FormulaDen.com

Physics Chemistry Math Chemical Engineering Civil Electrical Electronics Electronics and Instrumentation Materials Science Mechanical Production Engineering Financial Health

Stripping Force Formula

Fx Copy

LaTeX Copy

Stripper Force is the force applied by a stripper plate or stripper ring to remove the formed part from the punch after the forming operation is completed. Check FAQs

P s = K \cdot L cut \cdot t blank

P_s - Stripper Force?K - Stripping Constant?L_cut - Perimeter of Cut?t_blank - Blank Thickness?

Stripping Force Example

With values

With units

Only example

Here is how the Stripping Force equation looks like with Values.

Here is how the Stripping Force equation looks like with Units.

Here is how the Stripping Force equation looks like.

0.0001 = 0.02 \cdot 616.6667 \cdot 8.99

0.0001N = 0.02 \cdot 616.6667mm \cdot 8.99mm

0.0001 = 0.02 \cdot 616.6667 \cdot 8.99

Tip: Use pencil ( Pencil

) icon above to edit Input Values and Units.

Calculate

Recalculate

Solution

Copy

Reset

You are here -

Home » Category

Engineering » Category

Production Engineering » Category

Sheet Metal Operations » fx Stripping Force

Stripping Force Solution

Follow our step by step solution on how to calculate Stripping Force?

FIRST Step Consider the formula

P s = K \cdot L cut \cdot t blank

Next Step Substitute values of Variables

∴

P s = 0.02 \cdot 616.6667mm \cdot 8.99mm

Next Step Convert Units

∴

P s = 0.02 \cdot 0.6167m \cdot 0.009m

Next Step Prepare to Evaluate

∴

P s = 0.02 \cdot 0.6167 \cdot 0.009

Next Step Evaluate

∴

P s = 0.00011087667266N

LAST Step Rounding Answer

∴

P s = 0.0001N

Stripping Force Formula Elements

Variables

Stripper Force

Stripper Force is the force applied by a stripper plate or stripper ring to remove the formed part from the punch after the forming operation is completed.

Symbol: P_s

Measurement: ForceUnit: N

Note: Value should be greater than 0.

Formulas to find Stripper Force

Stripping Constant

Stripping Constant is the empirical constant used to calculate stripping force which is the force applied by a stripper plate.

Symbol: K

Measurement: NAUnit: Unitless

Note: Value can be positive or negative.

Formulas to find Stripping Constant

Perimeter of Cut

Perimeter of Cut is the total length of the cut edge produced in a material during the punching process.

Symbol: L_cut

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Perimeter of Cut

Blank Thickness

Blank Thickness is the thickness of the material being worked on before any operations are performed on it.

Symbol: t_blank

Measurement: LengthUnit: mm

Note: Value should be greater than 0.

Formulas to find Blank Thickness

Other formulas in Stripping Operation category

Go Thickness of Stock given Stripper Force

t blank = \frac{P s}{K \cdot L cut}

Go Perimeter of Cut given Stripper Force

L cut = \frac{P s}{K \cdot t blank}

How to Evaluate Stripping Force?

Stripping Force evaluator uses Stripper Force = Stripping Constant*Perimeter of Cut*Blank Thickness to evaluate the Stripper Force, Stripping Force is the force required to strip or remove the punched part from the sheet metal and it is calculated as the product of the stripping constant, the perimeter of the cut from punching, and the stock thickness during stripping. Stripper Force is denoted by P_s symbol.

How to evaluate Stripping Force using this online evaluator? To use this online evaluator for Stripping Force, enter Stripping Constant (K), Perimeter of Cut (L_cut) & Blank Thickness (t_blank) and hit the calculate button.

FAQs on Stripping Force

What is the formula to find Stripping Force?

The formula of Stripping Force is expressed as Stripper Force = Stripping Constant*Perimeter of Cut*Blank Thickness. Here is an example- 0.000111 = 0.02*0.6166667*0.00899.

How to calculate Stripping Force?

With Stripping Constant (K), Perimeter of Cut (L_cut) & Blank Thickness (t_blank) we can find Stripping Force using the formula - Stripper Force = Stripping Constant*Perimeter of Cut*Blank Thickness.

Can the Stripping Force be negative?

No, the Stripping Force, measured in Force cannot be negative.

Which unit is used to measure Stripping Force?

Stripping Force is usually measured using the Newton[N] for Force. Exanewton[N], Meganewton[N], Kilonewton[N] are the few other units in which Stripping Force can be measured.

Let Others Know

✖

Facebook

Twitter

Copied!

: Value
: Unit

Stripping Force Formula

Stripping Force Example

Stripping Force Solution

Stripping Force Formula Elements

Other formulas in Stripping Operation category

How to Evaluate Stripping Force?

FAQs on Stripping Force

Variable Name