FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Formula

GoSurface to Volume Ratio of Flat End Cylinder given Lateral Surface Area Formula

GoSurface to Volume Ratio of Flat End Cylinder Formula

Fx Copy

LaTeX Copy

Surface to Volume Ratio of Flat End Cylinder is the numerical ratio of the total surface area of Flat End Cylinder to the volume of the Flat End Cylinder. Check FAQs

R A/V = \frac{LSA + (π \cdot r \cdot \sqrt{r^{2} + h^{2}}) + (π \cdot r^{2})}{(π - \frac{4}{3}) \cdot r^{2} \cdot h}

R_A/V - Surface to Volume Ratio of Flat End Cylinder?LSA - Lateral Surface Area of Flat End Cylinder?r - Radius of Flat End Cylinder?h - Height of Flat End Cylinder?π - Archimedes' constant?

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Example

With values

With units

Only example

Here is how the Surface to Volume Ratio of Flat End Cylinder given Radius and Height equation looks like with Values.

Here is how the Surface to Volume Ratio of Flat End Cylinder given Radius and Height equation looks like with Units.

Here is how the Surface to Volume Ratio of Flat End Cylinder given Radius and Height equation looks like.

0.7701 = \frac{135 + (3.1416 \cdot 5 \cdot \sqrt{5^{2} + 12^{2}}) + (3.1416 \cdot 5^{2})}{(3.1416 - \frac{4}{3}) \cdot 5^{2} \cdot 12}

0.7701m⁻¹ = \frac{135m² + (3.1416 \cdot 5m \cdot \sqrt{{5m}^{2} + {12m}^{2}}) + (3.1416 \cdot {5m}^{2})}{(3.1416 - \frac{4}{3}) \cdot {5m}^{2} \cdot 12m}

0.7701 = \frac{135 + (3.1416 \cdot 5 \cdot \sqrt{5^{2} + 12^{2}}) + (3.1416 \cdot 5^{2})}{(3.1416 - \frac{4}{3}) \cdot 5^{2} \cdot 12}

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Math » Category

Geometry » Category

3D Geometry » fx Surface to Volume Ratio of Flat End Cylinder given Radius and Height

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Solution

Follow our step by step solution on how to calculate Surface to Volume Ratio of Flat End Cylinder given Radius and Height?

FIRST Step Consider the formula

R A/V = \frac{LSA + (π \cdot r \cdot \sqrt{r^{2} + h^{2}}) + (π \cdot r^{2})}{(π - \frac{4}{3}) \cdot r^{2} \cdot h}

Next Step Substitute values of Variables

∴

R A/V = \frac{135m² + (π \cdot 5m \cdot \sqrt{{5m}^{2} + {12m}^{2}}) + (π \cdot {5m}^{2})}{(π - \frac{4}{3}) \cdot {5m}^{2} \cdot 12m}

Next Step Substitute values of Constants

∴

R A/V = \frac{135m² + (3.1416 \cdot 5m \cdot \sqrt{{5m}^{2} + {12m}^{2}}) + (3.1416 \cdot {5m}^{2})}{(3.1416 - \frac{4}{3}) \cdot {5m}^{2} \cdot 12m}

Next Step Prepare to Evaluate

∴

R A/V = \frac{135 + (3.1416 \cdot 5 \cdot \sqrt{5^{2} + 12^{2}}) + (3.1416 \cdot 5^{2})}{(3.1416 - \frac{4}{3}) \cdot 5^{2} \cdot 12}

Next Step Evaluate

∴

R A/V = 0.770065322201379m⁻¹

LAST Step Rounding Answer

∴

R A/V = 0.7701m⁻¹

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Formula Elements

Variables

Constants

Functions

Surface to Volume Ratio of Flat End Cylinder

Surface to Volume Ratio of Flat End Cylinder is the numerical ratio of the total surface area of Flat End Cylinder to the volume of the Flat End Cylinder.

Symbol: R_A/V

Measurement: Reciprocal LengthUnit: m⁻¹

Note: Value should be greater than 0.

