FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Tensile Strength of Connected Part using Allowable Bearing Stress Formula

Fx Copy

LaTeX Copy

Tensile Strength MPA is the stress at the maximum on the engineering stress-strain curve in Megapascal. Check FAQs

TS = \frac{F p}{1.2}

TS - Tensile Strength MPA?F_p - Allowable Bearing Stress?

Tensile Strength of Connected Part using Allowable Bearing Stress Example

With values

With units

Only example

Here is how the Tensile Strength of Connected Part using Allowable Bearing Stress equation looks like with Values.

Here is how the Tensile Strength of Connected Part using Allowable Bearing Stress equation looks like with Units.

Here is how the Tensile Strength of Connected Part using Allowable Bearing Stress equation looks like.

8.1667 = \frac{9.8}{1.2}

8.1667MPa = \frac{9.8MPa}{1.2}

8.1667 = \frac{9.8}{1.2}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Civil » Category

Design of Steel Structures » fx Tensile Strength of Connected Part using Allowable Bearing Stress

Tensile Strength of Connected Part using Allowable Bearing Stress Solution

Follow our step by step solution on how to calculate Tensile Strength of Connected Part using Allowable Bearing Stress?

FIRST Step Consider the formula

TS = \frac{F p}{1.2}

Next Step Substitute values of Variables

∴

TS = \frac{9.8MPa}{1.2}

Next Step Convert Units

∴

TS = \frac{9.8E+6Pa}{1.2}

Next Step Prepare to Evaluate

∴

TS = \frac{9.8E+6}{1.2}

Next Step Evaluate

∴

TS = 8166666.66666667Pa

Next Step Convert to Output's Unit

∴

TS = 8.16666666666667MPa

LAST Step Rounding Answer

∴

TS = 8.1667MPa

Tensile Strength of Connected Part using Allowable Bearing Stress Formula Elements

Variables

Tensile Strength MPA

Tensile Strength MPA is the stress at the maximum on the engineering stress-strain curve in Megapascal.

Symbol: TS

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Strength MPA

Allowable Bearing Stress

Allowable Bearing Stress is the maximum bearing stress that can be applied to a material or a structural element without causing failure.

Symbol: F_p

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Allowable Bearing Stress

Other formulas in Design of Stiffeners under Loads category

Go Column-Web Depth Clear of Fillets

d c = \frac{4100 \cdot {t wc}^{3} \cdot \sqrt{F yc}}{P bf}

Go Thickness of Column Web given Column Web Depth Clear of Fillets

t wc = {(\frac{d c \cdot P bf}{4100 \cdot \sqrt{F yc}})}^{\frac{1}{3}}

Go Computed Force for Column-Web Depth of Fillets

P bf = \frac{4100 \cdot {t wc}^{3} \cdot \sqrt{F yc}}{d c}

Go Cross sectional area of Column Web Stiffeners

A cs = \frac{P bf - F yc \cdot t wc \cdot (t f + 5 \cdot K)}{F yst}

How to Evaluate Tensile Strength of Connected Part using Allowable Bearing Stress?

Tensile Strength of Connected Part using Allowable Bearing Stress evaluator uses Tensile Strength MPA = Allowable Bearing Stress/1.2 to evaluate the Tensile Strength MPA, The Tensile Strength of Connected Part using Allowable Bearing Stress formula is defined as the maximum load that a material can support without fracture when being stretched. Tensile Strength MPA is denoted by TS symbol.

How to evaluate Tensile Strength of Connected Part using Allowable Bearing Stress using this online evaluator? To use this online evaluator for Tensile Strength of Connected Part using Allowable Bearing Stress, enter Allowable Bearing Stress (F_p) and hit the calculate button.

FAQs on Tensile Strength of Connected Part using Allowable Bearing Stress

What is the formula to find Tensile Strength of Connected Part using Allowable Bearing Stress?

The formula of Tensile Strength of Connected Part using Allowable Bearing Stress is expressed as Tensile Strength MPA = Allowable Bearing Stress/1.2. Here is an example- 8.2E-6 = 9800000/1.2.

How to calculate Tensile Strength of Connected Part using Allowable Bearing Stress?

With Allowable Bearing Stress (F_p) we can find Tensile Strength of Connected Part using Allowable Bearing Stress using the formula - Tensile Strength MPA = Allowable Bearing Stress/1.2.

Can the Tensile Strength of Connected Part using Allowable Bearing Stress be negative?

No, the Tensile Strength of Connected Part using Allowable Bearing Stress, measured in Pressure cannot be negative.

Which unit is used to measure Tensile Strength of Connected Part using Allowable Bearing Stress?

Tensile Strength of Connected Part using Allowable Bearing Stress is usually measured using the Megapascal[MPa] for Pressure. Pascal[MPa], Kilopascal[MPa], Bar[MPa] are the few other units in which Tensile Strength of Connected Part using Allowable Bearing Stress can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!