FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Horizontal Plate Fixed at Edges Formula

Fx Copy

LaTeX Copy

Thickness of Horizontal Plate is calculated based on the bending moment, the distance from the neutral axis, and the moment of inertia of the cross-section. Check FAQs

T h = {((0.7) \cdot (f horizontal) \cdot (\frac{{(L Horizontal)}^{2}}{f Edges}) \cdot (\frac{{(a)}^{4}}{{(L Horizontal)}^{4} + {(a)}^{4}}))}^{0.5}

T_h - Thickness of Horizontal Plate?f_horizontal - Maximum Pressure on Horizontal Plate?L_Horizontal - Length of Horizontal Plate?f_Edges - Maximum Stress in Horizontal Plate fixed at Edges?a - Effective Width of Horizontal Plate?

Thickness of Horizontal Plate Fixed at Edges Example

With values

With units

Only example

Here is how the Thickness of Horizontal Plate Fixed at Edges equation looks like with Values.

Here is how the Thickness of Horizontal Plate Fixed at Edges equation looks like with Units.

Here is how the Thickness of Horizontal Plate Fixed at Edges equation looks like.

3.7109 = {((0.7) \cdot (2.2) \cdot (\frac{{(127)}^{2}}{530}) \cdot (\frac{{(102)}^{4}}{{(127)}^{4} + {(102)}^{4}}))}^{0.5}

3.7109mm = {((0.7) \cdot (2.2N/mm²) \cdot (\frac{{(127mm)}^{2}}{530N/mm²}) \cdot (\frac{{(102mm)}^{4}}{{(127mm)}^{4} + {(102mm)}^{4}}))}^{0.5}

3.7109 = {((0.7) \cdot (2.2) \cdot (\frac{{(127)}^{2}}{530}) \cdot (\frac{{(102)}^{4}}{{(127)}^{4} + {(102)}^{4}}))}^{0.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Chemical Engineering » Category

Process Equipment Design » fx Thickness of Horizontal Plate Fixed at Edges

Thickness of Horizontal Plate Fixed at Edges Solution

Follow our step by step solution on how to calculate Thickness of Horizontal Plate Fixed at Edges?

FIRST Step Consider the formula

T h = {((0.7) \cdot (f horizontal) \cdot (\frac{{(L Horizontal)}^{2}}{f Edges}) \cdot (\frac{{(a)}^{4}}{{(L Horizontal)}^{4} + {(a)}^{4}}))}^{0.5}

Next Step Substitute values of Variables

∴

T h = {((0.7) \cdot (2.2N/mm²) \cdot (\frac{{(127mm)}^{2}}{530N/mm²}) \cdot (\frac{{(102mm)}^{4}}{{(127mm)}^{4} + {(102mm)}^{4}}))}^{0.5}

Next Step Convert Units

∴

T h = {((0.7) \cdot (2.2E+6Pa) \cdot (\frac{{(0.127m)}^{2}}{5.3E+8Pa}) \cdot (\frac{{(0.102m)}^{4}}{{(0.127m)}^{4} + {(0.102m)}^{4}}))}^{0.5}

Next Step Prepare to Evaluate

∴

T h = {((0.7) \cdot (2.2E+6) \cdot (\frac{{(0.127)}^{2}}{5.3E+8}) \cdot (\frac{{(0.102)}^{4}}{{(0.127)}^{4} + {(0.102)}^{4}}))}^{0.5}

Next Step Evaluate

∴

T h = 0.00371085373646984m

Next Step Convert to Output's Unit

∴

T h = 3.71085373646984mm

LAST Step Rounding Answer

∴

T h = 3.7109mm

Thickness of Horizontal Plate Fixed at Edges Formula Elements

Variables

Thickness of Horizontal Plate

Thickness of Horizontal Plate is calculated based on the bending moment, the distance from the neutral axis, and the moment of inertia of the cross-section.

Symbol: T_h

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Horizontal Plate

Maximum Pressure on Horizontal Plate

The Maximum Pressure on Horizontal Plate formula is defined as the highest pressure that a system, equipment or material can withstand without experiencing failure or damage.

Symbol: f_horizontal

Measurement: PressureUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Maximum Pressure on Horizontal Plate

Length of Horizontal Plate

Length of Horizontal Plate is a flat surface that is oriented parallel to the ground or any other reference plane.

Symbol: L_Horizontal

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Length of Horizontal Plate

Maximum Stress in Horizontal Plate fixed at Edges

Maximum Stress in Horizontal Plate fixed at Edges depends on the loading conditions and the geometry of the structure.

