FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Lift given Compaction Production by Compaction Equipment Formula

Fx Copy

LaTeX Copy

Lift Thickness is the depth of a compacted layer of fill material placed during construction. This term is important in the compaction process, where fill material is often placed in layers. Check FAQs

L = \frac{y \cdot P}{16 \cdot W \cdot S \cdot E \cdot PR}

L - Lift Thickness?y - Production due to Compaction?P - Number of Passes?W - Width of Roller?S - Roller Speed?E - Efficiency Factor?PR - Pay Ratio?

Thickness of Lift given Compaction Production by Compaction Equipment Example

With values

With units

Only example

Here is how the Thickness of Lift given Compaction Production by Compaction Equipment equation looks like with Values.

Here is how the Thickness of Lift given Compaction Production by Compaction Equipment equation looks like with Units.

Here is how the Thickness of Lift given Compaction Production by Compaction Equipment equation looks like.

7.1748 = \frac{297.59 \cdot 5}{16 \cdot 2.89 \cdot 3 \cdot 0.5 \cdot 2.99}

7.1748mm = \frac{297.59m³/hr \cdot 5}{16 \cdot 2.89m \cdot 3km/h \cdot 0.5 \cdot 2.99m³}

7.1748 = \frac{297.59 \cdot 5}{16 \cdot 2.89 \cdot 3 \cdot 0.5 \cdot 2.99}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Geotechnical Engineering » fx Thickness of Lift given Compaction Production by Compaction Equipment

Thickness of Lift given Compaction Production by Compaction Equipment Solution

Follow our step by step solution on how to calculate Thickness of Lift given Compaction Production by Compaction Equipment?

FIRST Step Consider the formula

L = \frac{y \cdot P}{16 \cdot W \cdot S \cdot E \cdot PR}

Next Step Substitute values of Variables

∴

L = \frac{297.59m³/hr \cdot 5}{16 \cdot 2.89m \cdot 3km/h \cdot 0.5 \cdot 2.99m³}

Next Step Convert Units

∴

L = \frac{0.0827m³/s \cdot 5}{16 \cdot 2.89m \cdot 0.8333m/s \cdot 0.5 \cdot 2.99m³}

Next Step Prepare to Evaluate

∴

L = \frac{0.0827 \cdot 5}{16 \cdot 2.89 \cdot 0.8333 \cdot 0.5 \cdot 2.99}

Next Step Evaluate

∴

L = 0.00717477134469763m

Next Step Convert to Output's Unit

∴

L = 7.17477134469763mm

LAST Step Rounding Answer

∴

L = 7.1748mm

Thickness of Lift given Compaction Production by Compaction Equipment Formula Elements

Variables

Lift Thickness

Lift Thickness is the depth of a compacted layer of fill material placed during construction. This term is important in the compaction process, where fill material is often placed in layers.

Symbol: L

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Lift Thickness

Production due to Compaction

Production due to Compaction is the exertion of force on something so that it becomes denser.

Symbol: y

Measurement: Volumetric Flow RateUnit: m³/hr

Note: Value should be greater than 0.

Formulas to find Production due to Compaction

Number of Passes

Number of Passes is the number of times a compactor (such as a vibratory roller or a plate compactor) passes over a specific area of soil or aggregate during compaction.

Symbol: P

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Number of Passes

Width of Roller

Width of Roller is the physical width of the roller used in compaction processes, such as those employed in soil and pavement construction.

Symbol: W

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Width of Roller

Roller Speed

Roller Speed is the velocity at which a compaction roller moves over soil or other materials during the compaction process.

Symbol: S

Measurement: SpeedUnit: km/h

Note: Value should be greater than 0.

Formulas to find Roller Speed

Efficiency Factor

The Efficiency Factor is a dimensionless parameter used to relate the strength or stiffness of improved soil (after treatment) to its original, untreated state.

Symbol: E

Measurement: NAUnit: Unitless

Note: Value should be greater than 0.

Formulas to find Efficiency Factor

Pay Ratio

Pay Ratio is the ratio between the effective stress and the total stress in soil mechanics.

Symbol: PR

Measurement: VolumeUnit: m³

Note: Value should be greater than 0.

Formulas to find Pay Ratio

Other formulas in Compaction Equipment category

Go Compaction Production by Compaction Equipment

y = \frac{16 \cdot W \cdot S \cdot L \cdot E \cdot PR}{P}

Go Width of Roller given Compaction Production by Compaction Equipment

W = \frac{y \cdot P}{16 \cdot S \cdot L \cdot PR \cdot E}

How to Evaluate Thickness of Lift given Compaction Production by Compaction Equipment?

Thickness of Lift given Compaction Production by Compaction Equipment evaluator uses Lift Thickness = (Production due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Pay Ratio) to evaluate the Lift Thickness, The Thickness of Lift given Compaction Production by Compaction Equipment formula is defined as the vertical thickness of soil or aggregate layers (known as lifts) that are compacted using specific compaction equipment, such as rollers or compactors. This thickness is crucial because it determines the effectiveness of compaction in achieving the desired density and strength of the soil or aggregate material. Lift Thickness is denoted by L symbol.

How to evaluate Thickness of Lift given Compaction Production by Compaction Equipment using this online evaluator? To use this online evaluator for Thickness of Lift given Compaction Production by Compaction Equipment, enter Production due to Compaction (y), Number of Passes (P), Width of Roller (W), Roller Speed (S), Efficiency Factor (E) & Pay Ratio (PR) and hit the calculate button.

FAQs on Thickness of Lift given Compaction Production by Compaction Equipment

What is the formula to find Thickness of Lift given Compaction Production by Compaction Equipment?

The formula of Thickness of Lift given Compaction Production by Compaction Equipment is expressed as Lift Thickness = (Production due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Pay Ratio). Here is an example- 7174.771 = (0.0826638888888889*5)/(16*2.89*0.833333333333333*0.5*2.99).

How to calculate Thickness of Lift given Compaction Production by Compaction Equipment?

With Production due to Compaction (y), Number of Passes (P), Width of Roller (W), Roller Speed (S), Efficiency Factor (E) & Pay Ratio (PR) we can find Thickness of Lift given Compaction Production by Compaction Equipment using the formula - Lift Thickness = (Production due to Compaction*Number of Passes)/(16*Width of Roller*Roller Speed*Efficiency Factor*Pay Ratio).

Can the Thickness of Lift given Compaction Production by Compaction Equipment be negative?

No, the Thickness of Lift given Compaction Production by Compaction Equipment, measured in Length cannot be negative.

Which unit is used to measure Thickness of Lift given Compaction Production by Compaction Equipment?

Thickness of Lift given Compaction Production by Compaction Equipment is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Lift given Compaction Production by Compaction Equipment can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Lift given Compaction Production by Compaction Equipment Formula

Thickness of Lift given Compaction Production by Compaction Equipment Example

Thickness of Lift given Compaction Production by Compaction Equipment Solution

Thickness of Lift given Compaction Production by Compaction Equipment Formula Elements

Other formulas in Compaction Equipment category

How to Evaluate Thickness of Lift given Compaction Production by Compaction Equipment?

FAQs on Thickness of Lift given Compaction Production by Compaction Equipment

Variable Name