FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Plate given safe tensile load that plate can withstand Formula

Fx Copy

LaTeX Copy

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness. Check FAQs

t plate = \frac{P load}{σ t \cdot (p - D rivet)}

t_plate - Thickness of Plate?P_load - Tensile Load?σ_t - Tensile Stress?p - Pitch of Rivet?D_rivet - Rivet Diameter?

Thickness of Plate given safe tensile load that plate can withstand Example

With values

With units

Only example

Here is how the Thickness of Plate given safe tensile load that plate can withstand equation looks like with Values.

Here is how the Thickness of Plate given safe tensile load that plate can withstand equation looks like with Units.

Here is how the Thickness of Plate given safe tensile load that plate can withstand equation looks like.

34.6821 = \frac{0.012}{0.173 \cdot (20 - 18)}

34.6821mm = \frac{0.012kN}{0.173MPa \cdot (20mm - 18mm)}

34.6821 = \frac{0.012}{0.173 \cdot (20 - 18)}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Thickness of Plate given safe tensile load that plate can withstand

Thickness of Plate given safe tensile load that plate can withstand Solution

Follow our step by step solution on how to calculate Thickness of Plate given safe tensile load that plate can withstand?

FIRST Step Consider the formula

t plate = \frac{P load}{σ t \cdot (p - D rivet)}

Next Step Substitute values of Variables

∴

t plate = \frac{0.012kN}{0.173MPa \cdot (20mm - 18mm)}

Next Step Convert Units

∴

t plate = \frac{12N}{173000Pa \cdot (0.02m - 0.018m)}

Next Step Prepare to Evaluate

∴

t plate = \frac{12}{173000 \cdot (0.02 - 0.018)}

Next Step Evaluate

∴

t plate = 0.0346820809248555m

Next Step Convert to Output's Unit

∴

t plate = 34.6820809248555mm

LAST Step Rounding Answer

∴

t plate = 34.6821mm

Thickness of Plate given safe tensile load that plate can withstand Formula Elements

Variables

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Tensile Load

Tensile Load is the stretching force acting on the material and generally results in tensile stress and tensile strain in the specimen.

Symbol: P_load

Measurement: ForceUnit: kN

Note: Value can be positive or negative.

Formulas to find Tensile Load

Tensile Stress

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Pitch of Rivet

Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.

Symbol: p

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Pitch of Rivet

Rivet Diameter

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

Symbol: D_rivet

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Rivet Diameter

Other formulas in Failure Due to Tearing of the Plate Between Rivets of a Row category

Go Safe tensile load that plate can withstand given area of plate

P load = σ t \cdot A b

Go Safe tensile stress given area of base plate and tensile load

σ t = \frac{P load}{A b}

Go Area of plate for given safe tensile load that plate can withstand

A b = \frac{P load}{σ t}

Go Safe tensile load that plate can withstand

P load = σ t \cdot (p - D rivet) \cdot t plate

How to Evaluate Thickness of Plate given safe tensile load that plate can withstand?

Thickness of Plate given safe tensile load that plate can withstand evaluator uses Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)) to evaluate the Thickness of Plate, The Thickness of Plate given safe tensile load that plate can withstand formula is defined as the thickness of the material of the plate for the rivet. Thickness of Plate is denoted by t_plate symbol.

How to evaluate Thickness of Plate given safe tensile load that plate can withstand using this online evaluator? To use this online evaluator for Thickness of Plate given safe tensile load that plate can withstand, enter Tensile Load (P_load), Tensile Stress (σ_t), Pitch of Rivet (p) & Rivet Diameter (D_rivet) and hit the calculate button.

FAQs on Thickness of Plate given safe tensile load that plate can withstand

What is the formula to find Thickness of Plate given safe tensile load that plate can withstand?

The formula of Thickness of Plate given safe tensile load that plate can withstand is expressed as Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)). Here is an example- 2.8E+7 = 12/(173000*(0.02-0.018)).

How to calculate Thickness of Plate given safe tensile load that plate can withstand?

With Tensile Load (P_load), Tensile Stress (σ_t), Pitch of Rivet (p) & Rivet Diameter (D_rivet) we can find Thickness of Plate given safe tensile load that plate can withstand using the formula - Thickness of Plate = Tensile Load/(Tensile Stress*(Pitch of Rivet-Rivet Diameter)).

Can the Thickness of Plate given safe tensile load that plate can withstand be negative?

No, the Thickness of Plate given safe tensile load that plate can withstand, measured in Length cannot be negative.

Which unit is used to measure Thickness of Plate given safe tensile load that plate can withstand?

Thickness of Plate given safe tensile load that plate can withstand is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Plate given safe tensile load that plate can withstand can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Plate given safe tensile load that plate can withstand Formula

Thickness of Plate given safe tensile load that plate can withstand Example

Thickness of Plate given safe tensile load that plate can withstand Solution

Thickness of Plate given safe tensile load that plate can withstand Formula Elements

Other formulas in Failure Due to Tearing of the Plate Between Rivets of a Row category

How to Evaluate Thickness of Plate given safe tensile load that plate can withstand?

FAQs on Thickness of Plate given safe tensile load that plate can withstand

Variable Name