FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Tension in Tight Side of Belt for Belt Transmission Dynamometer Formula

Fx Copy

LaTeX Copy

Tension in Tight Side of Belt is the force exerted on the tight side of a belt in a dynamometer, measuring the rotational force or torque. Check FAQs

T 1 = T 2 + \frac{W end \cdot L horizontal}{2 \cdot a pulley}

T₁ - Tension in Tight Side of Belt?T₂ - Tension in Slack Side of Belt?W_end - Weight at Outer End of Lever?L_horizontal - Distance between Weight and Center of Pulley?a_pulley - Distance between Loose Pulleys and T-Frame?

Tension in Tight Side of Belt for Belt Transmission Dynamometer Example

With values

With units

Only example

Here is how the Tension in Tight Side of Belt for Belt Transmission Dynamometer equation looks like with Values.

Here is how the Tension in Tight Side of Belt for Belt Transmission Dynamometer equation looks like with Units.

Here is how the Tension in Tight Side of Belt for Belt Transmission Dynamometer equation looks like.

26.3 = 19.0768 + \frac{19 \cdot 0.6843}{2 \cdot 0.9}

26.3N = 19.0768N + \frac{19N \cdot 0.6843m}{2 \cdot 0.9m}

26.3 = 19.0768 + \frac{19 \cdot 0.6843}{2 \cdot 0.9}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Theory of Machine » fx Tension in Tight Side of Belt for Belt Transmission Dynamometer

Tension in Tight Side of Belt for Belt Transmission Dynamometer Solution

Follow our step by step solution on how to calculate Tension in Tight Side of Belt for Belt Transmission Dynamometer?

FIRST Step Consider the formula

T 1 = T 2 + \frac{W end \cdot L horizontal}{2 \cdot a pulley}

Next Step Substitute values of Variables

∴

T 1 = 19.0768N + \frac{19N \cdot 0.6843m}{2 \cdot 0.9m}

Next Step Prepare to Evaluate

∴

T 1 = 19.0768 + \frac{19 \cdot 0.6843}{2 \cdot 0.9}

Next Step Evaluate

∴

T 1 = 26.2999966666667N

LAST Step Rounding Answer

∴

T 1 = 26.3N

Tension in Tight Side of Belt for Belt Transmission Dynamometer Formula Elements

Variables

Tension in Tight Side of Belt

Tension in Tight Side of Belt is the force exerted on the tight side of a belt in a dynamometer, measuring the rotational force or torque.

Symbol: T₁

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Tension in Tight Side of Belt

Tension in Slack Side of Belt

Tension in Slack Side of Belt is the force exerted on the slack side of a belt in a dynamometer, measuring the torque of a rotating shaft.

Symbol: T₂

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Tension in Slack Side of Belt

Weight at Outer End of Lever

Weight at Outer End of Lever is the force exerted at the outer end of a lever in a dynamometer, used to measure torque or rotational force.

Symbol: W_end

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Weight at Outer End of Lever

Distance between Weight and Center of Pulley

Distance between Weight and Center of Pulley is the length between the weight attached to a dynamometer and the center of the pulley.

Symbol: L_horizontal

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Distance between Weight and Center of Pulley

Distance between Loose Pulleys and T-Frame

Distance between Loose Pulleys and T-Frame is the measurement of the space between the loose pulleys and the T-frame in a dynamometer setup.

Symbol: a_pulley

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Distance between Loose Pulleys and T-Frame

Other formulas in Dynamometer category

Go Constant for Particular Shaft for Torsion Dynamometer

k = \frac{G \cdot J}{L shaft}

Go Distance Moved in One Revolution by Rope Brake Dynamometer

d = π \cdot (D wheel + d rope)

Go Load on Brake for Rope Brake Dynamometer

W = W dead - S

Go Tangential Effort for Epicyclic-Train Dynamometer

P t = \frac{W end \cdot L horizontal}{2 \cdot a gear}

How to Evaluate Tension in Tight Side of Belt for Belt Transmission Dynamometer?

Tension in Tight Side of Belt for Belt Transmission Dynamometer evaluator uses Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame) to evaluate the Tension in Tight Side of Belt, Tension in Tight Side of Belt for Belt Transmission Dynamometer formula is defined as a measure of the force exerted on the tight side of the belt in a belt transmission dynamometer, which is a device used to measure the torque or rotational force of an engine or other machine. Tension in Tight Side of Belt is denoted by T₁ symbol.

How to evaluate Tension in Tight Side of Belt for Belt Transmission Dynamometer using this online evaluator? To use this online evaluator for Tension in Tight Side of Belt for Belt Transmission Dynamometer, enter Tension in Slack Side of Belt (T₂), Weight at Outer End of Lever (W_end), Distance between Weight and Center of Pulley (L_horizontal) & Distance between Loose Pulleys and T-Frame (a_pulley) and hit the calculate button.

FAQs on Tension in Tight Side of Belt for Belt Transmission Dynamometer

What is the formula to find Tension in Tight Side of Belt for Belt Transmission Dynamometer?

The formula of Tension in Tight Side of Belt for Belt Transmission Dynamometer is expressed as Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame). Here is an example- 18.22317 = 19.07683+(19*0.6843)/(2*0.9).

How to calculate Tension in Tight Side of Belt for Belt Transmission Dynamometer?

With Tension in Slack Side of Belt (T₂), Weight at Outer End of Lever (W_end), Distance between Weight and Center of Pulley (L_horizontal) & Distance between Loose Pulleys and T-Frame (a_pulley) we can find Tension in Tight Side of Belt for Belt Transmission Dynamometer using the formula - Tension in Tight Side of Belt = Tension in Slack Side of Belt+(Weight at Outer End of Lever*Distance between Weight and Center of Pulley)/(2*Distance between Loose Pulleys and T-Frame).

Can the Tension in Tight Side of Belt for Belt Transmission Dynamometer be negative?

Yes, the Tension in Tight Side of Belt for Belt Transmission Dynamometer, measured in Force can be negative.

Which unit is used to measure Tension in Tight Side of Belt for Belt Transmission Dynamometer?

Tension in Tight Side of Belt for Belt Transmission Dynamometer is usually measured using the Newton[N] for Force. Exanewton[N], Meganewton[N], Kilonewton[N] are the few other units in which Tension in Tight Side of Belt for Belt Transmission Dynamometer can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Tension in Tight Side of Belt for Belt Transmission Dynamometer Formula

Tension in Tight Side of Belt for Belt Transmission Dynamometer Example

Tension in Tight Side of Belt for Belt Transmission Dynamometer Solution

Tension in Tight Side of Belt for Belt Transmission Dynamometer Formula Elements

Other formulas in Dynamometer category

How to Evaluate Tension in Tight Side of Belt for Belt Transmission Dynamometer?

FAQs on Tension in Tight Side of Belt for Belt Transmission Dynamometer

Variable Name