FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Cotter Joint Formula

GoThickness of Cotter given Tensile Stress in Socket Formula

GoThickness of Cotter given Shear Stress in Cotter Formula

Fx Copy

LaTeX Copy

Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force. Check FAQs

t c = 0.31 \cdot d

t_c - Thickness of Cotter?d - Diameter of Rod of Cotter Joint?

Thickness of Cotter Joint Example

With values

With units

Only example

Here is how the Thickness of Cotter Joint equation looks like with Values.

Here is how the Thickness of Cotter Joint equation looks like with Units.

Here is how the Thickness of Cotter Joint equation looks like.

11.0616 = 0.31 \cdot 35.6827

11.0616mm = 0.31 \cdot 35.6827mm

11.0616 = 0.31 \cdot 35.6827

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Thickness of Cotter Joint

Thickness of Cotter Joint Solution

Follow our step by step solution on how to calculate Thickness of Cotter Joint?

FIRST Step Consider the formula

t c = 0.31 \cdot d

Next Step Substitute values of Variables

∴

t c = 0.31 \cdot 35.6827mm

Next Step Convert Units

∴

t c = 0.31 \cdot 0.0357m

Next Step Prepare to Evaluate

∴

t c = 0.31 \cdot 0.0357

Next Step Evaluate

∴

t c = 0.011061637m

Next Step Convert to Output's Unit

∴

t c = 11.061637mm

LAST Step Rounding Answer

∴

t c = 11.0616mm

Thickness of Cotter Joint Formula Elements

Variables

Thickness of Cotter

Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force.

Symbol: t_c

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Cotter

Diameter of Rod of Cotter Joint

Diameter of Rod of Cotter Joint is defined as the length of the longest chord passing across the rod of a cotter joint end.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Rod of Cotter Joint

Other Formulas to find Thickness of Cotter

Go Thickness of Cotter given Tensile Stress in Socket

t c = \frac{(\frac{π}{4} \cdot ({d 1}^{2} - {d 2}^{2})) - \frac{F c}{σ t so}}{d 1 - d 2}

Go Thickness of Cotter given Shear Stress in Cotter

t c = \frac{L}{2 \cdot τ co \cdot b}

Go Thickness of Cotter given Compressive Stress in Spigot

t c = \frac{L}{σ c1 \cdot d 2}

Go Thickness of Cotter given Compressive Stress in Socket

t c = \frac{L}{(d 4 - d 2) \cdot σ cso}

Other formulas in Joint Geometry and Dimensions category

Go Minimum Diameter of Spigot in Cotter Joint Subjected to Crushing Stress

d 2 = \frac{L}{σ c \cdot t c}

Go Diameter of Spigot Collar given Rod Diameter

d 3 = 1.5 \cdot d

Go Diameter of Spigot of Cotter Joint given Shear Stress in Spigot

d 2 = \frac{L}{2 \cdot L a \cdot τ sp}

Go Diameter of Spigot of Cotter Joint given Compressive Stress

d 2 = d 4 - \frac{L}{t c \cdot σ c1}

How to Evaluate Thickness of Cotter Joint?

Thickness of Cotter Joint evaluator uses Thickness of Cotter = 0.31*Diameter of Rod of Cotter Joint to evaluate the Thickness of Cotter, The Thickness of Cotter joint formula is used to connect two rods subjected to axial tensile or compressive loads. It has uniform thickness and the width dimension is given a slight taper. Thickness of Cotter is denoted by t_c symbol.

How to evaluate Thickness of Cotter Joint using this online evaluator? To use this online evaluator for Thickness of Cotter Joint, enter Diameter of Rod of Cotter Joint (d) and hit the calculate button.

FAQs on Thickness of Cotter Joint

What is the formula to find Thickness of Cotter Joint?

The formula of Thickness of Cotter Joint is expressed as Thickness of Cotter = 0.31*Diameter of Rod of Cotter Joint. Here is an example- 9610 = 0.31*0.0356827.

How to calculate Thickness of Cotter Joint?

With Diameter of Rod of Cotter Joint (d) we can find Thickness of Cotter Joint using the formula - Thickness of Cotter = 0.31*Diameter of Rod of Cotter Joint.

What are the other ways to Calculate Thickness of Cotter?

Here are the different ways to Calculate Thickness of Cotter-

Thickness of Cotter=((pi/4*(Outside Diameter of Socket^2-Diameter of Spigot^2))-(Force on Cotter Joint)/Tensile Stress In Socket)/(Outside Diameter of Socket-Diameter of Spigot)
Thickness of Cotter=(Load on Cotter Joint)/(2*Shear Stress in Cotter*Mean Width of Cotter)
Thickness of Cotter=(Load on Cotter Joint)/(Compressive Stress in Spigot*Diameter of Spigot)

Can the Thickness of Cotter Joint be negative?

No, the Thickness of Cotter Joint, measured in Length cannot be negative.

Which unit is used to measure Thickness of Cotter Joint?

Thickness of Cotter Joint is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Cotter Joint can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!