FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Thickness of Cotter given Shear Stress in Cotter Formula

GoThickness of Cotter Joint Formula

GoThickness of Cotter given Tensile Stress in Socket Formula

Fx Copy

LaTeX Copy

Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force. Check FAQs

t c = \frac{L}{2 \cdot τ co \cdot b}

t_c - Thickness of Cotter?L - Load on Cotter Joint?τ_co - Shear Stress in Cotter?b - Mean Width of Cotter?

Thickness of Cotter given Shear Stress in Cotter Example

With values

With units

Only example

Here is how the Thickness of Cotter given Shear Stress in Cotter equation looks like with Values.

Here is how the Thickness of Cotter given Shear Stress in Cotter equation looks like with Units.

Here is how the Thickness of Cotter given Shear Stress in Cotter equation looks like.

21.4777 = \frac{50000}{2 \cdot 24 \cdot 48.5}

21.4777mm = \frac{50000N}{2 \cdot 24N/mm² \cdot 48.5mm}

21.4777 = \frac{50000}{2 \cdot 24 \cdot 48.5}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Thickness of Cotter given Shear Stress in Cotter

Thickness of Cotter given Shear Stress in Cotter Solution

Follow our step by step solution on how to calculate Thickness of Cotter given Shear Stress in Cotter?

FIRST Step Consider the formula

t c = \frac{L}{2 \cdot τ co \cdot b}

Next Step Substitute values of Variables

∴

t c = \frac{50000N}{2 \cdot 24N/mm² \cdot 48.5mm}

Next Step Convert Units

∴

t c = \frac{50000N}{2 \cdot 2.4E+7Pa \cdot 0.0485m}

Next Step Prepare to Evaluate

∴

t c = \frac{50000}{2 \cdot 2.4E+7 \cdot 0.0485}

Next Step Evaluate

∴

t c = 0.0214776632302405m

Next Step Convert to Output's Unit

∴

t c = 21.4776632302405mm

LAST Step Rounding Answer

∴

t c = 21.4777mm

Thickness of Cotter given Shear Stress in Cotter Formula Elements

Variables

Thickness of Cotter

Thickness of Cotter is the measure of how much broad is the cotter in direction perpendicular to axial force.

Symbol: t_c

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Cotter

Load on Cotter Joint

Load on cotter joint is basically the amount of load/force any part or joint, can bear or is acted upon or exerts.

Symbol: L

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Load on Cotter Joint

Shear Stress in Cotter

Shear Stress in Cotter is the amount of stress (cause deformation by slippage along a plane parallel to the imposed stress) generated into the cotter due to the shear force acting on it.

Symbol: τ_co

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Shear Stress in Cotter

Mean Width of Cotter

The mean Width of Cotter is defined as the average width of the cotter of a cotter joint.

Symbol: b

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Mean Width of Cotter

Other Formulas to find Thickness of Cotter

Go Thickness of Cotter Joint

t c = 0.31 \cdot d

Go Thickness of Cotter given Tensile Stress in Socket

t c = \frac{(\frac{π}{4} \cdot ({d 1}^{2} - {d 2}^{2})) - \frac{F c}{σ t so}}{d 1 - d 2}

Go Thickness of Cotter given Compressive Stress in Spigot

t c = \frac{L}{σ c1 \cdot d 2}

Go Thickness of Cotter given Compressive Stress in Socket

t c = \frac{L}{(d 4 - d 2) \cdot σ cso}

Other formulas in Joint Geometry and Dimensions category

Go Minimum Diameter of Spigot in Cotter Joint Subjected to Crushing Stress

d 2 = \frac{L}{σ c \cdot t c}

Go Diameter of Spigot Collar given Rod Diameter

d 3 = 1.5 \cdot d

Go Diameter of Spigot of Cotter Joint given Shear Stress in Spigot

d 2 = \frac{L}{2 \cdot L a \cdot τ sp}

Go Diameter of Spigot of Cotter Joint given Compressive Stress

d 2 = d 4 - \frac{L}{t c \cdot σ c1}

How to Evaluate Thickness of Cotter given Shear Stress in Cotter?

Thickness of Cotter given Shear Stress in Cotter evaluator uses Thickness of Cotter = (Load on Cotter Joint)/(2*Shear Stress in Cotter*Mean Width of Cotter) to evaluate the Thickness of Cotter, The Thickness of cotter given shear stress in cotter is the required thickness of the cotter of a cotter joint when a shear load acts onto it. Thickness of Cotter is denoted by t_c symbol.

How to evaluate Thickness of Cotter given Shear Stress in Cotter using this online evaluator? To use this online evaluator for Thickness of Cotter given Shear Stress in Cotter, enter Load on Cotter Joint (L), Shear Stress in Cotter (τ_co) & Mean Width of Cotter (b) and hit the calculate button.

FAQs on Thickness of Cotter given Shear Stress in Cotter

What is the formula to find Thickness of Cotter given Shear Stress in Cotter?

The formula of Thickness of Cotter given Shear Stress in Cotter is expressed as Thickness of Cotter = (Load on Cotter Joint)/(2*Shear Stress in Cotter*Mean Width of Cotter). Here is an example- 21477.66 = (50000)/(2*24000000*0.0485).

How to calculate Thickness of Cotter given Shear Stress in Cotter?

With Load on Cotter Joint (L), Shear Stress in Cotter (τ_co) & Mean Width of Cotter (b) we can find Thickness of Cotter given Shear Stress in Cotter using the formula - Thickness of Cotter = (Load on Cotter Joint)/(2*Shear Stress in Cotter*Mean Width of Cotter).

What are the other ways to Calculate Thickness of Cotter?

Here are the different ways to Calculate Thickness of Cotter-

Thickness of Cotter=0.31*Diameter of Rod of Cotter Joint
Thickness of Cotter=((pi/4*(Outside Diameter of Socket^2-Diameter of Spigot^2))-(Force on Cotter Joint)/Tensile Stress In Socket)/(Outside Diameter of Socket-Diameter of Spigot)
Thickness of Cotter=(Load on Cotter Joint)/(Compressive Stress in Spigot*Diameter of Spigot)

Can the Thickness of Cotter given Shear Stress in Cotter be negative?

No, the Thickness of Cotter given Shear Stress in Cotter, measured in Length cannot be negative.

Which unit is used to measure Thickness of Cotter given Shear Stress in Cotter?

Thickness of Cotter given Shear Stress in Cotter is usually measured using the Millimeter[mm] for Length. Meter[mm], Kilometer[mm], Decimeter[mm] are the few other units in which Thickness of Cotter given Shear Stress in Cotter can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Thickness of Cotter given Shear Stress in Cotter Formula

​GoThickness of Cotter Joint Formula

​GoThickness of Cotter given Tensile Stress in Socket Formula

Thickness of Cotter given Shear Stress in Cotter Example

Thickness of Cotter given Shear Stress in Cotter Solution

Thickness of Cotter given Shear Stress in Cotter Formula Elements

Other Formulas to find Thickness of Cotter

Other formulas in Joint Geometry and Dimensions category

How to Evaluate Thickness of Cotter given Shear Stress in Cotter?

FAQs on Thickness of Cotter given Shear Stress in Cotter

Variable Name

GoThickness of Cotter Joint Formula

GoThickness of Cotter given Tensile Stress in Socket Formula