FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Tearing strength of rivet Formula

Fx Copy

LaTeX Copy

Tearing strength is defined as the force required to start or to continue to tear a fabric, in either weft or warp direction, under specified conditions. Check FAQs

T strength = σ t \cdot (p - D rivet) \cdot t plate

T_strength - Tearing Strength?σ_t - Tensile Stress?p - Pitch of Rivet?D_rivet - Rivet Diameter?t_plate - Thickness of Plate?

Tearing strength of rivet Example

With values

With units

Only example

Here is how the Tearing strength of rivet equation looks like with Values.

Here is how the Tearing strength of rivet equation looks like with Units.

Here is how the Tearing strength of rivet equation looks like.

0.0042 = 0.173 \cdot (20 - 18) \cdot 12

0.0042kN = 0.173MPa \cdot (20mm - 18mm) \cdot 12mm

0.0042 = 0.173 \cdot (20 - 18) \cdot 12

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Physics » Category

Mechanical » Category

Strength of Materials » fx Tearing strength of rivet

Tearing strength of rivet Solution

Follow our step by step solution on how to calculate Tearing strength of rivet?

FIRST Step Consider the formula

T strength = σ t \cdot (p - D rivet) \cdot t plate

Next Step Substitute values of Variables

∴

T strength = 0.173MPa \cdot (20mm - 18mm) \cdot 12mm

Next Step Convert Units

∴

T strength = 173000Pa \cdot (0.02m - 0.018m) \cdot 0.012m

Next Step Prepare to Evaluate

∴

T strength = 173000 \cdot (0.02 - 0.018) \cdot 0.012

Next Step Evaluate

∴

T strength = 4.152N

Next Step Convert to Output's Unit

∴

T strength = 0.004152kN

LAST Step Rounding Answer

∴

T strength = 0.0042kN

Tearing strength of rivet Formula Elements

Variables

Tearing Strength

Tearing strength is defined as the force required to start or to continue to tear a fabric, in either weft or warp direction, under specified conditions.

Symbol: T_strength

Measurement: ForceUnit: kN

Note: Value should be greater than 0.

Formulas to find Tearing Strength

Tensile Stress

Tensile stress can be defined as the magnitude of force applied along an elastic rod, which is divided by the cross-sectional area of the rod in a direction perpendicular to the applied force.

Symbol: σ_t

Measurement: PressureUnit: MPa

Note: Value should be greater than 0.

Formulas to find Tensile Stress

Pitch of Rivet

Pitch of Rivet is defined as the distance between the centers of adjacent rivets that hold together the parts of a built member.

Symbol: p

Measurement: LengthUnit: mm

Note: Value can be positive or negative.

Formulas to find Pitch of Rivet

Rivet Diameter

Rivet Diameter is offered from 1/16-inch (1.6 mm) to 3/8-inch (9.5 mm) in diameter (other sizes are considered highly special) and can be up to 8 inches (203 mm) long.

Symbol: D_rivet

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Rivet Diameter

Thickness of Plate

The thickness of plate is the state or quality of being thick. The measure of the smallest dimension of a solid figure: a board of two-inch thickness.

Symbol: t_plate

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Thickness of Plate

Other formulas in Stress in Rivet category

Go Pitch of rivet given tearing strength of rivet

p = D rivet + (\frac{T strength}{σ t \cdot t plate})

Go Shearing strength if rivet is in single shear

V n = (1 \cdot n \cdot (\frac{π}{4}) \cdot 𝜏 \cdot ({D rivet}^{2}))

Go Number of rivets given shearing strength if rivet is in single shear

n = \frac{V n}{1 \cdot (\frac{π}{4}) \cdot 𝜏 \cdot ({D rivet}^{2})}

Go Shearing strength if rivet is in double shear

V n = (2 \cdot n \cdot (\frac{π}{4}) \cdot 𝜏 \cdot ({D rivet}^{2}))

How to Evaluate Tearing strength of rivet?

Tearing strength of rivet evaluator uses Tearing Strength = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate to evaluate the Tearing Strength, The Tearing strength of rivet formula is defined as the force required to start or to continue to tear a fabric, in either weft or warp direction, under specified conditions. Tearing Strength is denoted by T_strength symbol.

How to evaluate Tearing strength of rivet using this online evaluator? To use this online evaluator for Tearing strength of rivet, enter Tensile Stress (σ_t), Pitch of Rivet (p), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate) and hit the calculate button.

FAQs on Tearing strength of rivet

What is the formula to find Tearing strength of rivet?

The formula of Tearing strength of rivet is expressed as Tearing Strength = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate. Here is an example- 4.2E-6 = 173000*(0.02-0.018)*0.012.

How to calculate Tearing strength of rivet?

With Tensile Stress (σ_t), Pitch of Rivet (p), Rivet Diameter (D_rivet) & Thickness of Plate (t_plate) we can find Tearing strength of rivet using the formula - Tearing Strength = Tensile Stress*(Pitch of Rivet-Rivet Diameter)*Thickness of Plate.

Can the Tearing strength of rivet be negative?

Yes, the Tearing strength of rivet, measured in Force can be negative.

Which unit is used to measure Tearing strength of rivet?

Tearing strength of rivet is usually measured using the Kilonewton[kN] for Force. Newton[kN], Exanewton[kN], Meganewton[kN] are the few other units in which Tearing strength of rivet can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

Tearing strength of rivet Formula

Tearing strength of rivet Example

Tearing strength of rivet Solution

Tearing strength of rivet Formula Elements

Other formulas in Stress in Rivet category

How to Evaluate Tearing strength of rivet?

FAQs on Tearing strength of rivet

Variable Name