Formulas to find Surface to Volume Ratio of Flat End Cylinder

Lateral Surface Area of Flat End Cylinder

Lateral Surface Area of Flat End Cylinder is the total quantity of plane enclosed on the lateral curved surface of the Flat End Cylinder.

Symbol: LSA

Measurement: AreaUnit: m²

Note: Value should be greater than 0.

Formulas to find Lateral Surface Area of Flat End Cylinder

Radius of Flat End Cylinder

Radius of Flat End Cylinder is the distance between the center and any point on the circumference of the base circular face of the Flat End Cylinder.

Symbol: r

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Radius of Flat End Cylinder

Height of Flat End Cylinder

Height of Flat End Cylinder is the vertical distance from the bottom circular face to the top of the Flat End Cylinder.

Symbol: h

Measurement: LengthUnit: m

Note: Value should be greater than 0.

Formulas to find Height of Flat End Cylinder

Archimedes' constant

Archimedes' constant is a mathematical constant that represents the ratio of the circumference of a circle to its diameter.

Symbol: π

Value: 3.14159265358979323846264338327950288

sqrt

A square root function is a function that takes a non-negative number as an input and returns the square root of the given input number.

Syntax: sqrt(Number)

Other Formulas to find Surface to Volume Ratio of Flat End Cylinder

Go Surface to Volume Ratio of Flat End Cylinder given Lateral Surface Area

R A/V = \frac{LSA + (π \cdot r \cdot l Side) + (π \cdot r^{2})}{(π - \frac{4}{3}) \cdot r^{2} \cdot h}

Go Surface to Volume Ratio of Flat End Cylinder

R A/V = \frac{(((2 \cdot π) - 4) \cdot h \cdot r) + (π \cdot r \cdot l Side) + (π \cdot r^{2})}{(π - \frac{4}{3}) \cdot r^{2} \cdot h}

Go Surface to Volume Ratio of Flat End Cylinder given Side Length and Height

R A/V = \frac{LSA + (π \cdot \sqrt{{l Side}^{2} - h^{2}} \cdot l Side) + (π \cdot ({l Side}^{2} - h^{2}))}{(π - \frac{4}{3}) \cdot ({l Side}^{2} - h^{2}) \cdot h}

Go Surface to Volume Ratio of Flat End Cylinder given Straight Edge Length

R A/V = \frac{LSA + (π \cdot \frac{l e(Straight)}{2} \cdot l Side) + (π \cdot {(\frac{l e(Straight)}{2})}^{2})}{(π - \frac{4}{3}) \cdot {(\frac{l e(Straight)}{2})}^{2} \cdot h}

How to Evaluate Surface to Volume Ratio of Flat End Cylinder given Radius and Height?

Surface to Volume Ratio of Flat End Cylinder given Radius and Height evaluator uses Surface to Volume Ratio of Flat End Cylinder = (Lateral Surface Area of Flat End Cylinder+(pi*Radius of Flat End Cylinder*sqrt(Radius of Flat End Cylinder^2+Height of Flat End Cylinder^2))+(pi*Radius of Flat End Cylinder^2))/((pi-4/3)*Radius of Flat End Cylinder^2*Height of Flat End Cylinder) to evaluate the Surface to Volume Ratio of Flat End Cylinder, Surface to Volume Ratio of Flat End Cylinder given Radius and Height formula is defined as the numerical ratio of the total surface area of Flat End Cylinder to the volume of the Flat End Cylinder, and is calculated using lateral surface area, height and radius of Flat End Cylinder. Surface to Volume Ratio of Flat End Cylinder is denoted by R_A/V symbol.

How to evaluate Surface to Volume Ratio of Flat End Cylinder given Radius and Height using this online evaluator? To use this online evaluator for Surface to Volume Ratio of Flat End Cylinder given Radius and Height, enter Lateral Surface Area of Flat End Cylinder (LSA), Radius of Flat End Cylinder (r) & Height of Flat End Cylinder (h) and hit the calculate button.

FAQs on Surface to Volume Ratio of Flat End Cylinder given Radius and Height

What is the formula to find Surface to Volume Ratio of Flat End Cylinder given Radius and Height?

