FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Eye of Knuckle Joint given Rod Diameter Formula

GoThickness of Eye End of Knuckle Joint given Bending Moment in Pin Formula

GoThickness of Eye End of Knuckle Joint given Bending Stress in Pin Formula

Fx Copy

LaTeX Copy

Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius. Check FAQs

b = 1.25 \cdot d r1

b - Thickess of Eye of Knuckle Joint?d_r1 - Diameter of Rod of Knuckle Joint?

Thickness of Eye of Knuckle Joint given Rod Diameter Example

With values

With units

Only example

Here is how the Thickness of Eye of Knuckle Joint given Rod Diameter equation looks like with Values.

Here is how the Thickness of Eye of Knuckle Joint given Rod Diameter equation looks like with Units.

Here is how the Thickness of Eye of Knuckle Joint given Rod Diameter equation looks like.

38.75 = 1.25 \cdot 31

38.75mm = 1.25 \cdot 31mm

38.75 = 1.25 \cdot 31

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Thickness of Eye of Knuckle Joint given Rod Diameter

Thickness of Eye of Knuckle Joint given Rod Diameter Solution

Follow our step by step solution on how to calculate Thickness of Eye of Knuckle Joint given Rod Diameter?

FIRST Step Consider the formula

b = 1.25 \cdot d r1

Next Step Substitute values of Variables

∴

b = 1.25 \cdot 31mm

Next Step Convert Units

∴

b = 1.25 \cdot 0.031m

Next Step Prepare to Evaluate

∴

b = 1.25 \cdot 0.031

Next Step Evaluate

∴

b = 0.03875m

LAST Step Convert to Output's Unit

∴

b = 38.75mm

Thickness of Eye of Knuckle Joint given Rod Diameter Formula Elements

Variables

Thickess of Eye of Knuckle Joint

Thickess of Eye of Knuckle Joint is the thickness of the eye of the nonforked part of the knuckle joint, measured perpendicular to the eye hole radius.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickess of Eye of Knuckle Joint

Diameter of Rod of Knuckle Joint

Diameter of Rod of Knuckle Joint is defined as the diameter of the end rods of a knuckle joint.

Symbol: d_r1

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Rod of Knuckle Joint

Other Formulas to find Thickess of Eye of Knuckle Joint

Go Thickness of Eye End of Knuckle Joint given Bending Moment in Pin

b = 4 \cdot (2 \cdot \frac{M b}{L} - \frac{a}{3})

Go Thickness of Eye End of Knuckle Joint given Bending Stress in Pin

b = 4 \cdot (\frac{π \cdot d^{3} \cdot σ b}{16 \cdot L} - \frac{a}{3})

Go Thickness of Eye End of Knuckle Joint given Tensile Stress in Eye

b = \frac{L}{σ te \cdot (d o - d)}

Go Thickness of Eye End of Knuckle Joint given Shear Stress in Eye

b = \frac{L}{τ e \cdot (d o - d)}

Other formulas in Eye category

Go Tensile Stress in Rod of Knuckle Joint

σ t = \frac{4 \cdot L}{π \cdot {d r1}^{2}}

Go Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

τ p = \frac{2 \cdot L}{π \cdot d^{2}}

Go Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

σ c = \frac{L}{b \cdot d}

Go Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

σ c = \frac{L}{2 \cdot a \cdot d}

How to Evaluate Thickness of Eye of Knuckle Joint given Rod Diameter?

Thickness of Eye of Knuckle Joint given Rod Diameter evaluator uses Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint to evaluate the Thickess of Eye of Knuckle Joint, The Thickness of eye of knuckle joint given Rod diameter is the thickness of the non-forked part of a knuckle joint and is measured along the eye hole axis. Thickess of Eye of Knuckle Joint is denoted by b symbol.

How to evaluate Thickness of Eye of Knuckle Joint given Rod Diameter using this online evaluator? To use this online evaluator for Thickness of Eye of Knuckle Joint given Rod Diameter, enter Diameter of Rod of Knuckle Joint (d_r1) and hit the calculate button.

FAQs on Thickness of Eye of Knuckle Joint given Rod Diameter

What is the formula to find Thickness of Eye of Knuckle Joint given Rod Diameter?

The formula of Thickness of Eye of Knuckle Joint given Rod Diameter is expressed as Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint. Here is an example- 38750 = 1.25*0.031.

How to calculate Thickness of Eye of Knuckle Joint given Rod Diameter?

With Diameter of Rod of Knuckle Joint (d_r1) we can find Thickness of Eye of Knuckle Joint given Rod Diameter using the formula - Thickess of Eye of Knuckle Joint = 1.25*Diameter of Rod of Knuckle Joint.

What are the other ways to Calculate Thickess of Eye of Knuckle Joint?

Here are the different ways to Calculate Thickess of Eye of Knuckle Joint-

Thickess of Eye of Knuckle Joint=4*(2*Bending Moment in Knuckle Pin/Load on Knuckle Joint-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint=4*((pi*Diameter of Knuckle Pin^3*Bending Stress in Knuckle Pin)/(16*Load on Knuckle Joint)-Thickess of Fork Eye of Knuckle Joint/3)
Thickess of Eye of Knuckle Joint=Load on Knuckle Joint/(Tensile Stress in Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin))

Can the Thickness of Eye of Knuckle Joint given Rod Diameter be negative?

No, the Thickness of Eye of Knuckle Joint given Rod Diameter, measured in Length cannot be negative.

Which unit is used to measure Thickness of Eye of Knuckle Joint given Rod Diameter?

Thickness of Eye of Knuckle Joint given Rod Diameter is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Eye of Knuckle Joint given Rod Diameter can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!