FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Formula

Fx Copy

LaTeX Copy

Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure. Check FAQs

σ tf = \frac{L}{2 \cdot a \cdot (d o - d)}

σ_tf - Tensile Stress in Fork of Knuckle Joint?L - Load on Knuckle Joint?a - Thickess of Fork Eye of Knuckle Joint?d_o - Outer Diameter of Eye of Knuckle Joint?d - Diameter of Knuckle Pin?

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Example

With values

With units

Only example

Here is how the Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter equation looks like with Values.

Here is how the Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter equation looks like with Units.

Here is how the Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter equation looks like.

19.6713 = \frac{45000}{2 \cdot 26.6 \cdot (80 - 37)}

19.6713N/mm² = \frac{45000N}{2 \cdot 26.6mm \cdot (80mm - 37mm)}

19.6713 = \frac{45000}{2 \cdot 26.6 \cdot (80 - 37)}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Design of Machine Elements » fx Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Solution

Follow our step by step solution on how to calculate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

FIRST Step Consider the formula

σ tf = \frac{L}{2 \cdot a \cdot (d o - d)}

Next Step Substitute values of Variables

∴

σ tf = \frac{45000N}{2 \cdot 26.6mm \cdot (80mm - 37mm)}

Next Step Convert Units

∴

σ tf = \frac{45000N}{2 \cdot 0.0266m \cdot (0.08m - 0.037m)}

Next Step Prepare to Evaluate

∴

σ tf = \frac{45000}{2 \cdot 0.0266 \cdot (0.08 - 0.037)}

Next Step Evaluate

∴

σ tf = 19671271.201259Pa

Next Step Convert to Output's Unit

∴

σ tf = 19.671271201259N/mm²

LAST Step Rounding Answer

∴

σ tf = 19.6713N/mm²

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Formula Elements

Variables

Tensile Stress in Fork of Knuckle Joint

Tensile Stress in Fork of Knuckle Joint is the amount of tensile stress induced into the forked part of a knuckle joint and may lead to tensile failure.

Symbol: σ_tf

Measurement: StressUnit: N/mm²

Note: Value should be greater than 0.

Formulas to find Tensile Stress in Fork of Knuckle Joint

Load on Knuckle Joint

Load on Knuckle Joint is basically the amount of load/force any part, product, or joint of a knuckle joint can bear or is acted upon or exerts.

Symbol: L

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Load on Knuckle Joint

Thickess of Fork Eye of Knuckle Joint

Thickess of Fork Eye of Knuckle Joint is the thickness of the eye of the forked part of the knuckle joint, measured perpendicular to the eye hole radius.

Symbol: a

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickess of Fork Eye of Knuckle Joint

Outer Diameter of Eye of Knuckle Joint

Outer Diameter of Eye of Knuckle Joint is the diameter of the outer surface of the eye of the knuckle joint into which the knuckle pin is inserted.

Symbol: d_o

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Outer Diameter of Eye of Knuckle Joint

Diameter of Knuckle Pin

Diameter of Knuckle Pin is the diameter of the pin used in joining the eye end and the fork of a knuckle joint.

Symbol: d

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Diameter of Knuckle Pin

Other formulas in Eye category

Go Tensile Stress in Rod of Knuckle Joint

σ t = \frac{4 \cdot L}{π \cdot {d r1}^{2}}

Go Shear Stress in Pin of Knuckle Joint given Load and Pin Diameter

τ p = \frac{2 \cdot L}{π \cdot d^{2}}

Go Compressive Stress in Pin Inside Eye of Knuckle Joint given Load and Pin Dimensions

σ c = \frac{L}{b \cdot d}

Go Compressive Stress in Pin Inside Fork of Knuckle Joint given Load and Pin Dimensions

σ c = \frac{L}{2 \cdot a \cdot d}

How to Evaluate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter evaluator uses Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)) to evaluate the Tensile Stress in Fork of Knuckle Joint, The Tensile stress in fork of knuckle joint given load, outer diameter of eye and pin diameter is the amount of tensile stress that is induced into the forked end of the knuckle joint when the knuckle joint is loaded into tension loading. Tensile Stress in Fork of Knuckle Joint is denoted by σ_tf symbol.

How to evaluate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter using this online evaluator? To use this online evaluator for Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter, enter Load on Knuckle Joint (L), Thickess of Fork Eye of Knuckle Joint (a), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d) and hit the calculate button.

FAQs on Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

What is the formula to find Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

The formula of Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter is expressed as Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)). Here is an example- 2.2E-5 = 45000/(2*0.0266*(0.08-0.037)).

How to calculate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

With Load on Knuckle Joint (L), Thickess of Fork Eye of Knuckle Joint (a), Outer Diameter of Eye of Knuckle Joint (d_o) & Diameter of Knuckle Pin (d) we can find Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter using the formula - Tensile Stress in Fork of Knuckle Joint = Load on Knuckle Joint/(2*Thickess of Fork Eye of Knuckle Joint*(Outer Diameter of Eye of Knuckle Joint-Diameter of Knuckle Pin)).

Can the Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter be negative?

No, the Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter, measured in Stress cannot be negative.

Which unit is used to measure Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter is usually measured using the Newton per Square Millimeter[N/mm²] for Stress. Pascal[N/mm²], Newton per Square Meter[N/mm²], Kilonewton per Square Meter[N/mm²] are the few other units in which Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Formula

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Example

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Solution

Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter Formula Elements

Other formulas in Eye category

How to Evaluate Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter?

FAQs on Tensile Stress in Fork of Knuckle Joint given Load, Outer Diameter of Eye and Pin Diameter

Variable Name