickness of plate given tearing strength of rivet formula is defined as the thickness of the thickest sheet that is being joined. Thickness of Plate is denoted by t_plate symbol.

How to evaluate Thickness of plate given tearing strength of rivet using this online evaluator? To use this online evaluator for Thickness of plate given tearing strength of rivet, enter Tearing Strength (T_strength), Tensile Stress (σ_t), Pitch of Rivet (p) & Rivet Diameter (D_rivet) and hit the calculate button.

FAQs on Thickness of plate given tearing strength of rivet

What is the formula to find Thickness of plate given tearing strength of rivet?

The formula of Thickness of plate given tearing strength of rivet is expressed as Thickness of Plate = Tearing Strength/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)). Here is an example- 1.2E+7 = 4000/(173000*(0.02-0.018)).

How to calculate Thickness of plate given tearing strength of rivet?

With Tearing Strength (T_strength), Tensile Stress (σ_t), Pitch of Rivet (p) & Rivet Diameter (D_rivet) we can find Thickness of plate given tearing strength of rivet using the formula - Thickness of Plate = Tearing Strength/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)).

What are the other ways to Calculate Thickness of Plate?

Here are the different ways to Calculate Thickness of Plate-

Thickness of Plate=Least Value of Strength/(Tensile Stress*Pitch of Rivet*Efficiency of Riveted Joint)
Thickness of Plate=Strength of Solid Plate/(Tensile Stress*Pitch of Rivet)
Thickness of Plate=Crushing strength/(2*Crushing Stress*Rivet Diameter)

Can the Thickness of plate given tearing strength of rivet be negative?

No, the Thickness of plate given tearing strength of rivet, measured in Length cannot be negative.

Which unit is used to measure Thickness of plate given tearing strength of rivet?

Thickness of plate given tearing strength of rivet is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of plate given tearing strength of rivet can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of plate given tearing strength of rivet Formula

​GoThickness of plate given efficiency of riveted joint Formula

​GoThickness of plate given strength of solid plate per pitch length Formula

Thickness of plate given tearing strength of rivet Example

Thickness of plate given tearing strength of rivet Solution

Thickness of plate given tearing strength of rivet Formula Elements

Other Formulas to find Thickness of Plate

How to Evaluate Thickness of plate given tearing strength of rivet?

FAQs on Thickness of plate given tearing strength of rivet

Variable Name

GoThickness of plate given efficiency of riveted joint Formula

GoThickness of plate given strength of solid plate per pitch length Formula