Symbol: f_Edges

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Maximum Stress in Horizontal Plate fixed at Edges

Effective Width of Horizontal Plate

Effective Width of Horizontal Plate refers to the distance across the plate in a direction perpendicular to its length.

Symbol: a

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Effective Width of Horizontal Plate

Other formulas in Lug or Bracket Support category

Go Maximum Compressive Load acting on Bracket

P Load = \frac{(4 \cdot (Wind Force)) \cdot (Height - c)}{N \cdot D bc} + (\frac{ΣW}{N})

Go Maximum Compressive Stress Parallel to Edge of Gusset Plate

f Compressive = (\frac{M GussetPlate}{Z}) \cdot (\frac{1}{\cos (Θ)})

Go Thickness of Gusset Plate

T g = (\frac{M GussetPlate}{\frac{f Compressive \cdot (h^{2})}{6}}) \cdot (\frac{1}{\cos (Θ)})

Go Maximum Combined Stress on Long Column

f = ((\frac{P Column}{N Column \cdot A Column}) \cdot (1 + (\frac{1}{7500}) \cdot {(\frac{l e}{r g})}^{2}) + (\frac{P Column \cdot e}{N Column \cdot Z}))

How to Evaluate Thickness of Horizontal Plate Fixed at Edges?

Thickness of Horizontal Plate Fixed at Edges evaluator uses Thickness of Horizontal Plate = ((0.7)*(Maximum Pressure on Horizontal Plate)*((Length of Horizontal Plate)^(2)/(Maximum Stress in Horizontal Plate fixed at Edges))*((Effective Width of Horizontal Plate)^(4)/((Length of Horizontal Plate)^(4)+(Effective Width of Horizontal Plate)^(4))))^(0.5) to evaluate the Thickness of Horizontal Plate, The Thickness of Horizontal Plate Fixed at Edges formula is to determine the maximum stresses, which can be compared to the allowable stress to determine the required thickness. Thickness of Horizontal Plate is denoted by T_h symbol.

How to evaluate Thickness of Horizontal Plate Fixed at Edges using this online evaluator? To use this online evaluator for Thickness of Horizontal Plate Fixed at Edges, enter Maximum Pressure on Horizontal Plate (f_horizontal), Length of Horizontal Plate (L_Horizontal), Maximum Stress in Horizontal Plate fixed at Edges (f_Edges) & Effective Width of Horizontal Plate (a) and hit the calculate button.

FAQs on Thickness of Horizontal Plate Fixed at Edges

What is the formula to find Thickness of Horizontal Plate Fixed at Edges?

The formula of Thickness of Horizontal Plate Fixed at Edges is expressed as Thickness of Horizontal Plate = ((0.7)*(Maximum Pressure on Horizontal Plate)*((Length of Horizontal Plate)^(2)/(Maximum Stress in Horizontal Plate fixed at Edges))*((Effective Width of Horizontal Plate)^(4)/((Length of Horizontal Plate)^(4)+(Effective Width of Horizontal Plate)^(4))))^(0.5). Here is an example- 3710.854 = ((0.7)*(2200000)*((0.127)^(2)/(530000000))*((0.102)^(4)/((0.127)^(4)+(0.102)^(4))))^(0.5).

How to calculate Thickness of Horizontal Plate Fixed at Edges?

With Maximum Pressure on Horizontal Plate (f_horizontal), Length of Horizontal Plate (L_Horizontal), Maximum Stress in Horizontal Plate fixed at Edges (f_Edges) & Effective Width of Horizontal Plate (a) we can find Thickness of Horizontal Plate Fixed at Edges using the formula - Thickness of Horizontal Plate = ((0.7)*(Maximum Pressure on Horizontal Plate)*((Length of Horizontal Plate)^(2)/(Maximum Stress in Horizontal Plate fixed at Edges))*((Effective Width of Horizontal Plate)^(4)/((Length of Horizontal Plate)^(4)+(Effective Width of Horizontal Plate)^(4))))^(0.5).

Can the Thickness of Horizontal Plate Fixed at Edges be negative?

No, the Thickness of Horizontal Plate Fixed at Edges, measured in Length cannot be negative.

Which unit is used to measure Thickness of Horizontal Plate Fixed at Edges?

Thickness of Horizontal Plate Fixed at Edges is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Horizontal Plate Fixed at Edges can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Horizontal Plate Fixed at Edges Formula

Thickness of Horizontal Plate Fixed at Edges Example

Thickness of Horizontal Plate Fixed at Edges Solution

Thickness of Horizontal Plate Fixed at Edges Formula Elements

Other formulas in Lug or Bracket Support category

How to Evaluate Thickness of Horizontal Plate Fixed at Edges?

FAQs on Thickness of Horizontal Plate Fixed at Edges

Variable Name