Surface unevenness Formula

Fx Copy
LaTeX Copy
Surface unevenness is the degree of roughness of a surface. Check FAQs
Ssd=1.11(Zw0.384)
Ssd - Surface Unevenness?Zw - Metal Removal Rate?

Surface unevenness Example

With values
With units
Only example

Here is how the Surface unevenness equation looks like with Values.

Here is how the Surface unevenness equation looks like with Units.

Here is how the Surface unevenness equation looks like.

2.6873Edit=1.11(10Edit0.384)
You are here -
HomeIcon Home » Category Engineering » Category Production Engineering » Category Unconventional machining processes » fx Surface unevenness

Surface unevenness Solution

Follow our step by step solution on how to calculate Surface unevenness?

FIRST Step Consider the formula
Ssd=1.11(Zw0.384)
Next Step Substitute values of Variables
Ssd=1.11(10m³/s0.384)
Next Step Prepare to Evaluate
Ssd=1.11(100.384)
Next Step Evaluate
Ssd=2.68734224187716m
LAST Step Rounding Answer
Ssd=2.6873m

Surface unevenness Formula Elements

Variables
Surface Unevenness
Surface unevenness is the degree of roughness of a surface.
Symbol: Ssd
Measurement: LengthUnit: m
Note: Value can be positive or negative.
Metal Removal Rate
Metal removal rate (MRR) is the amount of material removed per time unit (usually per minute) when performing machining operations such as using a lathe or milling machine.
Symbol: Zw
Measurement: Volumetric Flow RateUnit: m³/s
Note: Value should be greater than 0.

Other formulas in Surface Unevenness category

​Go MRR for given surface unevenness
Zsd=(δsd1.11)2.604

How to Evaluate Surface unevenness?

Surface unevenness evaluator uses Surface Unevenness = 1.11*(Metal Removal Rate^0.384) to evaluate the Surface Unevenness, The Surface unevenness formula is defined as the degree of surface roughness produced due to given mrr. Surface Unevenness is denoted by Ssd symbol.

How to evaluate Surface unevenness using this online evaluator? To use this online evaluator for Surface unevenness, enter Metal Removal Rate (Zw) and hit the calculate button.

FAQs on Surface unevenness

What is the formula to find Surface unevenness?
The formula of Surface unevenness is expressed as Surface Unevenness = 1.11*(Metal Removal Rate^0.384). Here is an example- 2.687342 = 1.11*(10^0.384).
How to calculate Surface unevenness?
With Metal Removal Rate (Zw) we can find Surface unevenness using the formula - Surface Unevenness = 1.11*(Metal Removal Rate^0.384).
Can the Surface unevenness be negative?
Yes, the Surface unevenness, measured in Length can be negative.
Which unit is used to measure Surface unevenness?
Surface unevenness is usually measured using the Meter[m] for Length. Millimeter[m], Kilometer[m], Decimeter[m] are the few other units in which Surface unevenness can be measured.
Copied!