The formula of Surface to Volume Ratio of Flat End Cylinder given Radius and Height is expressed as Surface to Volume Ratio of Flat End Cylinder = (Lateral Surface Area of Flat End Cylinder+(pi*Radius of Flat End Cylinder*sqrt(Radius of Flat End Cylinder^2+Height of Flat End Cylinder^2))+(pi*Radius of Flat End Cylinder^2))/((pi-4/3)*Radius of Flat End Cylinder^2*Height of Flat End Cylinder). Here is an example- 0.770065 = (135+(pi*5*sqrt(5^2+12^2))+(pi*5^2))/((pi-4/3)*5^2*12).

How to calculate Surface to Volume Ratio of Flat End Cylinder given Radius and Height?

With Lateral Surface Area of Flat End Cylinder (LSA), Radius of Flat End Cylinder (r) & Height of Flat End Cylinder (h) we can find Surface to Volume Ratio of Flat End Cylinder given Radius and Height using the formula - Surface to Volume Ratio of Flat End Cylinder = (Lateral Surface Area of Flat End Cylinder+(pi*Radius of Flat End Cylinder*sqrt(Radius of Flat End Cylinder^2+Height of Flat End Cylinder^2))+(pi*Radius of Flat End Cylinder^2))/((pi-4/3)*Radius of Flat End Cylinder^2*Height of Flat End Cylinder). This formula also uses Archimedes' constant and Square Root (sqrt) function(s).

What are the other ways to Calculate Surface to Volume Ratio of Flat End Cylinder?

Here are the different ways to Calculate Surface to Volume Ratio of Flat End Cylinder-

Surface to Volume Ratio of Flat End Cylinder=(Lateral Surface Area of Flat End Cylinder+(pi*Radius of Flat End Cylinder*Side Length of Flat End Cylinder)+(pi*Radius of Flat End Cylinder^2))/((pi-4/3)*Radius of Flat End Cylinder^2*Height of Flat End Cylinder)
Surface to Volume Ratio of Flat End Cylinder=((((2*pi)-4)*Height of Flat End Cylinder*Radius of Flat End Cylinder)+(pi*Radius of Flat End Cylinder*Side Length of Flat End Cylinder)+(pi*Radius of Flat End Cylinder^2))/((pi-4/3)*Radius of Flat End Cylinder^2*Height of Flat End Cylinder)
Surface to Volume Ratio of Flat End Cylinder=(Lateral Surface Area of Flat End Cylinder+(pi*sqrt(Side Length of Flat End Cylinder^2-Height of Flat End Cylinder^2)*Side Length of Flat End Cylinder)+(pi*(Side Length of Flat End Cylinder^2-Height of Flat End Cylinder^2)))/((pi-4/3)*(Side Length of Flat End Cylinder^2-Height of Flat End Cylinder^2)*Height of Flat End Cylinder)

Can the Surface to Volume Ratio of Flat End Cylinder given Radius and Height be negative?

No, the Surface to Volume Ratio of Flat End Cylinder given Radius and Height, measured in Reciprocal Length cannot be negative.

Which unit is used to measure Surface to Volume Ratio of Flat End Cylinder given Radius and Height?

Surface to Volume Ratio of Flat End Cylinder given Radius and Height is usually measured using the 1 per Meter[m⁻¹] for Reciprocal Length. 1 per Kilometer[m⁻¹], 1 per Mile[m⁻¹], 1 per Yard[m⁻¹] are the few other units in which Surface to Volume Ratio of Flat End Cylinder given Radius and Height can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Formula

​GoSurface to Volume Ratio of Flat End Cylinder given Lateral Surface Area Formula

​GoSurface to Volume Ratio of Flat End Cylinder Formula

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Example

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Solution

Surface to Volume Ratio of Flat End Cylinder given Radius and Height Formula Elements

Other Formulas to find Surface to Volume Ratio of Flat End Cylinder

How to Evaluate Surface to Volume Ratio of Flat End Cylinder given Radius and Height?

FAQs on Surface to Volume Ratio of Flat End Cylinder given Radius and Height

Variable Name

GoSurface to Volume Ratio of Flat End Cylinder given Lateral Surface Area Formula

GoSurface to Volume Ratio of Flat End Cylinder Formula