FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Tension Correction to Measured Length Formula

Fx Copy

LaTeX Copy

Tension Correction is a Correction applied to the measured length of a tape or chain in surveying to account for the sag or tension in the tape or chain, which can cause errors in measurement. Check FAQs

C p = (((P f - P i) \cdot s) \cdot \frac{100000}{A \cdot E s})

C_p - Tension Correction?P_f - Final Tension?P_i - Initial Tension?s - Measured Length?A - Area of Tape?E_s - Modulus of Elasticity of Steel?

Tension Correction to Measured Length Example

With values

With units

Only example

Here is how the Tension Correction to Measured Length equation looks like with Values.

Here is how the Tension Correction to Measured Length equation looks like with Units.

Here is how the Tension Correction to Measured Length equation looks like.

4.0959 = (((11.1 - 8) \cdot 10.993) \cdot \frac{100000}{4.16 \cdot 200000})

4.0959m = (((11.1N - 8N) \cdot 10.993m) \cdot \frac{100000}{4.16m² \cdot 200000MPa})

4.0959 = (((11.1 - 8) \cdot 10.993) \cdot \frac{100000}{4.16 \cdot 200000})

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Surveying Formulas » fx Tension Correction to Measured Length

Tension Correction to Measured Length Solution

Follow our step by step solution on how to calculate Tension Correction to Measured Length?

FIRST Step Consider the formula

C p = (((P f - P i) \cdot s) \cdot \frac{100000}{A \cdot E s})

Next Step Substitute values of Variables

∴

C p = (((11.1N - 8N) \cdot 10.993m) \cdot \frac{100000}{4.16m² \cdot 200000MPa})

Next Step Prepare to Evaluate

∴

C p = (((11.1 - 8) \cdot 10.993) \cdot \frac{100000}{4.16 \cdot 200000})

Next Step Evaluate

∴

C p = 4.09594951923077m

LAST Step Rounding Answer

∴

C p = 4.0959m

Tension Correction to Measured Length Formula Elements

Variables

Tension Correction

Tension Correction is a Correction applied to the measured length of a tape or chain in surveying to account for the sag or tension in the tape or chain, which can cause errors in measurement.

Symbol: C_p

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Tension Correction

Final Tension

The Final Tension is the actual tension applied during observation.

Symbol: P_f

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Final Tension

Initial Tension

Initial Tension is the initial force or stress applied to a structural element or a component of a structure before it undergoes any external loading.

Symbol: P_i

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Initial Tension

Measured Length

Measured Length is the length measured from steel tape during observation.

Symbol: s

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Measured Length

Area of Tape

Area of Tape is the cross-sectional area of a measuring tape, typically a steel or fiberglass tape used for distance measurement in the field.

Symbol: A

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Area of Tape

Modulus of Elasticity of Steel

Modulus of Elasticity of Steel, also known as Young's modulus, is a measure of the stiffness of the material.

Symbol: E_s

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Modulus of Elasticity of Steel

Other formulas in Correction for Tension and Sag to Measured Length category

Go Tape Cross-Sectional Area for Tension Correction to Measured Length

A = ((P f - P i) \cdot s) \cdot \frac{100000}{C p \cdot E s}

Go Tape Elasticity Modulus given Tension Correction to Measured Length

E s = ((P f - P i) \cdot s) \cdot \frac{100000}{C p \cdot A}

Go Sag Correction of Unsupported Tape

C s = \frac{(W^{2}) \cdot ({U l}^{3})}{24 \cdot ({P i}^{2})}

Go Tape Weight given Sag Correction of Unsupported Tape

W = {(\frac{C s \cdot 24 \cdot ({P i}^{2})}{{U l}^{3}})}^{\frac{1}{2}}

How to Evaluate Tension Correction to Measured Length?

Tension Correction to Measured Length evaluator uses Tension Correction = (((Final Tension-Initial Tension)*Measured Length)*100000/(Area of Tape*Modulus of Elasticity of Steel)) to evaluate the Tension Correction, The Tension Correction to Measured Length formula is defined as the correction applied to counteract the change in length of steel tape due to tension. Tension Correction is denoted by C_p symbol.

How to evaluate Tension Correction to Measured Length using this online evaluator? To use this online evaluator for Tension Correction to Measured Length, enter Final Tension (P_f), Initial Tension (P_i), Measured Length (s), Area of Tape (A) & Modulus of Elasticity of Steel (E_s) and hit the calculate button.

FAQs on Tension Correction to Measured Length

What is the formula to find Tension Correction to Measured Length?

The formula of Tension Correction to Measured Length is expressed as Tension Correction = (((Final Tension-Initial Tension)*Measured Length)*100000/(Area of Tape*Modulus of Elasticity of Steel)). Here is an example- 4.098558 = (((11.1-8)*10.993)*100000/(4.16*200000000000)).

How to calculate Tension Correction to Measured Length?

With Final Tension (P_f), Initial Tension (P_i), Measured Length (s), Area of Tape (A) & Modulus of Elasticity of Steel (E_s) we can find Tension Correction to Measured Length using the formula - Tension Correction = (((Final Tension-Initial Tension)*Measured Length)*100000/(Area of Tape*Modulus of Elasticity of Steel)).

Can the Tension Correction to Measured Length be negative?

No, the Tension Correction to Measured Length, measured in Length cannot be negative.

Which unit is used to measure Tension Correction to Measured Length?

Tension Correction to Measured Length is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Tension Correction to Measured Length can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Tension Correction to Measured Length Formula

Tension Correction to Measured Length Example

Tension Correction to Measured Length Solution

Tension Correction to Measured Length Formula Elements

Other formulas in Correction for Tension and Sag to Measured Length category

How to Evaluate Tension Correction to Measured Length?

FAQs on Tension Correction to Measured Length

Variable Name